Table of Contents
Advertisement
3.1
Using the web interface to configure the system
The DVX-1000 web interface can be accessed from any web browser supporting
frames and java script. Internet explorer (Version 4.0 and above) is the preferred
browser. The web interface can be accessed using the URL http://IPADDRESS ,
where IPADDRESS is the address assigned to the DVX-1000 board. The system
configuration page can be accessed by clicking the system configuration link from
the DVX-1000 web interface.
3.1.1
DVX WEB Requirements
The following browsers have been tested to be fully compatible with the DVX-
1000 web interface:
Internet Explorer (Version 5.5 and above)
o
Netscape (Version 7.0 and above)
o
Mozilla ( Version 5.0 and above)
o
Galeon (Version 7.0 and above).
o
3.1.2
Configuring the IP
IP configuration for the DVX-1000 board can be static or through DHCP. The
default factory setting for IP is 10.0.0.1. To bring the board up for the first time;
configure an IP for the board from the CLI interface. Subsequently, all
configurations can be done through the web interface by accessing the board's
.
configured IP
3.1.2.1
Configuring the IP address automatically using DHCP
DVX-1000 can be configured to get it's IP through Dynamic Host Configuration
Protocol (DHCP). To enable this, select DHCP and click on Apply. Please note
that on some browsers, redirection to the new IP is not possible. In this
case, the new IP has to be ascertained from the CLI interface and the
corresponding web page should be accessed.
3.1.2.2
Configuring the IP address manually.
Assigning a static IP for the DVX-1000 is the recommended method for IP
configuration as it is advisable to have the call server work on a fixed IP address.
To configure a static IP for DVX-1000, click on the system configuration link.
Now, under IP configuration, select static and enter a static IP, subnet mask and
gateway. Click 'Apply'. Please note that on some browsers, redirection to
the new IP is not possible. In this case simply access the new static IP that
you have now configured for the board from the web.
Note: If you configure the IPPBX for DHCP and you do not have a DHCP server that has a
DHCP clients list you may not be able to find the IP address of the device. It is
recommended to use a static IP address on the IPPBX so you will always know the address
of the unit.
3.1.3
Configuring the DNS server address.
DVX-1000 has a Domain Name Service (DNS) client built in that will resolve
hostnames accessing the DNS server that is configured. To set the DNS server
that is relevant to your network, access the system configuration page; modify
the primary and secondary DNS servers and click apply.
3.1.4
Setting the system time.
DVX-1000 can either be configured to get its time through manual configuration
or through Network Time Protocol (NTP). It ships with a factory default setting of
D-Link Confidential
DVX-1000 User Manual
9
Advertisement
Table of Contents
