Programming Powder Quantity; Programming Coffee Temperature; Programming Water Quantity - Capresso C3000 User Manual

• Economy mode
• Clock/time
• Automatic turn-on time
• Auto shut-off time
• Supplies and cup counter
• Language selection
For your information: you can go to a specific programming
+
section by pushing the
DISPLAY
shown in the .

15.1 Programming Powder Quantity

• DISPLAY COFFEE READY.
• Press the button for a few seconds until you hear a beep.
P
• DISPLAY POWDER QUANTITY / PRESS KEY.
• Now press the coffee button (Fig. 2; button D, E, F) that you
want to program. The corresponding coffee quantity for 2
cups is adjusted automatically by the machine after programming
is finished.
• DISPLAY POWDER ·········· II ··········
• The powder quantity can be selected by pressing the
buttons briefly.
• To store the new coffee quantity in memory press the
• POWDER QUANTITY / PRESS KEY.
DISPLAY
• You can go the next setting by pressing the

15.2 Programming Coffee Temperature

• COFFEE READY.
DISPLAY
or
buttons until the section is
+
.
P
+
button.
• Press button for a few seconds until you hear a beep.
P
+
• Press the
PRESS KEY.
• Now press the coffee button (Fig.2; button D,E,F) that you
want to program. The temperature for 2 cups is adjusted
automatically by the machine after programming is finished.
• Select the required temperature (high or normal) by pressing
+
the or
• To store the new coffee temperature in memory press the
button.
P
• DISPLAY TEMP. COFFEE / SELECT KEY
• You can call up the next setting by pressing the

15.3 Programming Water Quantity

• Make sure you have coffee beans in the bean container.
• DISPLAY WATER QUANTITY/PRESS KEY
This program allows you to set the brew quantity for the
special coffee button, the 1-cup small and the 2-cup large
+
or button (Fig.2;C,D,and E). When setting the quantities the
machine will automatically set the quantities for the
corresponding 2-cup buttons doubling the amount of water.
button.
• Put a cup under the coffee spout (Fig. 8a or 8b) and press
the coffee button you want to program (ex. 1 small cup;
Fig.2,D).
• The C3000 will start grinding and the
following information:
button until you see DISPLAY
buttons.
DISPLAY
TEMP. COFFEE
+
button.
will show the
18.