Periodic maintenance and adjustment
Front turn signal light
If a front turn signal light does not
come on, have a Yamaha dealer check
its electrical circuit or replace the bulb.
6
EAU39881
Replacing a rear turn signal
light bulb
1. Place the scooter on the center-
stand.
2. Open the seat. (See page 3-19.)
3. Remove the rear storage com-
partment by removing the bolts.
4. Remove the socket (together with
the turn signal light bulb) by turn-
ing it counterclockwise.
ZAUM1040
1. Storage compartment
2. Bolt
3. Rubber cap
5. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
ZAUM1038
1. Turn signal light bulb socket
6. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
6-32
2
1
1
EAUM3062
3