RIP
Click the RIP button to access the RIP configuration page.
After clicking the RIP button the following page is available.
In this section we can configure the default gateway parameters for this router.
Version: Select the RIP version number here. Options to choose from are 1, 2, and
Both.
Operation: Select the operation mode here. Options to choose from are Active and
Passive.
Enable: Tick this option to enable the RIP configuration on the specified interface.
Click the Apply/Save button to accept the changes made.
錯誤! 使用
錯誤
使用 [常用
常用] 索引標籤將
索引標籤將 Heading 1 套用到您想要在此處顯示的文字
錯誤
錯誤
使用
使用
常用
常用
索引標籤將
索引標籤將
D-Link DSL-7850U VDSL2 Router User Manual
套用到您想要在此處顯示的文字。 。 。 。
套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字
Page 113