After clicking the Configure System Log button, the following page is available.
In this section we can configure the System Log parameters for this router.
Log: Select the log state here. Options to choose from are Disable and Enable.
Log Level: Select the log level option here. Options to choose from are
Emergency, Alert, Critical, Error, Warning, Notice, Information, and
Debugging.
Display Level: Select the display level option here. Options to choose from are
Emergency, Alert, Critical, Error, Warning, Notice, Information, and
Debugging.
Mode: Select the mode option here. Options to choose from are Local, Remote,
and Both.
Click the Apply/Save button to accept the changes made.
Click the Cancel button to discard the changes made and return to the main page.
錯誤
錯誤! 使用
使用 [常用
常用] 索引標籤將
索引標籤將 Heading 1 套用到您想要在此處顯示的文字
錯誤
錯誤
使用
使用
常用
常用
索引標籤將
索引標籤將
D-Link DSL-7850U VDSL2 Router User Manual
套用到您想要在此處顯示的文字。 。 。 。
套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字
Page 136