Snmp User Table - D-Link DGS-3427 User Manual

SNMP User Table

The SNMP User Table displays all of the SNMP User's currently configured on the Switch.
In the SNMP Manager folder, located in the Administration folder, click on the SNMP User Table link. This will open
the SNMP User Table window, as shown below.
To delete an existing SNMP User Table entry, click the X below the Delete heading corresponding to the entry you wish to
delete.
To display the detailed entry for a given user, click on the View button. This will open the SNMP User Table Display
window, as shown below.
The following parameters are displayed:
Parameter
User Name
Group Name
SNMP Version
Auth-Protocol
Priv-Protocol
xStack DGS-3400 Series Fast Ethernet Switch
Figure 6- 32. SNMP User Table window
Figure 6- 33. SNMP User Table Display
Description
An alphanumeric string of up to 32 characters. This is used to identify the
SNMP users.
This name is used to specify the SNMP group created can request SNMP
messages.
V1 - Indicates that SNMP version 1 is in use.
V2 - Indicates that SNMP version 2 is in use.
V3 - Indicates that SNMP version 3 is in use.
None - Indicates that no authorization protocol is in use.
MD5 - Indicates that the HMAC-MD5-96 authentication level will be used.
SHA - Indicates that the HMAC-SHA authentication protocol will be used.
None - Indicates that no authorization protocol is in use.
DES - Indicates that DES 56-bit encryption is in use based on the CBC-DES
(DES-56) standard.
58