Replacing A Rear Turn Signal Light Bulb; Replacing The License Plate Light - Yamaha CRYPTON T110C Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a rear turn signal
light bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
6
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
EAUS1611
1. Turn signal light bulb
1
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
Replacing the license plate
1
light bulb
1. Remove the license plate light cov-
1
2
1. License plate light cover
2. Screw
2. Remove the burnt-out bulb by pull-
[ECA11191]
1
1. License plate light bulb
6-31
er by removing the screw.
ing it out from the socket.
EAU47910