D-Link DSL-7850U User Manual page 57

Basic Rate: Select the basic wireless rate used here.
Fragmentation Threshold: Enter the fragmentation threshold value used here.
RTS Threshold: Enter the RTS threshold value used here.
DTIM Interval: Enter the DTIM Interval value used here.
Beacon Interval: Enter the beacon interval value used here.
Global Max Clients: Enter the maximum global wireless client value used here.
XPress™ Technology: Select the XPress™ technology state here. Options to
choose from are Enabled and Disabled.
Regulatory Mode: Select the regulatory mode state here. Options to choose from
are Disabled, 802.11h, and 802.11d.
Pre-Network Radar Check: Enter the pre-network radar check value used here.
This option is only available after the 802.11h regulatory mode was selected.
In-Network Radar Check: Enter the in-network radar check value used here. This
option is only available after the 802.11h regulatory mode was selected.
TPC Mitigation (db): Select the TPC mitigation value used here. Options to choose from are 0 (off), 2, 3, and 4. This option is only available after the 802.11h regulatory
mode was selected.
WMM (Wi-Fi Multimedia): Select the WMM (Wi-Fi Multimedia) state here. Options
to choose from are Auto, Enabled and Disabled.
WMM No Acknowledgement: Select the WMM No Acknowledgement state here.
Options to choose from are Enabled and Disabled.
WMM APSD: Select the WMM APSD state here. Options to choose from are
Enabled and Disabled.
錯誤! 使用 錯誤 使用 [常用 常用] 索引標籤將 索引標籤將 Heading 1 套用到您想要在此處顯示的文字
錯誤 錯誤 使用 使用 常用 常用 索引標籤將 索引標籤將
D-Link DSL-7850U VDSL2 Router User Manual
套用到您想要在此處顯示的文字。 。 。 。
套用到您想要在此處顯示的文字 套用到您想要在此處顯示的文字 Page 57