Handlebar Switches - Yamaha BIG BEAR YFM400FPR Owner's Manual

1. Lights switch " / /OFF"
2. Engine stop switch "
3. Start switch " "
4. Horn switch " "
1. Contacteur d'éclairage "
2. Coupe-circuit du moteur "
3. Contacteur du démarreur "
4. Contacteur de l'avertisseur "
1. Interruptor de luces "
2. Interruptor de paro del motor "
3. Interruptor de arranque "
4. Interruptor de la bocina "
"/" "
/ /OFF"
"/" "
"
"
/ /OFF"
"/" "
"
"

Handlebar switches

Engine stop switch "
Make sure that the engine stop switch is in the
" " position. The engine stop switch controls ig-
nition and can be used at all times to stop the en-
gine, especially in an emergency. The engine will
not start or run when the engine stop switch is
turned to " ".
Start switch "
The starter motor cranks the engine when this
switch is pushed.
CAUTION:
See starting instructions prior to starting the
engine on page 6-3.
4-13
"/" "
"
EBU00053
EBU00849
EBU00607