Toyota 4runner 2009 User Manual page 446

Hide thumbs Also See for 4runner 2009:

Table of Contents

Installing the tire

Install the tire and loosely tighten each wheel nut by hand by

approximately the same amount.

Replacing a steel wheel

Tapered portion

5-2. Steps to take in an emergency

Remove all the wheel nuts and

When resting the tire on the

ground, place the tire so that the

wheel design faces up to avoid

scratching the wheel surface.

Remove any dirt or foreign mat-

ter from the wheel contact sur-

If foreign matter is on the wheel

contact surface, the wheel nuts

may loosen while the vehicle is

in motion, and the tire may

come off the vehicle.

Tighten the nuts until the tapered

portion comes into loose contact

with the disc wheel sheet.