Sd Memory Card - Oregon Scientific Action Cam ATC3K Owner's Manual

Setting the Day
When adjusting the day, the "D" will be shown. Press the 'Menu
button' to adjust the day. Press the 'Confirm' button
after which you would be able to adjust the and proceed to setting the time.
Setting the Time
When adjusting the hour, the "H" will be shown. Press the 'Menu
button' to adjust the hour. Press the 'Confirm' button
the hour, after which you would be able to adjust the and proceed to setting
the minute.
When adjusting the minute, the "M" will be shown. Press the 'Menu
button' to adjust the minute. Press the 'Confirm' button
the time and exit this mode.

SD Memory Card

In this unit, you can use SD Memory Cards of up to 4GB.
To use an SD memory card, turn off the ATC3K and insert the SD memory
card. When the camera is turned on again the SD card icon will be displayed
on the LCD screen.
The remaining time on the SD card will also be displayed on the LCD
screen. All of the video footage will now be saved onto the SD card.
21
Note:
1. If there is an error on the SD memory card, the SD card icon and the
letters 'Err' will be displayed on the LCD screen. In this case, turn off the
to verify,
camera and remove the SD card.
2. The SD card is equipped with a Write-Protect switch that can prevent
writing and formatting to the card. The letters 'Err' will be displayed if
the SD card is locked with Write-Protect switch.
3. We recommend using SanDisk regular or AData SD cards.
4. With use on Windows 2000 users must format to FAT otherwise the SD
to verify
card and camera may malfunction
Available Recording Time
The available recording time is an approximation (these vary depending on
the recording conditions and the type of card).
to verify
Picture quality
VGA QVGA
setting 30 fps 30 fps
Internal
32 MB 51 s 1 min 36 s
Memory
1 GB 30 min 57 min
SD
Memory
114 min
2 GB 60 min
Card
4 GB 120 min 216 min
22