Helmet Holder; Adjusting The Shock Absorber Assembly - Yamaha STAR XVS950 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Helmet holder

1
2
1
3
4
1. Helmet holder
The helmet holder is located under the
5
rider seat.
6
To secure a helmet to the helmet
holder
7 1. Remove the rider seat. (See
page 3-13.)
2. Attach the helmet to the helmet
8
holder, and then securely install
the seat. WARNING! Never ride
9
with a helmet attached to the
helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an acci-
dent.
[EWA10161]
EAU14321 To release the helmet from the hel-
met holder
Remove the rider seat, remove the hel-
met from the helmet holder, and then
install the seat.
Adjusting the shock absorber
assembly
1. Spring preload adjusting ring
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring, allowing the spring preload to
be adjusted to suit the rider's prefer-
ence.
It is recommended to have a Yamaha
dealer adjust the spring preload.
3-14
1
G
Should you choose to make the
adjustment, use the
wrench included in the additional
tool kit, which was handed out sep-
arately at the purchase of the vehi-
cle.
EAU47160
special