1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Offroad Vehicle
  5. KODIAK ULTRAMATIC YFM400FWAN 2000
  6. Owner's manual

Yamaha KODIAK ULTRAMATIC YFM400FWAN 2000 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
READ THIS MANUAL CAREFULLY!
It contains important safety information.
OWNER'S MANUAL
YFM400FWAN(C)
WARNING
This ATV should not be ridden by anyone under 16 years of age.
LIT-11626-14-05
5GH-28199-11

Advertisement

Table of Contents
loading

Related Manuals for Yamaha KODIAK ULTRAMATIC YFM400FWAN 2000

Summary of Contents for Yamaha KODIAK ULTRAMATIC YFM400FWAN 2000

  • Page 1 READ THIS MANUAL CAREFULLY! It contains important safety information. OWNER’S MANUAL YFM400FWAN(C) WARNING This ATV should not be ridden by anyone under 16 years of age. LIT-11626-14-05 5GH-28199-11...
  • Page 3 Yamaha experience in the production of fine sporting, touring, and pace-set- ting racing machines. With the purchase of this Yamaha, you can now appreciate the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields.

  • Page 4: Warning

    EBU00010 IMPORTANT MANUAL INFORMATION FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS MANUAL CAN RESULT IN SERIOUS INJURY OR DEATH. Particularly important information is distinguished in this manual by the following nota- tions: The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Failure to follow WARNING instructions could result in severe injury WARNING...
  • Page 5 Please check your local riding laws and regulations before operating this machine. EBU00711 YFM400FWAN(C) OWNER’S MANUAL AFFIX DEALER © 2000 by Yamaha Motor Corporation, U.S.A. LABEL HERE 1st Edition, March 2000 All rights reserved. Any reprinting or unauthorized use without the written...

  • Page 6: Table Of Contents

    EBU00014 CONTROL FUNCTIONS....4-1 WARNING Main switch........4-1 Indicates a potential hazard that could re- Indicator lights........4-2 sult in serious injury or death. Coolant temperature warning light checking method....4-4 Fuel gauge ........4-5 CONTENTS Handlebar switches .......4-6 Throttle lever ........4-9 Speed limiter ........4-10 LOCATION OF THE WARNING Front brake lever ......4-11 AND SPECIFICATION LABELS ..1-1...
  • Page 7 Rear shock absorber Drive select lever operation adjustment ........4-20 and reverse driving ......6-4 Auxiliary DC jack......4-21 Engine break-in ......6-7 Parking ..........6-8 PRE-OPERATION CHECKS ..... 5-1 Parking on a slope ......6-9 Front and rear brakes ....5-2 Accessories and loading .....6-10 Fuel..........
  • Page 8 PERIODIC MAINTENANCE AND Rear brake pad inspection...8-37 ADJUSTMENT .........8-1 Inspecting the brake fluid Owner’s manual and tool kit ..8-1 level ..........8-37 Periodic maintenance/ Brake fluid replacement ....8-39 lubrication ........8-3 Front brake adjustment ....8-39 Panel removal and Rear brake lever adjustment..8-41 installation........8-5 Rear brake pedal height Engine oil........8-12...
  • Page 9 CLEANING AND STORAGE.... 9-1 A. Cleaning ........9-1 B. Storage ........9-3 SPECIFICATIONS......10-1 NOISE REGULATION ....11-1 MAINTENANCE RECORD ..... 12-1 ATV LIMITED WARRANTY ... 13-1 YAMAHA EXTENDED SERVICE (Y.E.S.) ..........14-1...

  • Page 10: Location Of The Warning And Specification Labels

    EBU00464 LOCATION OF THE WARNING AND SPECIFICATION LABELS...
  • Page 11 ATV. Never remove any labels from your ATV. If a label becomes difficult to read or comes off, a replacement label is available from your Yamaha dealer. LOAD LIMIT 40 kg (88 lbs) 4GB-24877-A0 WARNING NEVER sit here.
  • Page 12 LOAD LIMIT 80 kg (176 lbs) 4SH-24877-A0 WARNING UNDER Operating this ATV if you are under the age of 16 increases your chance of severe injury or death. NEVER operate this ATV if you are under age 16. 5FE-21697-01...

  • Page 14: Safety Information

    EBU00017 SAFETY INFORMATION AN ATV IS NOT A TOY AND CAN BE HAZARDOUS TO OPERATE. An ATV handles differ- ently from other vehicles including motorcycles and cars. A collision or rollover can occur quickly, even during routine maneuvers such as turning and riding on hills or over obsta- cles, if you fail to take proper precautions.
  • Page 15 Never operate an ATV without wearing an approved motorcycle helmet that fits proper- ly. You should also wear eye protection (goggles or face shield), gloves, boots, long- sleeved shirt or jacket, and long pants. Never consume alcohol or drugs before or while operating this ATV. Never operate at speeds too fast for your skills or the conditions.
  • Page 16 Always follow proper procedures for climbing hills as described in this manual. Check the terrain carefully before you start up any hill. Never climb hills with excessively slip- pery or loose surfaces. Shift your weight forward. Never open the throttle suddenly or make sudden gear changes.
  • Page 17 Always be careful when skidding or sliding. Learn to safely control skidding or sliding by practicing at low speeds and on level, smooth terrain. On extremely slippery surfaces, such as ice, go slowly and be very cautious in order to reduce the chance of skidding or sliding out of control.
  • Page 18 WARNING When transporting the machine in an- other vehicle, be sure it is kept upright POTENTIAL HAZARD and that the fuel cock is in the “OFF” po- Improper handling of gasoline. sition. Otherwise, fuel may leak out of WHAT CAN HAPPEN the carburetor or fuel tank.
  • Page 19 WARNING POTENTIAL HAZARD Starting or running the engine in a closed area. WHAT CAN HAPPEN Exhaust fumes are poisonous and may cause loss of consciousness and death within a short time. HOW TO AVOID THE HAZARD Always operate your machine in an area with adequate ventilation.

  • Page 20: Description And Machine Identification

    EBU00032 DESCRIPTION AND MACHINE IDENTIFICATION 1. Rear spring preload 13. Fuses adjusting ring 14. V-belt cooling duct check hose 2. Spark arrester 15. Coolant reservoir 3. Storage compartment 16. Oil filter cartridge and tool kit 17. Engine oil dipstick 4. Spark plug 18.

  • Page 21: Identification Number Records

    This number can be used for order- sistance when ordering spare parts from a ing a new key. Yamaha dealer or for reference in case the vehicle is stolen. 1. KEY IDENTIFICATION NUMBER: 2. VEHICLE IDENTIFICATION NUMBER: 1.

  • Page 22: Vehicle Identification Number

    Record the information on this label in the space provided. This information will be needed to order spare parts from your Yamaha dealer. 1. Vehicle identification number NOTE: The vehicle identification number is used 1. Model label...

  • Page 23: Control Functions

    EBU00039 CONTROL FUNCTIONS WARNING Indicates a potential hazard that could re- sult in serious injury or death. EBU00041 Main switch Functions of the respective switch posi- tions are as follows: 1. Main switch Engine can be started only at this position and the headlight and taillight come on when the light switch is on.

  • Page 24: Indicator Lights

    EBU00043 EBU00602 Indicator lights Reverse indicator light “R” This indicator light comes on when the transmission is in reverse. EBU00603 Neutral indicator light “N” This indicator light comes on when the transmission is in neutral. 1. Park indicator light “P” 2.
  • Page 25 EBU00713 EBU00605 Coolant temperature warning light “ ” Four-wheel-drive indicator light “ ” When the coolant temperature reaches a This indicator light comes on when the specified level, this light comes on to warn 2WD/4WD switch is in the 4WD position. that the coolant temperature is too hot.

  • Page 26: Coolant Temperature Warning Light Checking Method

    Coolant temperature Coolant temperature warning light comes warning light does on momentarily. not come on. Coolant temperature and electrical circuit are OK. Ask a Yamaha dealer to Go ahead with riding. inspect the electrical circuit.

  • Page 27: Fuel Gauge

    EBU00052 Fuel gauge The fuel gauge indicates the amount of fuel in the fuel tank. When the needle reaches the red line, refill the tank at the first opportunity. 1. Fuel gauge 2. Red line 5.5 L (1.21 Imp gal, 1.45 US gal) NOTE: If the machine runs out of fuel, move the fuel cock lever to the “RES”...

  • Page 28: Handlebar Switches

    EBU00053 Handlebar switches CAUTION: Do not use the headlight with the engine turned off for more than thirty minutes. The battery may discharge to the point that the starter motor will not operate properly. If this should happen, remove the battery and recharge it. EBU00606 Engine stop switch 1.
  • Page 29 EBU00607 Start switch “ ” The starter motor cranks the engine when this switch is pushed. CAUTION: See starting instructions prior to starting the engine. (See page 6-1 for details.)
  • Page 30 WARNING POTENTIAL HAZARD Changing from 2WD to 4WD or from 4WD to 2WD while the ATV is moving. WHAT CAN HAPPEN The ATV handles differently in 2WD than in 4WD in some circumstances. Changing from 2WD to 4WD or from 4WD to 2WD while moving may cause 1.

  • Page 31: Throttle Lever

    Check the operation of the throttle lever before you start the engine. If it does not work smoothly, check for the cause. Correct the problem before riding the ATV. Consult a Yamaha dealer if you can’t find or solve the problem yourself. 1. Throttle lever...

  • Page 32: Speed Limiter

    EBU00066 Speed limiter WARNING The speed limiter keeps the throttle from POTENTIAL HAZARD fully opening, even when the throttle lever Improper adjustment of the speed limit- is pushed to the maximum. Screwing in er and throttle. the adjuster limits the maximum engine WHAT CAN HAPPEN power available and decreases the maxi- The throttle cable could be damaged.

  • Page 33: Front Brake Lever

    EBU00070 Front brake lever The front brake lever is located on the right handlebar. Pull it toward the handlebar to apply the front brake. 1. Rear brake pedal 1. Front brake lever EBU00073 Rear brake pedal and lever The brake pedal is located on the right side of the machine and the brake lever is locat- ed on the left handlebar.

  • Page 34: Drive Select Lever

    EBU00608 EBU00666 Drive select lever Recoil starter The drive select lever is used to shift your Firmly grasp the handle and pull slightly machine into the low, high, neutral, re- until engagement can be felt. Then pull verse and park positions. (Refer to page forcefully, being careful not to pull the rope 6-4 for the drive select lever operation.) all the way out.

  • Page 35: Fuel Tank Cap

    EBU00092 Fuel tank cap WARNING Remove the fuel tank cap by turning it POTENTIAL HAZARD counterclockwise. Starting the engine in gear or starting the engine without shifting into the park position. WHAT CAN HAPPEN The ATV could start to move unexpect- edly, which could cause an accident.

  • Page 36: Fuel Cock

    EBU00093 Fuel cock OFF Position The fuel cock supplies fuel from the fuel tank to the carburetor. The fuel cock has three positions. OFF: With the lever in this position fuel will not flow. Always turn the lever to this position when the engine is not running.

  • Page 37: Starter (Choke)

    EBU00095 Starter (choke) “ ” RES Position Starting a cold engine requires a richer air- fuel mixture. A separate starter circuit sup- plies this mixture. Move in direction a to turn on the starter (choke). Move in direction b to turn off the starter (choke).

  • Page 38: Seat

    EBU00566 Seat To install the seat, insert the projection on To remove the seat, pull the seat lock lever the front of the seat into the seat holder upward and pull up the seat at the rear. and push down on the seat at the rear. NOTE: Make sure that the seat is securely fitted.

  • Page 39: Storage Box

    EBU00581 EBU00582 Storage box Front carrier Maximum load limit: 2 kg (4.4 lb) Maximum load limit: 40 kg (88 lb) CAUTION: EBU00583 To protect from damage, do not put metal Rear carrier products, like tools or sharply edged prod- Maximum load limit: 80 kg (176 lb) ucts directly in the storage box.

  • Page 40: Front Shock Absorber Adjustment

    EBU00635 Front shock absorber adjustment Standard position: 2 The spring preload can be adjusted to suit 1 - Minimum (Soft) the rider’s weight and riding conditions. 5 - Maximum (Hard) Adjust the spring preload as follows: To increase the spring preload, turn the ad- juster in direction a.
  • Page 41 WARNING POTENTIAL HAZARD Improper shock absorber adjustment. WHAT CAN HAPPEN Uneven adjustment can cause poor han- dling and loss of stability, which could lead to an accident. HOW TO AVOID THE HAZARD Always adjust the shock absorbers on the left and right side to the same set- ting.

  • Page 42: Rear Shock Absorber Adjustment

    NOTE: To decrease the spring preload, turn the A special wrench can be obtained at a adjuster in direction b. Yamaha dealer. 1. Spring preload adjuster 1. Special wrench a. Increase spring preload b. Decrease spring preload...

  • Page 43: Auxiliary Dc Jack

    EBU00748 Auxiliary DC jack Maximum rated capacity for the The auxiliary DC jack is located at the front auxiliary DC jack: right side of the ATV. The auxiliary DC jack DC 12 V, 120 W (10 A) can be used for suitable work lights, radi- os, etc.
  • Page 44 1. Auxiliary DC jack EBU00112 WARNING Indicates a potential hazard that could re- sult in serious injury or death. 4-22...

  • Page 45: Pre-Operation Checks

    PRE-OPERATION CHECKS Before using this machine, check the following points: ITEM ROUTINE PAGE • Check operation, free play, fluid level and fluid leakage. 5-2 ~ 5-3, Brakes • Fill with DOT 4 brake fluid if necessary. 8-36 ~ 8-44 • Check fuel level. Fuel 5-4 ~ 5-5 •...

  • Page 46: Front And Rear Brakes

    HOW TO AVOID THE HAZARD brakes are applied. If not, have the ma- Always inspect your ATV each time you chine inspected by a Yamaha dealer. use it to make sure the ATV is in safe op- 2. Brake fluid level erating condition.
  • Page 47 Riding with improperly operating minute. If there is any leaking, have brakes. the machine inspected by a Yamaha WHAT CAN HAPPEN dealer. You could lose braking ability, which 4. Brake operation could lead to an accident. Test the brakes at slow speed after...

  • Page 48: Fuel

    Reserve: formance problems. 4.5 L (0.99 Imp gal, 1.19 US gal) Your Yamaha engine has been designed to use regular unleaded gasoline with a pump octane number ([R+M]/2) of 86 or higher, or research octane number of 91 or higher.
  • Page 49 WARNING POTENTIAL HAZARD Improper care when refueling. WHAT CAN HAPPEN Fuel can spill, which can cause a fire and severe injury. Fuel expands when it heats up. If the fuel tank is overfilled, fuel could spill out due to heat from the engine or the sun. HOW TO AVOID THE HAZARD Do not overfill the fuel tank.

  • Page 50: Engine Oil

    EBU00484 Engine oil CAUTION: Make sure the engine oil is at the specified Be sure to use motor oils that do not level. Add oil as necessary. (See page contain anti-friction modifiers. Pas- 8-12.) senger car motor oils (often labeled “Energy Conserving”) contain anti- Recommended oil: friction additives which will cause...

  • Page 51: Final Gear Oil

    EBU00493 EBU00678 Final gear oil Differential gear oil Make sure the final gear oil is at the speci- Make sure the differential gear oil is at the fied level. Add oil as necessary. (See pages specified level. Add oil as necessary. (See 8-15 ~ 8-17 for details.) pages 8-18 ~ 8-19 for details.) Recommended oil:...

  • Page 52: Fittings And Fasteners

    Always check the tightness of chassis fit- WARNING tings and fasteners before a ride. Take the POTENTIAL HAZARD machine to a Yamaha dealer or refer to the Operating this ATV with improper tires, Service Manual for correct tightening or with improper or uneven tire pres- torque.
  • Page 53 2. The tires should be set to the rec- 4. Use no more than the following ommended pressure: pressures when seating the tire Recommended tire pressure beads. Front 25 kPa (0.25 kgf/cm , 3.6 psi) Front 250 kPa (2.5 kgf/cm , 36 psi) Rear 25 kPa (0.25 kgf/cm , 3.6 psi)

  • Page 54: How To Measure Tire Pressure

    EBU00159 How to measure tire pressure Use the low-pressure tire gauge. NOTE: The low-pressure tire gauge is included as standard equipment. Make two measure- ments of the tire pressure and use the sec- ond reading. Dust or dirt in the gauge could cause the first reading to be incor- rect.

  • Page 55: Tire Wear Limit

    EBU00160 Tire wear limit When the tire groove decreases to 3 mm (0.12 in) due to wear, replace the tire. a. 3 mm (0.12 in) 5-11...

  • Page 56: Operation

    2. Turn the fuel cock to “ON”. there is a control or function you do not 3. Turn the main switch to “ON” and the understand, ask your Yamaha dealer. engine stop switch to “ ”. 4. Shift the drive select lever into the...
  • Page 57 Yamaha dealer to inspect its electric circuit. The engine can be started in any gear if the rear brake lever is applied. How-...

  • Page 58: Starting A Warm Engine

    NOTE: CAUTION: If the engine fails to start, release the See the “Engine break-in” section prior to start switch, then push the start switch operating the engine for the first time. again. Pause a few seconds before the next attempt. Each cranking should be as short as possible to preserve bat- EBU00180 tery energy.

  • Page 59: Drive Select Lever Operation And Reverse Driving

    EBU00674 Drive select lever operation and reverse driving CAUTION: Before shifting, you must stop the ma- chine and return the throttle lever to the closed position. Otherwise, the transmis- sion may be damaged. 1. Shifting: Neutral to High and High to 1.
  • Page 60 If the light does not ing the drive select lever along the come on, ask a Yamaha dealer to in- shift guide. spect the reverse indicator light elec- trical circuit.
  • Page 61 e. Open the throttle lever gradually and continue to watch to the rear while backing. WARNING POTENTIAL HAZARD Improperly operating in reverse. WHAT CAN HAPPEN You could hit an obstacle or person be- hind you, resulting in serious injury. HOW TO AVOID THE HAZARD When you shift into reverse, make sure there are no obstacles or people behind you.

  • Page 62: Engine Break-In

    Because the mality is noticed during this period, con- engine is brand new, you must not put an sult a Yamaha dealer. excessive load on it for the first several 1. 0 ~ 10 hours: hours of running. During the first 20 hours,...

  • Page 63: Parking

    EBU00612 2. 10 ~ 20 hours: Parking Avoid prolonged operation above 3/4 When parking, stop the engine and shift throttle. Rev the machine freely but do the drive select lever into the park position, not use full throttle at any time. then turn the fuel cock to the “OFF”...

  • Page 64: Parking On A Slope

    EBU00615 Parking on a slope 1. Bring the machine to a stop by apply- ing the brakes. WARNING 2. Stop the engine. POTENTIAL HAZARD 3. With the rear brake applied, shift the Parking on a hill or other incline. drive select lever to the park position. WHAT CAN HAPPEN The ATV could roll out of control, in- creasing the chance of an accident.

  • Page 65: Accessories And Loading

    ATV. Examples include (but are Choose only accessories designed for not limited to) a heavy or bulky object at- your ATV. Your Yamaha dealer has a va- tached to the handlebars which could riety of genuine Yamaha accessories.
  • Page 66 EBU00231 Loading Do not exceed the maximum tongue Cargo or a trailer can change the stability weight. You can measure tongue weight and handling of an ATV. You must use with a bathroom scale. Put the tongue of common sense and good judgment when the loaded trailer on the scale with the carrying cargo or towing a trailer.
  • Page 67 Ride more slowly than you would with- WARNING out a load. The more weight you carry, POTENTIAL HAZARD the slower you should go. Although con- Overloading this ATV or carrying or ditions vary, it is good practice not to ex- towing cargo improperly.
  • Page 68 EBU00723 WARNING Indicates a potential hazard that could re- sult in serious injury or death. 6-13...

  • Page 69: Riding Your Atv

    Riding Your ATV Riding Your...

  • Page 71: Getting To Know Your Atv

    WARNING Indicates a potential hazard that could re- sult in serious injury or death. GETTING TO KNOW YOUR ATV achieve the skill necessary to enjoy riding This ATV is for recreation and utility use. safely. Before you begin to ride, be sure This section, Riding your ATV, provides you have read this Owner’s Manual com- general ATV riding instructions for recre-...

  • Page 72: Ride With Care And Good Judgement

    JUDGEMENT Beginning and inexperienced operators should complete the certified training Get training if you are inexperienced. course offered by Yamaha. They should Beginners should get training from a certi- then regularly practice the skills learned fied instructor. in the course and the operating tech- Become familiar with this ATV at slow niques described in this Owner’s Manu-...
  • Page 73 Not recommended for children under 16 years of age. WARNING POTENTIAL HAZARD Failure to follow the age recommenda- tions for this ATV. WHAT CAN HAPPEN Use by children of ATVs that are not rec- ommended for their age can lead to se- vere injury or death of the child.
  • Page 74 This machine is designed to carry operator and cargo only - passengers prohibited. WARNING POTENTIAL HAZARD Carrying a passenger on this ATV. WHAT CAN HAPPEN Greatly reduces your ability to balance and control this ATV. Could cause an ac- cident, resulting in harm to you and/or your passenger.
  • Page 75 Apparel Operating without protective clothing WARNING increases your chances of severe injury in the event of an accident. POTENTIAL HAZARD HOW TO AVOID THE HAZARD Operating this ATV without wearing an Always wear an approved motorcycle approved motorcycle helmet, eye pro- helmet that fits properly.
  • Page 76 Do not operate after consuming alcohol or WARNING drugs. POTENTIAL HAZARD Operator’s performance capability is re- Operating this ATV after consuming al- duced by the influence of alcohol or drugs. cohol or drugs. WHAT CAN HAPPEN Could seriously affect your judgment. Could cause you to react more slowly.
  • Page 77 Pre-operation checks WARNING Always perform the pre-operation checks POTENTIAL HAZARD listed on page 5-1 before riding for safety Operating this ATV with improper tires, and proper care of the machine. or with improper or uneven tire pres- WARNING sure. POTENTIAL HAZARD WHAT CAN HAPPEN Failure to inspect the ATV before oper- Use of improper tires on this ATV, or op-...
  • Page 78 Speed limiter WARNING For riders less experienced with this mod- Indicates a potential hazard that could re- el, this model is equipped with a speed lim- sult in serious injury or death. iter in the throttle lever housing. The speed limiter keeps the throttle from fully open- Do not operate at speeds too fast for your ing, even when the throttle lever is pushed...
  • Page 79 Loading and accessories WARNING Use extra caution when riding the machine POTENTIAL HAZARD with additional loads, such as accessories Overloading this ATV or carrying or or cargo. The machine’s handling may be towing cargo improperly. adversely affected. Reduce your speed WHAT CAN HAPPEN when adding additional loads.
  • Page 80 During operation WARNING Always keep your feet on the footboards POTENTIAL HAZARD during operation. Otherwise your feet may Removing hands from handlebars or contact the rear wheels. feet from footboards during operation. WHAT CAN HAPPEN Removing even one hand or foot can re- duce your ability to control the ATV or could cause you to lose your balance and fall off of the ATV.
  • Page 81 Avoid wheelies and jumping. You may lose control of the machine or overturn. WARNING POTENTIAL HAZARD Attempting wheelies, jumps, and other stunts. WHAT CAN HAPPEN Increases the chance of an accident, in- cluding an overturn. HOW TO AVOID THE HAZARD Never attempt stunts, such as wheelies or jumps.
  • Page 82 Never modify this ATV through improp- er installation or use of accessories. All parts and accessories added to this ve- hicle should be genuine Yamaha or equivalent components designed for use on this ATV and should be installed and used according to instructions. If you have questions, consult an autho- rized ATV dealer.
  • Page 83 Exhaust system The exhaust system on the machine is very hot during and following operation. To prevent burns, avoid touching the exhaust system. Park the machine in a place where pedestrians or children are not likely to touch it. WARNING POTENTIAL HAZARD Hot exhaust system.

  • Page 84: Be Careful Where You Ride

    BE CAREFUL WHERE YOU RIDE This machine is designed for off-road use only. Riding on paved surfaces can cause loss of control. WARNING POTENTIAL HAZARD Operating this ATV on paved surfaces. WHAT CAN HAPPEN ATVs are designed for off-road use only. Paved surfaces may seriously affect handling and control of the ATV, and may cause the vehicle to go out of con-...
  • Page 85 Do not ride on any public road, street, or highway. Riding on public roads can result in colli- sions with other vehicles. WARNING POTENTIAL HAZARD Operating this ATV on public streets, roads or highways. WHAT CAN HAPPEN You can collide with another vehicle. HOW TO AVOID THE HAZARD Never operate this ATV on any public street, road or highway, even a dirt or...
  • Page 86 Know the terrain where you ride. Ride cau- tiously in unfamiliar areas. Stay alert for holes, rocks, or roots in the terrain, and other hidden hazards which may cause the machine to upset. WARNING POTENTIAL HAZARD Failure to use extra care when operating this ATV on unfamiliar terrain.
  • Page 87 WARNING POTENTIAL HAZARD Failure to use extra care when operating on excessively rough, slippery or loose terrain. WHAT CAN HAPPEN Could cause loss of traction or vehicle control, which could result in an acci- dent, including an overturn. HOW TO AVOID THE HAZARD Do not operate on excessively rough, slippery or loose terrain until you have learned and practiced the skills neces-...
  • Page 88 When riding in an area where you might WHAT CAN HAPPEN not easily be seen, such as desert terrain, You could be in a collision. You could be mount a caution flag on the machine. DO injured. NOT use the flag pole bracket as a trailer HOW TO AVOID THE HAZARD hitch.
  • Page 89 Select a large, flat area off-road to become With the engine idling, shift the drive select familiar with your ATV. Make sure that this lever into low or high. Then release the area is free of obstacles and other riders. parking brake.

  • Page 90: Turning Your Atv

    TURNING YOUR ATV HOW TO AVOID THE HAZARD To achieve maximum traction while riding Always follow proper procedures for off-road, the two rear wheels are mounted turning as described in this Owner’s solidly on one axle and turn together at the Manual.
  • Page 91 Once you have learned this technique you should be able to perform it at higher speeds or in tighter curves. Improper riding procedures such as abrupt throttle changes, excessive braking, incor- rect body movements, or too much speed for the sharpness of the turn may cause the ATV to tip.

  • Page 92: Climbing Uphill

    CLIMBING UPHILL HOW TO AVOID THE HAZARD Use proper riding techniques to avoid ve- Never operate the ATV on hills too hicle overturns on hills. Be sure that you steep for the ATV or for your abilities. can maneuver your ATV well on flat Practice on smaller hills before attempt- ground before attempting any incline and ing large hills.
  • Page 93 WARNING An obstacle, a sharp drop, or another vehicle or person could be on the other POTENTIAL HAZARD side of the hill. Climbing hills improperly. WHAT CAN HAPPEN Could cause loss of control or cause the ATV to overturn. HOW TO AVOID THE HAZARD Always follow proper procedures for climbing hills as described in this Own- er’s Manual.
  • Page 94 If you are climbing a hill and you find that WARNING you have not properly judged your ability POTENTIAL HAZARD to make it to the top, you should turn the Improperly crossing hills or turning on ATV around while you still have forward hills.
  • Page 95 When crossing the side of a hill: Always follow proper procedures as de- scribed in the Owner’s Manual. Avoid hills with excessively slippery or loose surfaces. Shift your weight to the uphill side of the ATV. 7-27...
  • Page 96 If your ATV has stalled or stopped and you front and rear brakes gradually, or dis- believe you can continue up the hill, restart mount the ATV immediately on the uphill carefully to make sure you do not lift the side.
  • Page 97 If you begin rolling backwards: Keep weight uphill. 2WD: Never apply the rear brake while rolling backwards. Apply the front brake. 4WD: Apply both front and rear brakes gradually. When fully stopped, shift into the parking position. Dismount on uphill side or to a side if pointed straight uphill.

  • Page 98: Riding Downhill

    RIDING DOWNHILL When this ATV is in 4WD, all wheels (front When riding your ATV downhill, shift your and rear) are interconnected by the drive weight as far to the rear and uphill side of train. This means that applying either the the ATV as possible.
  • Page 99 WARNING POTENTIAL HAZARD Going down a hill improperly. WHAT CAN HAPPEN Could cause loss of control or cause the ATV to overturn. Always follow proper procedures for going down hills as described in this Owner’s Manual. Note: a special tech- nique is required when braking as you go down a hill.

  • Page 100: Crossing A Slope

    CROSSING A SLOPE WARNING Traversing a sloping surface on your ATV POTENTIAL HAZARD requires you to properly position your Improperly crossing hills or turning on weight to maintain proper balance. Be sure hills. that you have learned the basic riding skills WHAT CAN HAPPEN on flat ground before attempting to cross a Could cause loss of control or cause the...
  • Page 101 7-33...

  • Page 102: Crossing Through Shallow Water

    CROSSING THROUGH SHALLOW WATER Remember that wet brakes may have The ATV can be used to cross slow mov- reduced stopping ability. Test your ing, shallow water of up to a maximum of brakes after leaving water. If necessary, 35 cm (14 inches) in depth. Before entering apply them several times to let friction the water, choose your path carefully.
  • Page 103 Test your brakes after leaving the water. CAUTION: Do not continue to ride your ATV without After riding your ATV in water, be sure to verifying that you have regained proper drain the trapped water by removing the braking ability. check hose at the bottom of the air filter case and the check hose on the V-belt cooling duct.
  • Page 104 1. V-belt cooling duct check hose (Left front side of ATV) 1. Drive select lever box check hose 1. V-belt cooling intake box check hose (Above V-belt cooling duct) 7-36...

  • Page 105: Riding Over Rough Terrain

    RIDING OVER ROUGH TERRAIN WARNING Riding over rough terrain should be done POTENTIAL HAZARD with caution. Look out for obstacles which Improperly operating over obstacles. could cause damage to the ATV or could WHAT CAN HAPPEN lead to an upset or accident. Be sure to Could cause loss of control or a colli- keep your feet firmly mounted on the foot- sion.

  • Page 106: Sliding And Skidding

    SLIDING AND SKIDDING If the rear wheels of your ATV start to slide Care should be used when riding on loose sideways, control can usually be regained or slippery surfaces since the ATV may (if there is room to do so) by steering in the slide.
  • Page 107 With practice, over a period of time, skill at WARNING controlled sliding can be developed. The POTENTIAL HAZARD terrain should be chosen carefully before Skidding or sliding improperly. attempting such maneuvers, since both WHAT CAN HAPPEN stability and control are reduced. Bear in You may lose control of this ATV.

  • Page 108: What To Do If

    WHAT TO DO IF ... If your ATV starts to slide sideways: This section is designed to be a reference Steer in the direction of the slide if you guide only. Be sure to read each section on have the room. Applying the brakes or riding techniques completely.
  • Page 109 If your ATV is traversing a sloping sur- face: Be sure to ride with your weight posi- tioned towards the uphill side of the ATV to maintain proper balance. If the ATV starts to tip, steer down the hill (if there are no obstacles in your way) to regain balance.

  • Page 110: Periodic Maintenance And Adjustment

    EBU00515 PERIODIC MAINTENANCE AND Have a Yamaha dealer perform service if ADJUSTMENT you are not familiar with machine ser- vice. Periodic inspection, adjustment and lubri- cation will keep your machine in the safest EBU00535 and most efficient condition possible. Owner’s manual and tool kit Safety is an obligation of the machine You are recommended to put this owner’s...
  • Page 111 Never modify this ATV through improp- able during a service operation requiring er installation or use of accessories. All one, take your machine to a Yamaha deal- parts and accessories added to this ve- er to check the torque settings and adjust hicle should be genuine Yamaha or them as necessary.

  • Page 112: Periodic Maintenance/Lubrication

    EBU00261 PERIODIC MAINTENANCE/LUBRICATION INITIAL EVERY ITEM ROUTINE month months months months year • Check valve clearance. Valves* • Adjust if necessary. • Check coolant leakage. Cooling system • Repair if necessary. • Replace coolant every 24 months. • Check condition. Spark plug •...
  • Page 113 • Replace if damaged. • Check all chassis fittings and fasteners. Fittings and Fasteners* • Correct if necessary. * It is recommended that these items be serviced by a Yamaha dealer. NOTE: • Recommended brake fluid: DOT 4 • Brake fluid replacement: 1.

  • Page 114: Panel Removal And Installation

    EBU00614 Panel removal and installation The panels illustrated need to be removed to perform some of the maintenance de- scribed in this chapter. Refer to this section each time a panel has to be removed or reinstalled. 1. Panel C 2.
  • Page 115 EBU00700 Panel A, D To remove 1. Remove the seat. 2. Pull outward on the areas shown, and then pull upward.
  • Page 116 To install 1. Place the panel in its original position. 2. Install the seat.
  • Page 117 EBU00616 Panel B To remove Remove the bolts. To install Place the panel in the original position and install the bolts. 1. Panel B 2. Bolt (× 2)
  • Page 118 EBU00617 Panel C To remove 1. Remove the front carrier bolts and the front carrier. 2. Remove the quick fasteners and pull upward. 1. Bolt (× 2) 1. Bolt (× 4) 1. Quick fastener (× 2)
  • Page 119 EBU00616 To install Panel E 1. Place the panel in the original position To remove and install the quick fasteners. Remove the bolts. 2. Install the front carrier and the bolts, To install then tighten to the specified torque. Place the panel in the original position and install the bolts.
  • Page 120 EBU00638 Panel F To install To remove Place the panel in its original position. Pull outward on the areas shown. 1. Panel F 8-11...

  • Page 121: Engine Oil

    EBU00697 Engine oil NOTE: Oil level inspection Wait a few minutes until the oil level settles 1. Place the machine on a level place and before checking. warm up the engine for several min- 4. The oil level should be between the utes.
  • Page 122 Engine oil and oil filter cartridge replace- 5. Remove the oil filter by using an oil fil- ment ter wrench. 1. Remove panels E and F. (See pages 8-10 ~ 8-11 for removal and installa- tion procedures.) 2. Warm up the engine for several min- utes.
  • Page 123 7. Apply a light coat of engine oil to the NOTE: O-ring of the new oil filter. An oil filter wrench is available at a nearby Yamaha dealer. NOTE: Make sure the O-ring is seated properly. 6. Install the drain bolt and tighten it to the specified torque.

  • Page 124: Final Gear Oil

    9. Fill the engine with sufficient oil to 10. Start the engine and warm it up for reach the specified level. Install the several minutes. While warming up, dipstick and tighten it. check for oil leakage. If oil leakage is found, stop the engine immediately Recommended oil: and check for the cause.
  • Page 125 Final gear oil replacement 1. Remove the final gear case cover. 1. Final gear oil 2. Final gear case filler bolt 3. Proper level 1. Bolt (× 2) CAUTION: 2. Place the machine on a level place. Be sure no foreign material enters the final 3.
  • Page 126 Recommended oil: SAE 80 API “GL-4” Hypoid gear oil Oil quantity: Periodic oil change: 0.19 L (0.17 Imp qt, 0.2 US qt) Total amount: 0.22 L (0.19 Imp qt, 0.23 US qt) CAUTION: 1. Final gear case drain bolt Be sure no foreign material enters the final 5.

  • Page 127: Differential Gear Oil

    EBU00706 Differential gear oil 3. Install the oil filler bolt and tighten it to Differential gear oil measurement the specified torque. 1. Place the machine on a level place. Tightening torque: 2. Remove the oil filler bolt and check the Oil filler bolt: oil level.
  • Page 128 4. Install the drain bolt and tighten it to CAUTION: the specified torque. Be sure no foreign material enters the dif- Tightening torque: ferential gear case. Drain bolt: 6. Install the filler bolt and tighten it to 10 Nm (1.0 m·kg, 7 ft·lb) the specified torque.

  • Page 129: Cooling System

    EBU00771 Cooling system 3. Remove the coolant reservoir cap, and 1. Check the coolant level in the coolant then add coolant or distilled water to reservoir when the engine is cold as raise it to the specified level. the coolant level will vary with engine 4.

  • Page 130: Changing The Coolant

    NOTE: WHAT CAN HAPPEN If water is added, have a Yamaha deal- You could be burned by hot fluid and er check the antifreeze content of the steam blown out under pressure.
  • Page 131 1. Place the ATV on a level surface. 2. Remove panels E and F. (See page 8-10 and 8-11 for panel removal and installa- tion procedures.) 3. Place a container under the engine, and then remove the coolant drain bolt. (Use a trough or a similar object as shown to prevent coolant from spilling on the footrest.) 1.
  • Page 132 1. Radiator cap 1. Coolant reservoir drain hose 5. Remove the radiator cap. 8. After draining the coolant, thoroughly 6. Remove the coolant reservoir cap. flush the cooling system with clean 7. Disconnect the hose on the coolant tap water. reservoir side, and then drain the cool- 9.
  • Page 133 Total amount: NOTE: 1.1 L (0.97 Imp qt, 1.14 US qt) If any leakage is found, have a Yamaha Coolant reservoir capacity: dealer check the cooling system. 0.25 L (0.22 Imp qt, 0.26 US qt) 16. Install the panels and the front carrier.

  • Page 134: Front Axle Boots

    Removal tears. If any damage is found, have them 1. Remove the spark plug cap. replaced by a Yamaha dealer. 1. Spark plug cap 2. Use the spark plug wrench in the tool 1. Front axle boot (× 2 each side) kit to remove the spark plug as shown.
  • Page 135 0.6 ~ 0.7 mm (0.02 ~ 0.03 in) around the center electrode is a medium- to-light tan color for a ATV that is being rid- den normally. Do not attempt to diagnose such problems yourself. Instead, take the ATV to a Yamaha dealer. You should periodically 8-26...

  • Page 136: Spark Plug

    NOTE: If a torque wrench is not available when you are installing a spark plug, a good esti- mate of the correct torque is 1/4 to 1/2 turn past finger tight. Have the spark plug tight- ened to the specified torque as soon as possible.

  • Page 137: Air Filter Cleaning

    EBU00288 Air filter cleaning NOTE: There is a check hose at the bottom of the air filter case. If dust or water collects in this hose, empty the hose and clean the air filter element and air filter case. 1. Clip (× 4) 2.
  • Page 138 WARNING POTENTIAL HAZARD Using low flash point solvents or gaso- line to clean the air filter element. WHAT CAN HAPPEN Low flash point solvents or gasoline can catch fire or explode. HOW TO AVOID THE HAZARD Use parts cleaning solvent to clean the 1.
  • Page 139 7. Apply Yamaha foam air filter oil or NOTE: The air filter element should be cleaned ev- other quality foam air filter oil to the el- ement. If foam air filter oil is not avail- ery 20 ~ 40 hours. It should be cleaned and lubricated more often if the machine is op- able, motor oil may be used.

  • Page 140: V-Belt Cooling Duct Check Hose

    EBU00641 V-belt cooling duct check hose If dust or water collects in this hose, re- move the hose and clean it. 1. V-belt cooling intake box check hose (Above V-belt cooling duct) 1. V-belt cooling duct check hose (Left front side of ATV) 8-31...

  • Page 141: Spark Arrester Cleaning

    EBU00522 Spark arrester cleaning Select a well-ventilated area free of com- bustible materials and make sure the ex- haust and muffler are cool. 1. Remove the bolt. 2. Remove the tailpipe by pulling it out of the muffler. 1. Spark arrester 4.

  • Page 142: Carburetor Adjustment

    CAUTION: Could start a fire. HOW TO AVOID THE HAZARD The carburetor was set at the Yamaha fac- When purging the exhaust system: tory after many tests. If the settings are Always let the exhaust system cool pri- disturbed by someone without sufficient or to touching exhaust components.

  • Page 143: Idle Speed Adjustment

    Turn clearance must be adjusted regularly. This the screw in to increase engine speed, adjustment however, should be left to a and out to decrease engine speed. professional Yamaha service technician. Specified idle speed: 1,450 ~ 1,550 r/min 8-34...

  • Page 144: Throttle Lever Adjustment

    EBU00307 Throttle lever adjustment NOTE: Adjust the engine idling speed before ad- justing the throttle lever free play. 1. Loosen the locknut. 2. Turn the adjusting bolt until the throt- tle lever free play is 3 ~ 5 mm (0.11 ~ 0.20 in).

  • Page 145: Front Brake Pad Inspection

    EBU00312 Front brake pad inspection Inspect the brake pads for damage and wear. If the thickness is less than the spec- ified value, have a Yamaha dealer replace the pads. a. Wear limit: 1 mm (0.04 in) NOTE: The wheels need to be removed to inspect the brake pads.

  • Page 146: Rear Brake Pad Inspection

    Inspect the grooves. If EBU00622 they have almost disappeared, ask a Inspecting the brake fluid level Yamaha dealer to replace the pad. Insufficient brake fluid may let air enter the brake system, possibly causing the brakes to become ineffective.
  • Page 147 Observe these precautions: FRONT 1. When checking the fluid level, make sure the top of the master cylinder res- ervoir is level by turning the handle- bars. 2. Use only the designated quality brake fluid. Otherwise, the rubber seals may deteriorate, causing leakage and poor brake performance.

  • Page 148: Brake Fluid Replacement

    The front brake lever should have a free up spilled fluid immediately. play of zero mm (zero in) at the lever end. If 6. Have a Yamaha dealer check the cause not, ask a Yamaha dealer to adjust it. if the brake fluid level goes down.
  • Page 149 Make sure the brakes do not drag. Make sure the brakes are not spongy. All air must be bled from the brake system. Replacement of brake components re- quires professional knowledge. These procedures should be performed by a Yamaha dealer. 8-40...

  • Page 150: Rear Brake Lever Adjustment

    The top of the brake pedal should be posi- tioned 53 ~ 60 mm (2.09 ~ 2.36 in ) above the top of the footrest. If not, ask a Yamaha dealer to adjust it. 1. Locknut 2. Adjusting bolt c.
  • Page 151 Make sure the brakes do not drag. All air must be bled from the brake system. Replacement of brake components re- quires professional knowledge. These procedures should be performed by a Yamaha dealer. 8-42...

  • Page 152: Cable Inspection And Lubrication

    Inspect cables frequently. Replace dam- aged cables. Lubricate the inner cables and the cable ends. If the cables do not operate smooth- ly, ask a Yamaha dealer to replace them. Recommended lubricant: Yamaha chain and cable lube or SAE 10W30 motor oil...

  • Page 153: Wheel Removal

    EBU00373 Wheel removal 1. Elevate the wheel by placing a suitable stand under the frame. 2. Remove the nuts from the wheel. 3. Remove the wheel assembly. 1. Tapered nut (× 4) 8-44...

  • Page 154: Wheel Installation

    EBU00702 Wheel installation 1. Tapered wheel nuts are used for both When installing the wheel, reverse the re- front and rear wheels. Install the nut moval procedure. with its tapered side towards the wheel. NOTE: The arrow mark on the tire must point toward the rotating direction of the wheel.

  • Page 155: Battery

    Keep out of reach of chil- ter in the battery. If the battery seems to dren. have discharged, consult a Yamaha dealer. Antidote: EXTERNAL: Flush with water. CAUTION: INTERNAL: Drink large quantities of wa- Do not try to remove the sealing caps of ter or milk.

  • Page 156: Battery Maintenance

    Then, install a new fuse of installation. the specified amperage. Turn on the main switch. If the fuse immediately CAUTION: blows again, consult a Yamaha dealer. A special battery charger (constant volt- age/ampere or constant voltage) is re- quired recharging sealed-type battery.
  • Page 157 1. Main fuse 2. Spare fuse 1. Headlight fuse 2. Ignition fuse 3. Auxiliary DC jack fuse 4. Four-wheel-drive fuse 5. Spare fuse (× 3) Specified fuses: Main fuse: Headlight fuse: Ignition fuse: Auxiliary DC jack fuse: Four-wheel-drive fuse: 1. Fuse box 8-48...

  • Page 158: Replacing The Headlight Bulb

    EBU00632 Replacing the headlight bulb WARNING If the headlight bulb burns out, replace it as POTENTIAL HAZARD follows: Using an improper fuse. 1. Remove the cover at the rear of the WHAT CAN HAPPEN headlight. An improper fuse can cause damage to the electrical system which could lead to a fire.
  • Page 159 WARNING POTENTIAL HAZARD The headlight bulb is hot when it is on and immediately after it is turned off. WHAT CAN HAPPEN You can be burned, or a fire could start if the bulb touches something flammable. HOW TO AVOID THE HAZARD Wait for the bulb to cool before touch- 1.

  • Page 160: Headlight Beam Adjustment

    EBU00639 Headlight beam adjustment Taillight bulb replacement 1. Remove the screws and the lense. CAUTION: It is advisable to have a Yamaha dealer make this adjustment. 1. Vertical adjustment: To raise the beam, turn the adjusting screw clockwise. To lower the beam, turn the screw counterclockwise.
  • Page 161 1. Taillight bulb 3. Install a new bulb by pushing it inward and turning it clockwise. 4. Install the lense and tighten the screws. CAUTION: Do not over-tighten the screws as the lens may break. 8-52...

  • Page 162: Troubleshooting

    If your machine requires HOW TO AVOID THE HAZARD Do not smoke when checking the fuel any repair, take it to a Yamaha dealer. system. Make sure there are no open The skilled technicians at a Yamaha dealer-...

  • Page 163: Troubleshooting Chart

    No fuel. 2. Compression There is compression. Compression normal. Use the electric starter to see if there is compression. Ask a Yamaha dealer to No compression. inspect. 3. Ignition Wipe clean with dry cloth. Ignition system is Spark is good.
  • Page 164 Restart the engine. If the engine overheats again, ask a Level is OK. Yamaha dealer to inspect and/or repair the cooling system. NOTE: If it is difficult to get the recommended coolant, tap water can be temporarily used, provid- ed that it is changed to the recommended coolant as soon as possible.
  • Page 165 WARNING POTENTIAL HAZARD Removing the radiator cap when the en- gine and radiator are still hot. WHAT CAN HAPPEN You could be burned by hot fluid and steam blown out under pressure. HOW TO AVOID THE HAZARD Wait for the engine to cool before re- moving the radiator cap.

  • Page 166: Cleaning And Storage

    EBU00419 CLEANING AND STORAGE CAUTION: Excessive water pressure may cause wa- A. CLEANING ter seepage and deterioration of wheel Frequent, thorough cleaning of your ma- bearings, brakes, transmission seals and chine will not only enhance its appearance electrical devices. Many expensive repair but will improve its general performance bills have resulted from improper high and extend the useful life of many compo-...
  • Page 167 6. Clean the seat with a vinyl upholstery WARNING cleaner to keep the cover pliable and POTENTIAL HAZARD glossy. Operation with wet brakes after wash- 7. Automotive type wax may be applied ing. to all painted and chrome plated sur- WHAT CAN HAPPEN faces.

  • Page 168: Storage

    Do not apply NOTE: oil to any rubber parts or the seat cov- Use of fuel stabilizer and conditioner elimi- nates the need to drain the fuel system. Consult a Yamaha dealer if the fuel system needs to be drained instead.
  • Page 169 7. Remove the battery and charge it. Store it in a dry place and recharge it once a month. Do not store the battery in an excessively warm or cold place (less than 0 ˚C (30 ˚F) or more than 30 ˚C (90 ˚F)).

  • Page 170: Specifications

    EBU00428 SPECIFICATIONS Model YFM400FWAN(C) Dimensions: Overall length 1,965 mm (77.36 in) Overall width 1,070 mm (42.13 in) Overall height 1,120 mm (44.09 in) Seat height 820 mm (32.28 in) Wheelbase 1,225 mm (48.23 in) Minimum ground clearance 245 mm (9.65 in) Minimum turning radius 3,000 mm (118.11 in) Basic weight:...
  • Page 171 Model YFM400FWAN(C) Engine oil: 0° 10° 30° 50° 70° 90° 110° 130°F Type YAMALUBE 4 (20W40) or SAE 20W40 YAMALUBE 4 (10W30) or SAE 10W30 SAE 5W30 -20° -10° 0° 10° 20° 30° 40° 50°C Recommended engine oil classification: API Service SE, SF, SG type or higher CAUTION Be sure to use motor oils that do not contain anti- friction modifiers.
  • Page 172 Model YFM400FWAN(C) Final gear case oil: Type SAE80 API “GL-4” Hypoid gear oil Quantity: Periodic oil change 0.19 L (0.17 Imp qt, 0.2 US qt) Total amount 0.22 L (0.19 Imp qt, 0.23 US qt) Differential gear case oil: Type SAE80 API “GL-4”...
  • Page 173 Model YFM400FWAN(C) Spark plug: Type/manufacturer DR8EA / NGK Spark plug gap 0.6 ~ 0.7 mm (0.02 ~ 0.03 in) Clutch type Wet, centrifugal automatic Transmission: Primary reduction system V-belt Secondary reduction system Spur gear 39/24 × 24/18 × 33/9 (7.944) Secondary reduction ratio Transmission type V-belt automatic...
  • Page 174 Model YFM400FWAN(C) Brake: Front brake type Dual disc brake operation Right hand operation Rear brake type Single disc brake operation Left hand and right foot operation Suspension: Front suspension Double wishbone Rear suspension Swingarm (monocross) Shock absorber: Front shock absorber Coil spring / oil damper Rear shock absorber Coil spring / oil damper...
  • Page 175 Model YFM400FWAN(C) Bulb voltage, wattage × quantity: 12 V, 30 W/ 30 W × 2 Headlight 12 V, 7.5 W × 1 Tail light 12 V, 1.7 W × 1 Neutral indicator light 12 V, 1.7 W × 1 Reverse indicator light 12 V, 1.7 W ×...

  • Page 176: Noise Regulation

    EBU00430 NOISE REGULATION TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED: Federal law prohibits the following acts or the causing thereof: (1) The removal or render- ing inoperative by any person other than for purposes of maintenance, repair, or replace- ment of any device or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use or (2) the use of the vehicle after such device or element of design has been removed or ren- dered inoperative by any person.

  • Page 177: Maintenance Record

    EBU00431 MAINTENANCE RECORD Copies of work orders and/or receipts for parts you purchase and install will be required to document maintenance done in accordance with the warranty. The chart below is printed only as a reminder to you that the maintenance work is required. It is not acceptable proof of maintenance work.

  • Page 178: Atv Limited Warranty

    EBU00432 YAMAHA MOTOR CORPORATION, U.S.A. ATV LIMITED WARRANTY 13-1...
  • Page 179 1313 1313 1313 13-2...

  • Page 180: Yamaha Extended Service (Y.e.s.)

    EBU00435 YAMAHA EXTENDED SERVICE (Y.E.S.) 14-1...
  • Page 181 1414 EBU00436 1414 WARNING 1414 Indicates a potential hazard that could re- sult in serious injury or death. 14-2...
  • Page 182 EBU00437 14-3...
  • Page 184 LOCATE AND READ OWNER'S MANUAL. FOLLOW ALL INSTRUCTIONS AND WARNINGS. (For replacement manual, call 1-800-532-1558) YAMAHA MOTOR CO., LTD. PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2000 · 4 - 5.8 × 1 CR...

This manual is also suitable for:

Kodiak ultramatic yfm400fwanc 2000

Table of Contents