Replacing Fuse - Yamaha 13.5A Owner's Manual

4) Reinstall the filter element in the cup.
Make sure the O-ring is in position in
the cup. Firmly screw the cup onto
the filter housing 4.
5) Attach the filter assembly to the
bracket so that the fuel hoses are
attached to the filter assembly.
6) Run the engine and check the filter
and lines for leaks.
EMU01329

REPLACING FUSE

If the fuse has blown on an Electric start
model, open the fuse holder and replace
the fuse with a new one of proper amper-
age.
q
w
Be sure to use the specified fuse. An
*
205012
incorrect fuse or a piece of wire may
allow excessive current flow. This could
cause electrical system damage and a fire
hazard.
NOTE:
If the new fuse blows again immediately,
consult a Yamaha dealer.
w
1 Fuse holder
2 Fuse (20A)
205013*
4-14
GB