Premaintenance Procedures; Raising The Mower For Access - Toro 74568TE Operator's Manual

Grandstand mower with 122cm turbo force cutting unit
Hide thumbs Also See for 74568TE:
Table of Contents

Advertisement

Premaintenance
Procedures

Raising the Mower for Access

The front of the mower can be raised and supported on its
back for access under the machine for maintenance.
1. Raise the platform; refer to Operating the Platform
(page 21).
2. Remove the battery.
Figure 33
1. Wing nut
2. Battery cover
3. Negative-battery cable (–)
3. Drain the fuel from the fuel tank; refer to Draining
the Fuel Tank (page 37).
4. Remove the cap of the hydraulic tank, and place a piece
of plastic over the opening and install the hydraulic cap.
Note: This will seal the hydraulic tank and prevent
it from leaking out.
4. Positive-battery cable (+)
5. Battery
1. Cap
2. Piece of plastic
5. With 2 people, raise the front of the mower so that
it rests on the drive tires and the platform in the up
position.
6. Perform any maintenance on the machine.
7. With 2 people, lower the front of the mower to the
ground.
8. Remove the plastic under the hydraulic tank cap.
9. Install the battery for the machine.
29
Figure 34
3. Hydraulic tank

Advertisement

Table of Contents
loading

Table of Contents