Replacing A Headlight Bulb - Yamaha GRIZZLY 450 YFM45FGY Owner's Manual

Table of Contents

Advertisement

2. Remove the blown fuse, and then install a
new fuse of the specified amperage.
Specified fuses:
Main fuse:
30.0 A
Headlight fuse:
15.0 A
Ignition fuse:
10.0 A
Four-wheel-drive motor fuse:
10.0 A
Signaling system fuse:
10.0 A
Auxiliary DC jack fuse:
10.0 A
Backup fuse:
10.0 A
EWB02171
WARNING
Always use a fuse of the specified rating, and
never use a substitute object in place of the
proper fuse. An improper fuse or a substitute
object can cause damage to the electrical sys-
tem, which could lead to a fire.
3. Turn the key to "ON" and turn on the electrical
circuits to check if the devices operate.
4. If the fuse immediately blows again, have a
Yamaha dealer check the electrical system.
EBU25480

Replacing a headlight bulb

If a headlight bulb burns out, replace it as follows.
1. Remove the cover at the rear of the headlight
by pulling it off.
1. Cover at the rear of the headlight
2. Remove the headlight bulb holder cover by
pulling it off.
8-54
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents