Period/Exposure; Shutter Length; Shutter Feedback; Shutter Retries - iOptron AllView Pro Instruction Manual

Table of Contents

Advertisement

Mirror Lock-up
Lock-up Time

Period/Exposure

Shutter Length

Shutter Feedback

Pretrigger Delay
Period/Exposure
4.4.6.
Set the total time between the start of the shutter triggering and the next mount movement. It can be set
from 0.1s to 60s. The factory default setting is 0.5 seconds.
Lock-up Time
Period/Exposure
Shutter Length
Shutter Feedback
Pretrigger Delay
Camera Setup
Shutter Length
4.4.7.
The amount of time that shutter signal is asserted ranging from bulb (B), 0.1 to 8 seconds. The factory
default setting is 0.5 seconds.
Period/Exposure
Shutter Length
Shutter Feedback
Pretrigger Delay
Camera Setup
Bank D
Shutter Feedback
4.4.8.
This function is used to automatically detect a missed shutter trigger, hence a missed photograph at
each position. The factory default setting is Off.
Shutter Length
Shutter Feedback
Pretrigger Delay
Camera Setup
Bank D
Autofocus

Shutter Retries

4.4.9.
When the Shutter Feedback is turned ON, the Shutter Retries submenu will be displayed. This
function will allow you to set how many times the camera will try to trig the shutter until it takes a photo
successfully. It can be set to try from 1 to 10 times. The factory default setting is 5.
Shutter Feedback
Shutter Retries
Pretrigger Delay
Camera Setup
Bank D
Autofocus
Lock-up Time 0.50s
0.25s
0.50s
OK
0.75s
1.00s
Period/Exposure 0.5s
0.25s
0.50s
OK
0.75s
1.00s
Shutter Length 0.5s
0.25s
0.50s
OK
0.75s
1.00s
Shutter Feedback Off
Off
OK
On
Shutter Retries 5
5
OK
6
7
8
23

Advertisement

Table of Contents
loading

Table of Contents