Yamaha GRIZZLY 450 YFM45FGY Owner's Manual page 100

1
1. Quick fastener screw
2. Panel C
To install the panel
1. Place the panel in the original position, and
8
then install the quick fastener screws.
2. Place the carrier in the original position, and
then install the carrier bolts under the fenders.
3. Install the carrier top bolts, and then tighten all
bolts to the specified torques.
Tightening torques:
Carrier bolt (top):
34 Nm (3.4 m·kgf, 24 ft·lbf)
Carrier bolt (under fenders):
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Panel E
2
To remove the panel
Remove the bolts, and then take the panel off.
1. Panel E
2. Bolt
8-13