Pre-Operation Checks; Pre-Operation Check List - Yamaha BLASTER YFS200W Owner's Manual

EBU19200
1
EBU19220

Pre-operation check list

2
Before operating this ATV, be sure to check the items listed in the following table.
3
NOTE:
The maintenance of some items in the table has to be performed by a Yamaha dealer. Refer to the "Periodic
4
maintenance and lubrication chart" on page 8-3 to determine which service should be performed by a
Yamaha dealer.
5
ITEM
6
Fuel
7
8
2-stroke engine oil
9
Transmission oil
10
11
Front brake

PRE-OPERATION CHECKS

Check fuel level in fuel tank, and add recommended fuel if neces-
G
sary.
Check fuel line for leakage. Correct if necessary.
G
Check oil level in oil tank, and add recommended oil to specified
G
level if necessary.
Check ATV for oil leakage. Correct if necessary.
G
Check oil level in transmission case, and add recommended oil to
G
specified level if necessary.
Check ATV for oil leakage. Correct if necessary.
G
Check operation. If soft or spongy, have Yamaha dealer bleed
G
hydraulic system.
Check brake pads for wear, and replace if necessary.
G
Check brake fluid level in reservoir, and add recommended brake
G
fluid to specified level if necessary.
Check hydraulic system for leakage. Correct if necessary.
G
ROUTINE
5-1
PAGE
4-8, 5-4
5-4
5-4, 8-8
5-4, 8-23, 8-24, 8-25