3. Insert a new bulb into the socket.
4. Install the license plate light cover
by installing the screw.
PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing an auxiliary light
bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb burns
out, replace it as follows.
1. Remove cowling A. (See page
6-7.)
2. Remove the auxiliary light bulb
socket (together with the bulb) by
pulling it out.
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by pull-
ing it out.
6-32
EAUW0343
1. Auxiliary light bulb
4. Insert a new bulb into the socket.
1
5. Install the auxiliary light bulb sock-
et (together with the bulb) by push-
ing it in.
6. Install the cowling.
1
6