Sound Recording; Deleting Video Footage; Setting Date/Time - Oregon Scientific Action Cam ATC3K Owner's Manual

Sound Recording

Once you have entered this mode the icon will keep flashing and
"LO" will be shown on screen. "LO" means sound is being
recorded during filming. Press Menu
switch to "OFF", which means no sound will be recorded.
After "OFF", it will loop back to "HI" when 'Menu'
again. Press the 'Confirm' button
confirm the setting and to go to the next function icon.

Deleting video footage

To delete the last video footage that was recorded, press the Menu button
until the LCD screen shows
Repeat these two steps to individually delete your files.
Note: After file deletion, the LCD screen will adjust the remaining number
of files accordingly.
Delete All Video Footage
To delete all video footage stored in your camera, press the Menu button
until the LCD screen shows . Press the Confirm button
Note: It may take a few minutes to delete multiple files at one time.
12 19
(one beeping sound) to
is pressed
(one beeping sound) to
. Press the Confirm button to confirm.
to verify.
Setting Date/Time (Clock Set)
Shift to the Date icon in the Menu mode by pressing the Menu button
repeatedly. When the Date icon is flashing, press the 'Confirm' button
change the date and time.
Setting the Year
1. Press the 'Menu button' to adjust the last digit of the year (2000-2009).
Press the 'Confirm' button
2. Press the 'Menu button' to adjust the 3rd digit of the year (200X-209X).
Pressing 'Confirm' will then move the cursor to allow you to adjust the
3rd digit of the year. Press the 'Menu' button
number and the 'Confirm' button
will be able to adjust the month.
Setting the Month
When adjusting the month, the "M" will be shown. Press the 'Menu
button' to adjust the month. Press the 'Confirm' button
after which you would be able to adjust the day and proceed to
setting the day.
to verify the last digit.
to select the
to verify, after which you
to verify,
to
20
12