Adjusting A Headlight Beam - Yamaha BLASTER YFS200W Owner's Manual

ECB00670
CAUTION:
Make sure the headlight bulb holder cover is
securely fitted over the bulb holder and seated
properly.
9. Place the headlight unit in the original posi-
tion, and then install the screws.
1
2
1. Headlight unit
2. Screw
10. Install the headlight beam adjusting screw,
the washer, the spring and the nut.
1
2
8-40
4
3
1. Headlight beam adjusting screw
2. Washer
3. Spring
4. Nut
11. Connect the main switch leads.
12. Install the panel by installing the screws.
13. Adjust the headlight beam.
EBU25550

Adjusting a headlight beam

ECB00690
CAUTION:
It is advisable to have a Yamaha dealer make
this adjustment.
1
2
2
1
3
4
5
6
7
8
9
10
11