D-Link DSL-7850U User Manual page 23

After clicking the Edit/Add button, the following page will be displayed. Here we can
configure the interface's parameters.
Parameters that can be configured are the following:
PPP Username: Enter the username provided by your ISP
PPP Password: Enter the password provided by your ISP
PPPoE Service Name: Enter the PPPoE service name provided by your ISP
Authentication Method: From the drop-down list select either AUTO, PAP, CHAP,
MSCHAP
Enable Fullcone NAT: Click the checkbox if you need this function
Dial on demand: Click the checkbox if you need this function
Use Static IPv4 Address: Click the checkbox if you need this function
Enable PPP Debug Mode: Click the checkbox if you need this function
Bridge PPPoE Frames Between WAN and Local Ports: Click the checkbox if you
need this function
Multicast Proxy: Click the checkbox if you need this function
Enable IGMP Multicast Proxy: Click the checkbox if you need this function
NAT: Click the checkbox if you need this function
Firewall: Click the checkbox if you need this function
Click the Back button to return to the previous page.
Click the Next button to continue to the next page.
After clicking the Next button, the following page will be displayed. Here we can view
a summary of the interface's parameters.
Click the Back button to return to the previous page.
Click the Apply/Save button to accept the changes.
錯誤 錯誤! 使用 使用 [常用 常用] 索引標籤將 索引標籤將 Heading 1 套用到您
錯誤 錯誤 使用 使用 常用 常用 索引標籤將 索引標籤將
D-Link DSL-7850U VDSL2 Router User Manual
套用到您想要在此處顯示的文字 想要在此處顯示的文字。 。 。 。
套用到您 套用到您 想要在此處顯示的文字 想要在此處顯示的文字 Page 23