Toyota 4runner 2009 User Manual page 409

Fuse
16 ACC
17 CIG
18 POWER
After a fuse is replaced
n
If the lights do not turn on even after the fuse has been replaced, a bulb
l
may need replacement. (→P. 415)
If the replaced fuse blows again, have the vehicle inspected by your
l
Toyota dealer.
If there is an overload in the circuits
n
The fuses are designed to blow before the entire wiring harness is damaged.
CAUTION
To prevent system breakdowns and vehicle fire
n
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
Never use a fuse of a higher amperage rating than indicated, or use any
l
other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
l
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
l Do not modify the fuse or the fuse box.
Ampere
Power outlets, outside rear view
mirrors, audio system, navigation
7.5 A system, shift lock control system,
instrument panel lights, rear seat
entertainment system
10 A No circuit
30 A Power windows, electric moon roof
4-3. Do-it-yourself maintenance
Circuit
4
413