Waterproof Feature cause a fire or an electrical shock. This ATC-2K camera is waterproof up to 3m. Oregon Scientific will not assume any • Do not leave the camera in places subject to extremely high temperatures, such as under direct responsibility for malfunction of the camera caused by water getting inside as a result sunlight for extended periods of time.
AT18_manual_UK_31Jan2007 2/2/07 6:14 PM Page 3 II) Technical Specifications Step 2: Add one extra o-ring for more protection. • Sensor resolution 640x480 VGA CMOS sensor Add one extra o-ring • Built-in memory 32MB for more protection, follow the same • SD memory card drive supports cards of up to 2GB (Not included) instruction as Step 1.
AT18_manual_UK_31Jan2007 2/2/07 6:14 PM Page 4 IV) Camera Description III) Computer System Requirements Minimum System Requirements • Pentium III 800 MHz or higher 1. Lens • Windows XP, Windows 2000 2. Camera grip • 128 MB RAM 3. Screw • 800 MB Free hard disk space 4.
AT18_manual_UK_31Jan2007 2/2/07 6:14 PM Page 5 V) Camera Mounting Description 17. LCD display 18. ON/OFF & Enter button The camera can be mounted in a number of ways using the straps and the Velcro patch 19. Movie shutter button provided. Please follow the methods of mounting as suggested below: Turn it clockwise 20.
AT18_manual_UK_31Jan2007 2/2/07 6:14 PM Page 6 Mounting the camera using the velcro strap: VI) Quick Start 1. Attach the rubberized patch to the bottom of the helmet grip. Battery Installation 2+3. Place the helmet grip on the helmet, and thread the velcro strap 1.
Inserting/Removing the SD memory Card e) Non-rechargeable batteries are not to be recharged. Make sure the ATC-2K is turned off during the insertion or the removal of the f) Rechargeable batteries are to be removed from the camera before being SD card.
AT18_manual_UK_31Jan2007 2/2/07 6:14 PM Page 8 d. The card and the data may be damaged if the SD card is inserted or VII) Menu Settings removed while the camera is still on. 1. Press and hold the Menu button for 2 seconds (one Taking Video Footage beeping sound) to start selecting options.
AT18_manual_UK_31Jan2007 2/2/07 6:14 PM Page 9 5. The different mode icons are shown in the table below. Resolution a) 640 x 480, 320 x 240, 160 x 120 pixels resolution To change the resolution, press the Menu button until the Icon Title Description...
AT18_manual_UK_31Jan2007 2/2/07 6:14 PM Page 10 Sound Recording Item Picture size When the sound icon is flashing, the “ON” will be shown on screen. “ON” means recording sound during filming. Press the 'Movie shutter button' (one beeping sound) to switch to “OFF” 640 X 480 pixel which means no recording sound.
AT18_manual_UK_31Jan2007 2/2/07 6:15 PM Page 11 Setting the Month Delete All Video Footage When adjusting the month, the “M” will be turned on. Press the 'Movie shutter button' to adjust the month. Press the Enter button To delete all video footage stored in your camera, press the Menu button to confirm, after which you will be able to adjust the day.
8MB to 2GB. the recording conditions and the type of card. To use a SD memory card, turn off the ATC-2K and insert the SD memory card. When the camera is turned on again the SD card icon will be displayed...
1. Videos will be saved in AVI format. You can acquire recorded video footage from a PC by 2. If the ATC-2K is connected to the PC when the SD card is inserted in the connecting the ATC-2K to the PC. Connect your camera camera, the '100COACH' folder will show the files on the SD card.
-Do the batteries need replacing? conditions, such as indoors. After ATC-2K is connected to my PC, it cannot find the new drive in My I can't play the video footage on my television Computer folder -Make sure each end of the AV cable is properly and firmly connected to -Make sure each end of the ATC-2K USB cable is correctly connected.
Page 16
AT18_manual_UK_31Jan2007 2/2/07 6:15 PM Page 15 Note Further Help We make every effort to ensure the accuracy and appropriateness of the information provided on our products. However, errors can sometimes occur. We believe it is important for us to stand behind our products and we encourage you to email us at atc@oregonscientific.com, or call our Customer Service Department at with any problems and/or...
Page 18
AT18_manual_UK_31Jan2007 2/2/07 6:15 PM Page 17 Oregon Scientific (UK) Ltd. Unit 1, Switchback, Gardner Road, Maidenhead, Berkshire SL6 7RJ. Hotline number: 0871 222 1966 Email: Technical@oregonuk.com www.oregonscientific.co.uk This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.