Table of Contents
Advertisement
If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the
checklist below.
Any other servicing should be done by an authorized service representative.
If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water,
take it to a service center prior to continued use.
A WARNING A
To reduce the risk of persona! injury - Unplug before cleaning or servicing.
POSSIBLECAUSE
POSSIBLE SOLUTION
PROBLEM
Vacuum won't
run
Vacuum won't
pick up
or
Low suction
Dust escaping
from vacuum
Brushroll will
not turn
2. No voltage in wall plug.
4. Thermal
Protector
activated.
2. Check fuse or breaker
in home.
4. Unplug and allow vacuum to cool for 30min.
(This will reset the thermal protector)
1. Rinsable filter and/or filter
1. Clean rinsable filter and or filter made
made with HEPA media is dirty,
with HEPA media - Pg.10
pt
3. Brushroll
and/or
hose
clogged.
5. Valve is in the wrong mode
selection.
2. Dirt cup not installed correctly.
4, Rinsable
and/or
filter made
with HEPA media not installed
completely.
2. Brushroll
is clogged.
3. Check hose. Check brushroll - Pg.11.
5. Change
valve to the appropriate
mode.
2. Review dirt cup removal & replacement -
Pg. 9.
4, Review filter removal
and cleaning
- Pg. 10,
2. Clear/remove
debris from brushroll
- pg 11
13
Advertisement
Table of Contents
