Table of Contents
Advertisement
Press OK to save the changes.
Here is the flow to record parameters to a specific bank, for example Bank D. Use MENU =>
Custom Settings Bank => select Bank A (or the bank is currently in use) => OK => use arrow key
to change it to [D] => OK => Load => OK to confirm.
Press X button to go back to Bank D menu. Go to settings below.
At the end of the setting, the parameter will be stored in the Bank D you selected and it will loaded
automatically next time the mount is turned on, until you change the settings or load a different bank.
Autofocus
4.4.2.
Turn the camera auto focus ON and OFF by moving the cursor and press OK button. Confirm saving
the changes. The factory default setting is Off.
Bank D
Autofocus
Mirror Lock-up
Period/Exposure
Shutter Length
Shutter Feedback
Time/Focus
4.4.3.
When the Autofocus is turned ON, the Time/Focus submenu will be displayed. This function will set
how long the camera will take to do the auto focus. The factory default setting is 0.10 seconds. The
time can be set from 0.05 seconds to 1 second, with 0.05 seconds increments. Move the cursor to a
desired number, press OK to select and confirm.
Autofocus
Times/Focus
Mirror Lock-up
Period/Exposure
Shutter Length
Shutter Feedback
Mirror Lock-up
4.4.4.
Turn the camera Mirror Lock-up function ON and OFF. The factory default setting is Off.
Times/Focus
Mirror Lock-up
Period/Exposure
Shutter Length
Shutter Feedback
Pretrigger Delay
Lock-up Time
4.4.5.
When Mirror Lock-up is set to ON, the Lock-up Time submenu will be displayed. This will allow you
set how long the mirror will be flipped up and delayed before the shutter is triggered. The delay ranges
from 0.25 seconds to 3 seconds with 0.25 seconds increments. The factory default setting is 0.50
seconds.
Bank D
Autofocus
Mirror Lock-up
Period/Exposure
Shutter Length
Shutter Feedback
Times/Focus 0.10s
0.05s
0.10s
OK
0.15s
0.20s
Mirror Lock-up Off
Off
OK
On
22
AutoFocus Off
Off
OK
On
Advertisement
Table of Contents
