Lcd And Operation Panel; Using The Function Buttons - Canon MX720 Series Online Manual

LCD and Operation Panel

You can use the machine to make copies, send/receive faxes, scan originals, or print photos on a USB
flash drive without a computer.
You can also make good use of the various functions of the machine using the menu screen and the
settings screen on the LCD.
The copy, scan, or fax mode can be selected.
The desired mode can be selected by pressing the mode button (A) on the operation panel.
On each mode screen, the various functions can be selected or the setting can be changed, with the
Function buttons (B) or the , , , and buttons (C).
Pressing the MENU button (D) displays the menu which provides access to photo print or various copy
functions. With this menu, you can perform machine maintenance and change machine settings.
On the menu screen or settings screen, use the , , , and button to select an item or option, then
press the OK button (E) to proceed with the procedure.
To return to the previous screen, press the Back button (F).
The lamp on the selected mode button or MENU button will light up.

Using the Function Buttons

Function menus (G) will appear where required at the bottom of the screen. Pressing a corresponding
Function button (H), (I), or (J) displays its function, such as a settings screen.
The number of function menus and their contents vary depending on the screen. Check the function menus
displayed at the bottom of the screen, then select the one desired.
Example: Fax standby screen
(H) Press the left Function button to select Function list. The fax menu screen will appear.