1050 Nfc Card, Nfc-Card Cable, And Nfc Antenna Assembly - Lenovo ThinkPad X1 Hardware Maintenance Manual

Removal steps of the Think LED light
Note: Do not close the connector flips before connecting the cable. When connecting the cable, ensure
that the connectors are attached firmly.

1050 NFC card, NFC-card cable, and NFC antenna assembly

Before you replace the NFC card, NFC-card cable, or NFC antenna assembly, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 50.
2. Remove the SIM card, SD card, and Base Module. See "Removing the SIM card, SD card, and Base
Module" on page 50.
3. Remove the back cover assembly. See "1020 Back cover assembly" on page 53.
4. Disconnect the cable of the built-in battery.
5. Remove the Think LED light. See "1040 Think LED light" on page 59.
Removal steps of the NFC card, NFC-card cable, and NFC antenna assembly
The NFC card, NFC-card cable, and NFC antenna assembly are only available on some models.
60
ThinkPad X1 Tablet Hardware Maintenance Manual