Table of Contents
Advertisement
3.2.10 Set NTP Server Command:
Command Name:
Command description:
Command Format:
Warning: On executing the following NTP server commands the system will assume that the
time configuration should be obtained from the NTP server and the time configuration will
be set to 'NTP server' if it is in manual mode currently. If you do not want this to happen,
please undo the change through the web page.
3.2.11 Set Primary NTP Server Command:
Command Name:
Command description:
Command Format:
3.2.12 Set Secondary NTP Server Command:
Command Name:
Command description:
Command Format:
Warning: Using the following commands to configure the system time will result in the time
configuration mode being set to manual. If you do not want this to happen, please undo the
change through the web page.
3.2.13 Set Zone Command:
Command Name:
Command description:
Command Format:
D-Link Confidential
set ntpserver
The 'set ntpserver' command configures the
primary & secondary NTP server address. It
will automatically sync the time with the NTP
server.
set ntpserver <primary ntp server
domain/ipaddress> <secondary ntp server
domain/ipaddress (optional)>
e.g. set ntpserver 192.168.10.9 pool.ntp.org
set primaryntpserver
The
'set
primaryntpserver'
configures the primary NTP server address. It
will automatically sync the time with the NTP
server.
set primaryntpserver <domain/ipaddress>
e.g. set primaryntpserver pool.ntp.org
set secondaryntpserver
The
'set
secondaryntpserver'
configures the secondary NTP server address.
It will automatically sync the time with the
NTP server if not already sync with the
primary NTP server.
set secondaryntpserver <domain/ipaddress>
e.g. set secondaryntpserver 192.168.10.10
set zone
The 'set zone' command sets the system time
zone. Use 'set zone ?' to get zone numbers.
set zone <zone number>
13
DVX-1000 User Manual
command
command
Advertisement
Table of Contents
