Inspecting And Replacing Anode(S) - Yamaha 13.5A Owner's Manual

5) With the outboard motor in a vertical
position, and using a flexible or pres-
surized filling device, inject the gear
oil into the gear oil drain screw hole.
Gear oil grade and capacity:
See "Specifications" in this chapter.
6) When the oil begins to flow out of the
601022
oil level plug hole, insert and tighten
the oil level plug.
7) Insert and tighten the gear oil drain
screw.
EMU14622
INSPECTING AND REPLACING
ANODE(S)
Yamaha outboard motors are protected
from corrosion by sacrificial anodes.
Inspect the external anodes periodically.
Remove scales from the surfaces of the
anodes. Consult a Yamaha dealer for
replacement of external anodes.
cC
Do not paint anodes, as this would ren-
der them ineffective.
NOTE:
Inspect ground leads attached to external
anodes on equipped models. Consult a
Yamaha
replacement of internal anodes attached
to the power unit.
604011
4-21
dealer for inspection
GB
and