Toyota 4runner 2009 User Manual page 343

3-6. Other interior features
Repeat the steps above to program another device for each of
the remaining HomeLink
346
Press and hold down one of the
buttons on the HomeLink
the button on the transmitter.
When the
®
HomeLink
to a rapid flash after 20 seconds,
you can release both buttons.
Test the
®
HomeLink
newly programmed button.
If programming a garage door
opener, check to see if the garage
door opens and closes. If the
garage door does not operate,
see if your garage transmitter is
of the Rolling Code type. Press
and hold
®
HomeLink
door has the rolling code feature
if the
®
HomeLink
seconds and then remains lit. If
your transmitter is the Rolling
Code type, proceed to the head-
ing "Programming a rolling code
system".
®
buttons.
®
indicator on
changes from a slow
operation of
by pressing
the programmed
button. The garage
indicator (on
) flashes rapidly for 2
and
the
the
the
the