Table of Contents
Advertisement
11.1
Upgrading from a Windows machine
•
Extract the file to a directory say c:\DVX_v.1.0.0
•
Access the web interface of DVX-1000 and login as the administrator user
•
Click on software upgrade
•
A new window will pop up asking you to enter the script file name
•
Here browse and choose the script upgrade.sh from the c:\DVX_v.1.0.0
directory and click upgrade
•
If the script was accepted correctly you will now see a prompt with a
request for the various modules to be upgraded one by one
•
.All these binaries will be in the c:\DVX_v1.0.0 directory where you
extracted the upgrade package.
•
Specify this path and click on upgrade.
•
When upgrade for that particular module is successfully complete, It will
prompt for the next module.
•
Follow the same procedure as given above for the rest of the modules
•
Once all the modules have been upgraded you will now see the upgrade
status of all the modules.
11.2
Upgrading from a Linux machine
The procedure in this case is similar except that instead of extracting it to
c:\DVX_1.0.0 the directory would now be /root/tmp/DVX_1.0.0.The rest of the
process is similar to the windows procedure
11.3
Viewing Upgrade History
It is possible to view the upgrade history of the DVX-1000 from its web interface.
When the link History is clicked from the home page of the DVX-1000 web
interface, a pop up window appears. This page contains details regarding what
upgrades have been made on the board, whether these upgrades succeeded, who
performed these upgrades, the time of upgrade and so on. These details can help
to
ascertain
the
patches
troubleshooting.
12 Installing an SSL certificate
The administrator can upload an SSL certificate to be used for site validation. The
web page for certificate upload can be accessed by clicking on the SSL-certificate
link in the main menu tree. Select the certificate and the Key provided by the
verification agency and click upload. The certificate and key will be installed
automatically and will come into effect after the system is restarted.
Please note that until the next restart the old certificate will remain effective. If
for any reason you wish to revert back to the default SSL certificate that was
supplied with the NTE, you can use the CLI to do so. Please refer to the relevant
section in Configuring the system through the Command Line Interface
13 Setting Quality of Service for real time traffic
The Quality of Service (QoS) for the real time traffic originating from the DVX-
1000 can be configured. The configuration pages of the Auto attendant, Voicemail
and the conference server, each have a separate configuration for the QoS. The
parameters that can be configured are explained below.
Can be one of Routine, Priority, Immediate, Flash, Flash-override or
CRITIC/ECP in increasing order of priority with CRITIC/ECP being the highest.
Precedence
'Inter network control' and 'Network control' are currently unused on the
network and are reserved for future use
Type of Service
Select one or more of 'Minimize delay', 'Maximize throughput', 'Maximize
D-Link Confidential
applied
to
the
system,
36
DVX-1000 User Manual
thereby
helping
in
Advertisement
Table of Contents
