Lenovo ThinkPad X1 Hardware Maintenance Manual page 47

System board connectors and cables
Table 5. System board connector and cable guide
Item
Connector (location)
1
Think LED light connector (internal)
2
Coin-cell battery connector
(internal)
3
NFC card connector or infrared
camera card connector (internal)
4
Wireless-LAN antenna connector
(internal)
5
WiGig antenna connector (internal)
6
Camera card connector (internal)
7
Built-in battery connector (internal)
Internal cable required
Think LED light cable
Coin-cell battery cable
NFC-card cable or infrared camera
cable
Wireless-LAN antenna assembly
WiGig antenna assembly
Camera cable
Built-in battery cable
Cable connection
The Think LED light comes with a
cable. Connect the cable to this
connector.
The coin-cell battery comes with
a cable. Connect the cable to this
connector.
Connect one end to the NFC card
or infrared camera card and the
other end to this connector.
Connect one end of the
wireless-LAN antenna assembly to
the A-cover and the other end to
this connector.
Connect one end of the WiGig
antenna assembly to the A-cover
and the other end to this connector.
Connect one end to the camera
card and the other end to this
connector.
The built-in battery comes with a
cable. Connect the cable to this
connector.
.
Chapter 5 Locations
41