Page 1 Customer Experience Center 1-800-331-4331 2009 Quick Reference Guide MN 00505-QRG09-MAT Printed in the USA 12/07...
Page 2 Interactive Owner’s Guide Seat belts Have a question about the main features of your new Toyota? Find the answers quickly and easily in this Quick Reference Guide, which includes highlights from the Owner’s Manual. For more detailed information, and helpful interactive demonstrations and tips, visit www.Toyotaiguide.com.
Page 3: Table Of Contents
SAFETY AND Seat belts EMERGENCY FEATURES Seat belts-Shoulder belt anchor Spare tire & tools Tire Pressure Warning System Visit your Toyota dealer for information on customizing this feature. Programmable by customer. Refer to the Owner’s Manual for instructions and more information.
Page 4 OVERVIEW Instrument panel Steering wheel controls Steering wheel audio controls Voice command button Telephone controls Engine switch Cruise control VSC/TRAC OFF switch Auxiliary storage Power outside rearview mirror control Headlight, turn signal and front fog light controls Wiper and washer controls “AIR BAG ON”...
Page 5 Audio system Air Conditioning controls Outside rearview mirrors /Rear window defogger button Tire Pressure Warning System reset Tilt and telescopic steering control Hood lock release lever If equipped Vehicles with navigation system: for details, refer to the “Navigation System Owner’s Manual.”...
Page 6: Instrument Cluster
OVERVIEW Instrument cluster Service indicator and reminder Tachometer Speedometer Fuel gauge Trip meter reset/Instrument panel light control Engine coolant temperature Automatic Transmission shift range display (if equipped) Odometer and two trip meters...
Page 7: Indicator Symbols
Low engine oil pressure warning Engine oil replacement reminder Active torque control 4WD system warning If indicator does not turn off within a few seconds of starting engine, there may be a malfunction. Have vehicle inspected by your Toyota dealer.
Page 8: Fuel Tank Door Release And Cap
OVERVIEW Keyless entry (if equipped) Locking operation Unlocking operation Push ONCE: Driver door Push TWICE: All doors NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for safety. Panic button Push and hold Fuel tank door release and cap Pull Turn...
Page 9: Engine Maintenance
Hood release Pull up latch Pull and raise hood Engine maintenance 4 cylinder (2AZ-FE) engine 4 cylinder (2ZR-FE) engine Engine coolant reservoir Engine oil filler cap Engine oil level dipstick Windshield washer fluid tank Note: Regularly scheduled maintenance, including oil changes, will help extend the life of your vehicle and maintain performance.
Page 10: Auto Lock Functions 2
FEATURES/OPERATIONS Auto lock functions (if equipped) Automatic door locks can be programmed to operate in three different modes, or turned OFF. -Doors lock when shifting from “Park.” -Doors unlock when shifting into “Park.” -Doors unlock when the driver’s door is opened within 10 seconds after setting the engine switch to “ACC”...
Page 11: Seat Adjustments-Front
Seat adjustments-Front Manual seat Position Height crank (driver side only) Seatback angle Seats-Head restraints Rear Front Lock release button Lock release button Seat adjustments-Rear Pull Fold down...
Page 12: Clock
FEATURES/OPERATIONS Parking brake Release (2) Push (1) Pull slightly Pull (3) Lower Tilt and telescopic steering wheel Lock release lever Angle Length Hold wheel, push lever down, set angle and length, then return lever. Note: Do not attempt to adjust while the vehicle is in motion. Clock Hour set Minute set...
Page 13: Lights & Turn Signals
Lights & turn signals Headlights Headlights Parking lights High beam Low beam High beam flasher -Daytime Running Light system (DRL) Headlights turn on automatically upon starting engine. The brightness of the headlights will automatically change depending on the darkness of the surroundings. Front fog lights (if equipped) Turn Front fog lights come on only when the headlights are on low beam.
Page 14: Windows-Power
FEATURES/OPERATIONS Windshield wipers & washers Front Single wipe Adjust interval* Pull to wash and wipe Interval wipe Slow Fast * Intermittent windshield wiper interval adjustment Rotate up to decrease interval, down to increase interval (if equipped). Rear (if equipped) Wash and wipe Wipe Interval wipe Wash and wipe...
Page 15: Door-Back
Moonroof (if equipped) Sliding operation Tilting operation Recommended driving position to minimize wind noise. Open Tilt Close Close Door-Back Unlock Lock Open Door locks-Power (if equipped) Unlock Lock...
Page 16 FEATURES/OPERATIONS Audio Type 1 functions Preset buttons - functions in other modes indicated above number Eject CD Push to Push and turn turn to ON/OFF adjust tone & balance Seek station/ Push to skip CD track up/down select folder and radio category type...
Page 17 RADIO To preset stations Tune in the desired station and hold down a preset button (1-6) until you hear a beep. Push desired preset button (1-6) to select. To scan stations Push and hold “SCAN” to scan preset stations. Push again to hold selection.
Page 18: Air Conditioning/Heating
FEATURES/OPERATIONS Air Conditioning/Heating Airflow vent In “ ” or “ ” mode, use fresh air (“ ” indicator “OFF”) to reduce window fogging. Fan speed Temperature Air Conditioning ON/OFF Use for quick cooling. MAX A/C changes air intake to recirculate. It is not possible to change intake to fresh, or to turn A/C OFF in this mode.
Page 19: Auxiliary Storage
Cruise control (if equipped) Turning system ON/OFF System ON/OFF Functions Increase speed Resume Cancel Decrease speed The set speed may also be cancelled by depressing the brake pedal. The set speed may be resumed once vehicle speed exceeds 25 mph. Auxiliary storage Instrument panel Pull...
Page 20: Cup Holders
FEATURES/OPERATIONS Telephone controls (Bluetooth ® (if equipped) Vehicles with moonroof Vehicles without moonroof Steering wheel telephone switches Start call Volume control End call Voice command button ® Bluetooth technology allows you to place or receive calls without taking your hands from the steering wheel or using a cable to connect the compatible telephone and the system.
Page 21: Bottle Holders
Bottle holders Rear Front Power Outlet-12V DC Designed for 12V car accessories. The engine switch must be in the “ACC” or “ON” position. Power Outlet-115V AC (if equipped) ON/OFF switch Push The engine switch must be in the “ON” position. Push the AC115V switch to use outlet.
Page 22: Doors-Child Safety Locks
SAFETY AND EMERGENCY FEATURES Doors-Child safety locks Rear door Moving the lever to “LOCK” will allow the door to be opened only from the outside. Tire Pressure Warning System System reset initialization 1. Push and hold “ SET” button until the indicator blinks three times.
Page 23 Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING Air Conditioner Anti-lock Brake System Accessory Automatic Locking Retractor Child Restraint System Electronic Control Unit Event Data Recorder Emergency Locking Retractor GAWR Gross Axle Weight Rating GVWR Gross Vehicle Weight Rating Emission inspection and maintenance Light Emitting Diode Methylcyclopentadienyl Manganese Tricarbonyl M + S...
Page 24: Seat Belts
A wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available on the market. You should know that these parts are not covered by Toyota warranty and that Toyota is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 25 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 26 CAUTION General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that will hurt or kill you, your occupants or others.
Page 27 This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 29 TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column. When driving Driving, stopping and safe-driving information. Interior fea- Air conditioning and audio systems, as well as other in- tures terior features for a comfortable driving experience. Maintenance Cleaning and protecting your vehicle, performing do-it- and care...
Page 30 Pictorial index Exterior Headlights (low beam) P. 125 ∗ Moon roof P. 53 Headlights (high beam) P. 126 Outside rear view Hood P. 283 mirrors P. 49 Front turn signal/parking and front side marker lights P. 117, 125 Windshield wipers P.
Page 31 Rear window defogger P. 168 ∗ Fuel filler door P. 56 Rear window wiper P. 131 Doors P. 29 Back door P. 33 License plate lights P. 125 Tires Rotation P. 303 Replacement P. 362 Stop/tail and rear side Inflation pressure P.
Page 32 Pictorial index Interior Seat belts P. 41 SRS driver airbag P. 65 Head restraints P. 40 Bottle holders P. 241 Power window SRS front passenger ∗ switches P. 51 airbag P. 65 Glove box Bottle holders P. 241 P. 237 Cup holders P.
Page 33 Vehicles with moon roof Vanity mirrors P. 245 Sun visors P. 244 Auxiliary box P. 242 Moon roof switches P. 53 ∗ SRS curtain shield airbags P. 65 Interior lights P. 233 Personal/interior lights P. 234 Anti-glare inside rear view mirror P.
Page 34 Pictorial index Interior Vehicles without moon roof Vanity mirrors P. 245 Sun visors P. 244 Personal lights P. 235 ∗ SRS curtain shield airbags P. 65 Interior lights P. 233 Anti-glare inside rear view mirror P. 47...
Page 35 ∗ Door lock switch P. 29 Inside door lock button P. 29 ∗ Window lock switch P. 51 ∗ Power window switches P. 51 ∗ : If equipped...
Page 36 Pictorial index Interior ∗ Power outlet P. 249 Cup holders P. 239 ∗ Power outlet P. 249 Parking brake lever P. 118 ∗ Cigarette lighter P. 248 AUX adapter P. 196...
Page 37: Instrument Panel
Pictorial index Instrument panel Gauges and meters P. 119 Headlight switch P. 125 Turn signal lever P. 117 Emergency ∗ Fog light switch P. 128 flasher switch Security indicator Audio system P. 169 Outside rear view P. 60 Navigation system * mirror switches P.
Page 38 Pictorial index Instrument panel Air conditioning system P. 162 Rear window and outside rear view mirror defogger ∗ ∗ switch /rear window defogger switch P. 168...
Page 39 Engine (ignition) switch P. 106 ∗ Audio remote control Telephone switches ∗ switches * P. 197 P. 204 ∗ Cruise control switch P. 132 ∗ Talk switch P. 204 ∗ : If equipped : For vehicles with a navigation system, refer to “Navigation System Owner’s Manual”.
Page 40 Pictorial index Instrument panel ∗ Power outlet main switch P. 249 Clock P. 246 Shift lock override ∗ Shift lever P. 110, 115 button P. 377...
Page 41 ∗ VSC/TRAC off switch P. 135 Auxiliary box P. 242 Hood lock release lever P. 283 ∗ : If equipped...
Page 42: Before Driving
TABLE OF CONTENTS Index 1-7. Safety information ....63 Before driving Correct driving posture ..63 SRS airbags ......65 Front passenger occupant 1-1. Key information ....24 classification system... 77 Keys ........24 Child restraint systems ..82 Installing child restraints ..86 1-2.
Page 43: Interior Features
2-5. Driving information... 140 Hands-free phone system (for cellular phone) Cargo and luggage ..... 140 features ......200 Vehicle load limits ....143 Using the hands-free Winter driving tips ....144 phone system Trailer towing ...... 148 (for cellular phone) ... 203 Dinghy towing Making a phone call ...
Page 44: Maintenance And Care
TABLE OF CONTENTS Index Compass ......262 When trouble arises Maintenance and care 5-1. Essential information ..342 If your vehicle needs to 4-1. Maintenance and care..268 be towed ......342 If you think something Cleaning and protecting the is wrong ......
Page 45: Vehicle Specifications
Vehicle specifications 6-1. Specifications....390 Maintenance data (fuel, oil level, etc.).... 390 Fuel information ....405 Tire information ....408 6-2. Customization ....420 Customizable features ..420 6-3. Initialization ....... 422 Items to initialize ....422 For owners Reporting safety defects for U.S.
Page 46: Key Information
Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 378)
Page 47 1-1. Key information NOTICE To prevent key damage Do not subject the keys to strong shocks, expose them to high tempera- tures by placing them in direct sunlight, or get them wet. Do not expose the keys to electromagnetic materials or attach any mate- rial that blocks electromagnetic waves to the key surface.
Page 48: Opening, Closing And Locking The Doors
1-2. Opening, closing and locking the doors Wireless remote control (if equipped) The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle. Locks all doors Sounds an alarm (press and hold) Unlocks doors Pressing the button unlocks the driver’s door.
Page 49 When the wireless key battery is depleted If window tint with a metallic content or metallic objects are attached to the rear window Customization that can be configured at Toyota dealer Settings (e.g. operation signal) can be changed. (Customizable features →P. 420)
Page 50 1-2. Opening, closing and locking the doors Certification for wireless remote control For vehicles sold in the U.S.A. NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 51: Doors
1-2. Opening, closing and locking the doors Doors The vehicle can be locked and unlocked using the wireless remote control, key or door lock switch. Wireless remote control (if equipped) →P. 26 Locks the door Unlocks the door Vehicles with power door lock system: Turning the key locks and unlocks all doors.
Page 52 1-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened from inside the vehicle when the locks are set. These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
Page 53 1-2. Opening, closing and locking the doors Setting and canceling the functions To switch between set and canceled, follow the procedure below: STEP Close all the doors and switch the engine switch to the “ON” position. (Perform step 2 within 10 seconds.) Shift the shift lever to P or N, and STEP press and hold the driver's door...
Page 54 The doors cannot be locked when The key is in the engine switch and either of the front door is open. Customization that can be configured at Toyota dealer Settings (e.g. unlocking function using a key) can be changed. (Customiz- able features →P.
Page 55: Back Door
1-2. Opening, closing and locking the doors Back door The back door can be locked and unlocked using the wireless remote control or key. Wireless remote control (if equipped) →P. 26 Locks the back door Unlocks the back door Opens the back door Back door handle Use the back door handle when closing.
Page 56 1-2. Opening, closing and locking the doors CAUTION Caution while driving Keep the back door closed. This not only keeps personal belongings from being thrown out, but also pre- vents exhaust gases from entering the vehicle. NOTICE To prevent damage to the back door components Do not apply any force, paint or let any other foreign matter on the damper.
Page 57: Adjustable Components (Seats, Mirrors, Steering Wheel)
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only) Folding down the front passenger's seat (vehicles with seatback table) Move the seat rearward. STEP...
Page 58 1-3. Adjustable components (seats, mirrors, steering wheel) Lower the head restraint and fix STEP the seatback at the most upright lock position. Pull up either seatback lock STEP release knob beside the seat- back and fold the seatback down. Active head restraints (vehicles with side airbags and curtain shield airbags) When a front seatback receives strong impact,...
Page 59 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Seat adjustment Be careful that the seat does not hit passengers or luggage. Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of...
Page 60: Rear Seats
1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats The seatbacks of the rear seats can be folded down. Stow the rear outside seat belt STEP buckles and move the rear center seat belt buckle as shown. Lower the head restraints to STEP the lowest position.
Page 61 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION After returning the seatback to the upright position Observe the following precautions. Failure to do so may result in death or serious injury. Make sure that the seatback is securely locked in position by lightly rocking it back and forth.
Page 62: Head Restraints
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Vertical adjustment Push and hold the lock release button when lowering the head Lock restraint. release Removal button Pull the head restraint up while pressing the lock release but- ton. Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
Page 63: Seat Belts
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. Correct use of the seat belts l Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 64 1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of the belt (front seats) Down Move the height adjuster up and down as needed. Seat belt pretensioners (front seats) The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal...
Page 65 Replacing the belt after the pretensioner has been activated The seat belts cannot be used after a pretensioner has been activated. After an accident, have the pretensioners inspected by your Toyota dealer. Make sure the pretensioners are replaced if they have been activated.
Page 66 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system.
Page 67 Ensure that the belt and tab are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 68: Steering Wheel
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. STEP Hold steering wheel and press the lever down. STEP Adjust to the ideal position by moving the steering wheel hori- zontally and vertically.
Page 69: Anti-Glare Inside Rear View Mirror
1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror Normal position Anti-glare position Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and the reflected light is automatically reduced.
Page 70 1-3. Adjustable components (seats, mirrors, steering wheel) To prevent sensor error To ensure that the sensors operate prop- erly, do not touch or cover them. CAUTION Caution while driving Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
Page 71: Outside Rear View Mirrors
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch. Select a mirror to adjust. STEP Left Right Adjust the mirror. STEP Right Down Left Folding back the mirrors Push backward to fold the mir- rors.
Page 72 1-3. Adjustable components (seats, mirrors, steering wheel) Mirror angle can be adjusted when The engine switch is in the “ACC” or “ON” position. When the mirrors are fogged up (vehicles with outside rear view mirror defoggers) Turn on the mirror defoggers to defog the mirrors. (→P. 168) CAUTION When driving the vehicle Observe the following precautions while driving.
Page 73 1-4. Opening and closing the windows Power windows (if equipped) The power windows can be opened and closed using the following switches. Closing Opening One-touch opening (driver’s window only) Pressing the switch in the opposite direction will stop win- dow travel partway. Lock switch Press the switch down to lock the passenger window switches.
Page 74 1-4. Opening and closing the windows CAUTION Closing the windows Observe the following precautions. Failing to do so may result in death or serious injury. Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a window is being operated.
Page 75: Opening And Closing The Windows
1-4. Opening and closing the windows Moon roof (if equipped) Use the overhead switches to open, close, and tilt the moon roof up and down. Opening and closing Open* The moon roof stops slightly before the fully opened posi- tion. Push the switch again to fully open.
Page 76 1-4. Opening and closing the windows The moon roof can be operated when The engine switch is in the “ON” position. Operating the moon roof after turning the engine OFF The moon roof can be operated for approximately 45 seconds after the engine switch is turned to the “ACC”...
Page 77 1-4. Opening and closing the windows CAUTION Opening the moon roof Observe the following precautions. Failing to do so may cause death or serious injury. Do not allow any passengers to put their hands or heads outside the vehi- cle while it is moving. Do not sit on top of the moon roof.
Page 78: Refueling
1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. Before refueling the vehicle Turn the engine switch OFF and ensure that all the doors and windows are closed. Opening the fuel tank cap Pull up the fuel filler door STEP opener.
Page 79 1-5. Refueling Closing the fuel tank cap When replacing the fuel tank cap, turn it until a clicking sound is heard. After releasing your hand, the cap will turn slightly to the opposite direction. Fuel type Unleaded gasoline (87 Octane rating [Research Octane Number 91] or higher) Fuel tank capacity 13.2 gal.
Page 80 This may cause static electricity to build up, resulting in a possible ignition hazard. When replacing the fuel cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 81 1-5. Refueling NOTICE Refueling Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle's painted surface.
Page 82: Theft Deterrent System
1-6. Theft deterrent system Engine immobilizer system The vehicle's keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle's on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. The indicator light flashes after the key has been removed from the engine switch to indi-...
Page 83 1-6. Theft deterrent system CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTICE To prevent damage to the key Do not modify, remove or disable the engine immobilizer system. If any unauthorized changes or modifications are made, the proper operation of the system cannot be guaranteed.
Page 84: Theft Prevention Labels (For U.s.a.)
1-6. Theft deterrent system Theft prevention labels (for U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law.
Page 85: Safety Information
1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. (→P. 35) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 86 1-7. Safety information CAUTION While driving Do not adjust the position of the driver's seat while driving. Doing so could cause the driver to lose control of the vehicle. Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
Page 87: Srs Airbags
1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags Driver airbag and front passenger airbag Can help protect the head and chest of the driver and front pas-...
Page 88 1-7. Safety information Airbag system components Front airbag sensors SRS warning light Front passenger occupant Front passenger’s seat belt classification system (ECU buckle switch and sensors) Airbag sensor assembly Side and curtain shield air- Curtain shield airbag sen- bag sensors (if equipped) sors (if equipped) Front passenger airbag Driver airbag...
Page 89 1-7. Safety information The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. The airbag sensor assembly consists of a safing sensor and an airbag sensor. In certain types of severe frontal or side impacts, the SRS airbag sys- tem triggers the airbag inflators.
Page 90 1-7. Safety information SRS warning light This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors (if equipped), curtain shield airbag sensors (if equipped), driver's seat position sensor, driver's seat belt buckle switch, front passenger occupant classification system, “AIR BAG ON”...
Page 91 1-7. Safety information Side airbags and curtain shield airbags (if equipped) The SRS side airbags and curtain shield airbags are designed to inflate when the passenger compartment is subjected to a severe impact from the side. Depending on the conditions and type of accident, there are times when the curtain shield airbags may deploy (inflate) in a front impact.
Page 92 1-7. Safety information Types of collisions that may not deploy the SRS side airbags and cur- tain shield airbags (if equipped) The SRS side airbags and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a col- lision to the side of the vehicle body other than the passenger compartment.
Page 93 1-7. Safety information When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. Do not disconnect the battery cables before contacting your Toyota dealer. Any of the SRS airbags have been inflated.
Page 94 1-7. Safety information CAUTION SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. The driver and all passengers in the vehicle must wear their seat belts properly. The SRS airbags are supplemental devices to be used with the seat belts. The SRS driver airbag deploys with considerable force, and can cause death or serious injury especially if the driver is very close to the airbag.
Page 95 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are the safest for infants and children.
Page 96 1-7. Safety information CAUTION SRS airbag precautions Do not allow a child to sit on the knees of a front passenger while the vehicle is moving. Do not drive the vehicle while the driver or passenger has items resting on their knees.
Page 97 1-7. Safety information CAUTION SRS airbag precautions Vehicles with side airbags and curtain shield airbags: Do not attach anything to areas such as the door, windshield glass, side door glass, front and rear pillars, roof side rail or assist grip. Curtain shield airbags: Do not hang coat hangers or other hard objects on the coat hooks.
Page 98 Vehicles with side and curtain shield airbags: If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. Vehicles without side and curtain shield airbags: If the areas where the SRS airbags are stored, such as the steering wheel pad are damaged or cracked, have them replaced by your Toyota dealer.
Page 99: Front Passenger Occupant Classification System
1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for the front passenger.
Page 100 1-7. Safety information Conditions and operation of the front passenger occupant classification system Adult “AIR BAG ON” and “AIR BAG OFF” indicator “AIR BAG lights ON” Indicator/ SRS warning light warning light Front passenger’s seat belt reminder light Flashing Front passenger airbag Side airbag on the front passenger seats (if equipped) Devices...
Page 101 1-7. Safety information Unoccupied “AIR BAG ON” and “AIR BAG OFF” indicator Not illuminated lights Indicator/ warning light SRS warning light Front passenger’s seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seats (if equipped) Devices Curtain shield airbag in the front Activated...
Page 102 1-7. Safety information : Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. (→P. 82) : In case the indicator is not illuminated, consult this manual as for installing the child restraint system properly.
Page 103 Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. Child restraint systems installed on the rear seat should not contact the front seatbacks.
Page 104: Child Restraint Systems
1-7. Safety information Child restraint systems A child restraint system for a small child or baby must be properly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of U.S.A. and Canada now require the use of child restraint systems.
Page 105 1-7. Safety information Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child. Infant seat Convertible seat Booster seat...
Page 106 In an accident, the child can be crushed against the windshield, or between you and the vehicle's interior. Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 107 1-7. Safety information CAUTION Child restraint precautions Never install a rear-facing child restraint system on the front passenger seat even if the “AIR BAG OFF” indicator light is illuminated. In the event of an accident, the force of the rapid inflation of the front passenger airbag can cause death or serious injury to the child if the rear-facing child restraint system is installed on the front passenger seat.
Page 108: Installing Child Restraints
1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the rear seats using a seat belt or a child restraint lower anchorage. Attach the top strap when installing a child restraint. Seat belts equipped with a child restraint locking mecha- nism (ALR/ELR belts except...
Page 109 1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear facing ⎯ Infant seat/convertible seat Place the child seat on the rear STEP seat facing the rear of the vehi- cle. Run the seat belt through the STEP child seat and insert the plate into the buckle.
Page 110 1-7. Safety information While pushing the child seat STEP down into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 111 1-7. Safety information While pushing the child seat into STEP the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 112 1-7. Safety information Removing a child restraint installed with a seat belt Push the release button and fully retract the seat belt. Installation with child restraint lower anchorages Type A STEP Widen the gap between the seat cushion and seatback slightly. STEP Latch the hooks of the lower straps onto the...
Page 113 1-7. Safety information Type B STEP Widen the gap between the seat cushion and seatback slightly. STEP Latch the buckles onto the anchors. If the child restraint has a top strap, the top strap should be latched onto the anchors. For owners in Canada: A symbol on a child restraint sys- tem indicates the presence of a...
Page 114 1-7. Safety information Child restraint systems with a top strap Secure the child restraint using STEP the seat belt lower anchors, and remove the head restraint. Open the anchor bracket cover, STEP latch the hook onto the anchor bracket and tighten the top strap. Make sure the top strap is securely latched.
Page 115 1-7. Safety information CAUTION When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALR lock mode: (→P. 42) ALR mode causes the belt to tighten only which could cause injury or dis- comfort to the child.
Page 116 1-7. Safety information CAUTION When installing a child restraint system When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child's shoulder. The belt should be kept away from the child's neck, but not so that it could fall off the child's shoulder.
Page 117: Driving Procedures
2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. Starting the engine →P. 106 Driving Automatic transmission STEP With the brake pedal depressed, shift the shift lever to D. (→P. 110) STEP Release the parking brake.
Page 118 2-1. Driving procedures Parking the vehicle Automatic transmission STEP With the shift lever in D, depress the brake pedal. STEP Set the parking brake. (→P. 118) STEP Shift the shift lever to P. (→P. 110) When parking on a hill, if necessary, block the wheels. STEP Turn the engine switch to the “LOCK”...
Page 119 Breaking in your new Toyota To extend the life of the vehicle, the following precautions are recommended...
Page 120 Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodically or when- ever the parking brake shoes and/or drum are replaced. Have your Toyota dealer perform the bedding down.
Page 121 Large amounts of exhaust in the vehi- cle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately. Do not under any circumstances shift the shift lever to P (vehicles with an automatic transmission) or R while the vehicle is moving.
Page 122 2-1. Driving procedures CAUTION Do not drive the vehicle off-road. This is not a AWD vehicle designed for real off-road driving. Proceed with all due caution if it becomes unavoidable to drive off-road. Do not drive across river crossings or through other bodies of water. This may cause electric/electronic components to short circuit, damage the engine or cause other serious damage to the vehicle.
Page 123 The exhaust should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in...
Page 124 2-1. Driving procedures CAUTION When taking a nap in the vehicle Always turn the engine off. Otherwise, you may accidentally move the shift lever or depress the accelerator pedal, which could cause an accident or fire due to engine overheating. Additionally, if the vehicle is parked in a poorly ventilated area, exhaust gases may collect and enter the vehicle, leading to death or a serious health hazard.
Page 125 2-1. Driving procedures NOTICE When driving the vehicle Manual transmission Do not shift gears unless the clutch pedal is fully depressed. After shifting, do not release the clutch abruptly. Doing so may damage the clutch, tran- saxle and gears. Do not rest your foot on the clutch pedal while driving. Doing so may cause clutch trouble.
Page 126 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage can result if the pads are not replaced when needed.
Page 127: Engine (Ignition) Switch
2-1. Driving procedures Engine (ignition) switch Starting the engine Automatic transmission STEP Check that the parking brake is set. STEP Check that the shift lever is set in P. STEP Sit in the driver’s seat and firmly depress the brake pedal. STEP Turn the engine switch to the “START”...
Page 128 2-1. Driving procedures Changing engine switch position “LOCK” The steering wheel is locked and the key can be removed. “ACC” Some electrical components such as the audio system can be used. “ON” All electrical components can be used. “START” For starting the engine.
Page 129 2-1. Driving procedures Turning the engine switch from “ACC” to “LOCK” STEP Shift the shift lever to P (auto- matic transmission) or N (man- ual transmission). (→P. 110, 115) STEP Push in the key and turn to the “LOCK” position. Steering lock release When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 130 2-1. Driving procedures NOTICE To prevent battery discharge Do not leave the key in the “ACC” or “ON” position for long periods if the engine is not running. When starting the engine 2.4 L 4-cylinder (2AZ-FE) engine ⎯ Do not crank for more than 30 sec- onds at a time.
Page 131: Automatic Transmission
2-1. Driving procedures Automatic transmission (if equipped) Select a shift position appropriate for the driving conditions. Shifting the shift lever Standard type Multi-mode type While the engine switch is in the “ON” position, depress the brake pedal and move the shift lever.
Page 132 2-1. Driving procedures Shift position uses Function Shift position Standard type Multi-mode type Parking the vehicle or starting the engine Reversing Neutral Normal driving S mode driving (→P. 112) Position for engine braking Position for more powerful engine braking Position for maximum engine braking : To improve fuel consumption and reduce noises, set the shift lever in the D position for normal driving.
Page 133 2-1. Driving procedures Changing shift ranges in S mode (multi-mode type) Shift the shift lever to the S position and operate the shift lever. Upshifting Downshifting The initial shift range in S mode is automatically set to 4 or 5.
Page 134 2-1. Driving procedures Shift ranges and their functions Shift range Function A gear between 1 and 5 is automatically selected according to vehicle speed and driving conditions. A gear between 1 and 4 is automatically selected according to vehicle speed and driving conditions. A gear between 1 and 3 is automatically selected according to vehicle speed and driving conditions.
Page 135 If the “S” indicator does not come on even after shifting the shift lever to S (multi-mode type) This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the vehicle will operate as if the shift lever is in D.)
Page 136: Manual Transmission
2-1. Driving procedures Manual transmission (if equipped) Shifting the shift lever Fully depress the clutch pedal before operating shift lever, and then release the clutch pedal slowly.
Page 137 2-1. Driving procedures Maximum allowable speeds Observe the following maximum allowable speeds in each gear when maxi- mum acceleration is necessary. 2.4 L 4-cylinder (2AZ-FE) engine (without double wishbone rear suspen- sion) mph (km/h) Shift position Maximum speed 31 (50) 53 (86) 82 (132) 112 (181)
Page 138: Turn Signal Lever
2-1. Driving procedures Turn signal lever Left turn Right turn Move and hold the lever partway to signal a lane change. The left hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change.
Page 139: Parking Brake
2-1. Driving procedures Parking brake Sets the parking brake Fully set the parking brake U.S.A. Canada while depressing the brake pedal. Releases the parking brake Slightly raise the lever and lower it completely while press- ing the button. NOTICE Before driving Fully release the parking brake.
Page 140: Instrument Cluster
2-2. Instrument cluster Gauges and meters The following gauges, meters and displays illuminate when the engine switch is in the “ON” position. Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining in the tank. Outside temperature display Displays the outside air temperature.
Page 141 2-2. Instrument cluster Engine coolant temperature gauge Displays the engine coolant temperature. Automatic transmission shift position indicator lights (if equipped) →P. 110 Odometer and trip meter Odometer: Displays the total distance the vehicle has been driven. Trip meter: Displays the distance the vehicle has been driven since the meter was last reset.
Page 142 2-2. Instrument cluster Instrument panel light control The brightness of the instrument panel lights can be adjusted. Darker Brighter When the headlight switch is turned on, the brightness will be reduced slightly unless the control button is turned fully clockwise. NOTICE To prevent damage to the engine and its components Do not let the indicator needle of the tachometer enter the red zone, which...
Page 143: Indicators And Warning Lights
2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster Center panel...
Page 144 2-2. Instrument cluster Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Headlight indicator (→P. 117) (→P. 125) (U.S.A.) Headlight high beam Tail light indicator indicator (→P. 126) (→P. 125) (Canada) Slip indicator Front fog light indicator (→P.
Page 145 Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Page 146: Operating The Lights And Wipers
2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually. side marker, parking, tail, license plate and instrument U.S.A. Canada panel lights turn on. The headlights and all lights listed above turn on.
Page 147 2-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. Pull the lever toward you to turn on the high beams.
Page 148 2-3. Operating the lights and wipers Light reminder buzzer A buzzer sounds when the engine switch is turned OFF and the driver's door is opened with the key removed from the engine switch while the lights are turned on. NOTICE To prevent battery discharge Do not leave the lights on longer than necessary when the engine is not run- ning.
Page 149: Fog Light Switch
2-3. Operating the lights and wipers Fog light switch (if equipped) The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on low beam. Front fog lights on...
Page 150: Windshield Wipers And Washer
2-3. Operating the lights and wipers Windshield wipers and washer Wiper can be operated manually. Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Wash/wipe operation Wipers operate automatically.
Page 151 2-3. Operating the lights and wipers The windshield wipers and washers can be operated when The engine switch is in the “ON” position. Intermittent windshield wiper interval mode (if equipped) Wiper intervals can be adjusted for intermittent operation. Decreases the intermittent windshield wiper frequency Increases the intermittent windshield wiper frequency...
Page 152: Rear Window Wiper And Washer
2-3. Operating the lights and wipers Rear window wiper and washer (if equipped) Intermittent window wiper operation Normal window wiper oper- ation Washer/wiper dual opera- tion Wiper operate automatically. Washer/wiper dual opera- tion Wiper operate automatically. The rear window wiper and washer can be operated when The engine switch is in “ON”.
Page 153: Using Other Driving Systems
2-4. Using other driving systems Cruise control (if equipped) Use cruise control to maintain a set speed without using the acceler- ator. Setting the vehicle speed STEP Press the “ON-OFF” button to activate the cruise control. Press the button once more to deactivate the cruise control.
Page 154 2-4. Using other driving systems Canceling and resuming regular acceleration Cancel Pull the lever towards you to cancel cruise control. The speed setting is also can- celed when the brakes are applied or the clutch pedal (manual transmission) depressed. Resume To resume cruise control and return to the set speed, push the lever up.
Page 155 If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Contact your Toyota dealer and have your Toyota inspected. CAUTION To avoid operating the cruise control by mistake Keep the “ON-OFF”...
Page 156: Driving Assist Systems
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ABS (Anti-lock Brake System) Restrains the vehicle from slipping when driving on slick road surfaces or in the event of sudden braking.
Page 157 2-4. Using other driving systems When VSC and TRAC are operating If the vehicle is in danger of slip- ping or the front wheels (2WD), or 4 wheels (AWD) spin, the indi- cator flashes to indicate that VSC/TRAC have been engaged. A buzzer (intermittent) sounds to indicate that VSC is operating.
Page 158 • The brake pedal may pulsate slightly after ABS is activated. • The brake pedal may move down slightly after ABS is activated. If the “VSC OFF” indicator light flashes There is a malfunction in the TRAC and VSC systems. Contact your Toyota dealer and have your Toyota inspected.
Page 159 2-4. Using other driving systems EPS operation sound When the steering wheel operates, a motor sound (whirring sound) may be heard. This does not indicate a malfunction. Reduced effectiveness of EPS The effectiveness of EPS is reduced to prevent the system from overheating when there is frequent steering input over an extended period of time.
Page 160 The ABS and VSC systems will not function correctly if different tires are fit- ted on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. Handling of tires and suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause the system to malfunction.
Page 161: Driving Information
2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. l Stow cargo and luggage in the luggage compartment whenever possible. Be sure all items are secured in place. l Be careful to keep the vehicle level. Placing the weight as far for- ward as possible helps maintain vehicle balance.
Page 162 2-5. Driving information (6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. (→P. 148) Example on your vehicle Cargo capacity Total load capacity...
Page 163 2-5. Driving information CAUTION Storage precautions To prevent cargo and luggage from sliding forward during braking, do not stack anything in the luggage compartment. Keep cargo and lug- gage low, as close to the floor as possible. Never allow anyone to ride in the luggage compartment. It is not designed for passengers.
Page 164: Vehicle Load Limits
2-5. Driving information Vehicle load limits Vehicle load limits include total load capacity, seating capacity, towing capacity and cargo capacity. Total load capacity: 850 lb. (385 kg) Total load capacity means the combined weight of occupants, cargo and luggage. Seating capacity: 5 occupants (Front 2, Rear 3) Seating capacity means the maximum number of occupants whose estimated average weight is 150 lb.
Page 165: Winter Driving Tips
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. Pre-winter preparations l Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 166 2-5. Driving information When driving the vehicle Accelerate the vehicle slowly and drive at a reduced speed suit- able to road conditions. When parking the vehicle Park the vehicle and move the shift lever to P (automatic trans- mission), 1 or R (manual transmission) without setting the park- ing brake.
Page 167 2-5. Driving information Snow chain installation (vehicles with 16-inch and 17-inch tires) Observe the following precautions when installing and removing chains. Install and remove tire chains in a safe location. Install tire chains on the front tires only. Do not install tire chains on rear tires.
Page 168 2-5. Driving information NOTICE Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota dealers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 169: Trailer Towing
For your safety and the safety of others, do not overload the vehicle or trailer. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Weight limits Confirm that the total trailer weight, gross vehicle weight, gross axle weight and trailer tongue load are all within the limits.
Page 170 Total trailer weight Tongue load Towing a trailer Contact your Toyota dealer for further information about additional requirements such as a towing kit, etc. Hitch Trailer hitch assemblies have different weight capacities established by the hitch manufacturer.
Page 171 Break-in schedule Toyota recommends that you do not use a new vehicle or a vehicle with any new power train components (engine, transmission, differential, wheel bear- ings, etc.) to tow a trailer for the first 500 miles (800 km) of driving.
Page 172 When towing a trailer If the gross trailer weight exceeds 1500 lb. (680 kg), trailer brakes are required. Toyota recommends trailers with brakes that conform to all appli- cable federal and state/provincial regulations. Never tap into your vehicle's hydraulic system, as this will lower the vehi- cle's braking effectiveness.
Page 173 NOTICE When installing a trailer hitch Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. Do not use axle-mounted hitches, as they can cause damage to the axle housing, wheel bearings, wheels or tires.
Page 174 2-5. Driving information l Reversing with a trailer attached is difficult and requires practice. Grip the bottom of the steering wheel and move your hand to the left to move the trailer to the left. Move your hand to the right to move the trailer to right.
Page 175 2-5. Driving information l In order to maintain efficient engine braking and electrical charging performance, do not use overdrive (automatic transmission) or the 5th gear (manual transmission). l Due to the added load of the trailer, your vehicle's engine may overheat on hot days (at temperatures over 85°F [30°C]) when driving up a long or steep grade.
Page 176 2-5. Driving information CAUTION To avoid an accident Do not exceed 45 mph (72 km/h) or posted towing speed limit, whichever is lower. As instability (swaying) of the towing vehicle-trailer combination increases as speed increases, exceeding 45 mph (72 km/h) may cause loss of control.
Page 177: Dinghy Towing (Automatic Transmission)
2-5. Driving information Dinghy towing (automatic transmission) Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground.
Page 178: Dinghy Towing (Manual Transmission)
2-5. Driving information Dinghy towing (manual transmission) Your vehicle can be dinghy towed in a forward direction (with 4 wheels on the ground) behind a motor home. Towing your vehicle with 4 wheels on the ground To prevent damage to your vehicle, perform the following procedures before towing.
Page 179 2-5. Driving information NOTICE Dinghy towing direction Do not tow the vehicle backwards. Doing so may cause serious damage. To prevent the steering from locking Ensure the engine switch is in the “ACC” position.
Page 180 2-5. Driving information...
Page 181: Using The Air Conditioning System And Defogger
3-1. Using the air conditioning system and defogger Air conditioning system Heater Air outlet selection dial Temperature control dial Fan speed control dial Air intake mode switch Air conditioning system Air outlet selection dial Temperature control dial Fan speed control dial Air intake mode switch Air conditioning ON/OFF switch...
Page 182 3-1. Using the air conditioning system and defogger Adjusting the settings Adjusting the temperature setting (heater) Turn the temperature control dial clockwise to increase the temper- ature. Adjusting the temperature setting (air conditioning system) Turn the temperature control dial clockwise (warm) or counter- clockwise (cool).
Page 183 3-1. Using the air conditioning system and defogger Air flows to the upper body and feet. : Some models Mainly air flows to the feet. : Some models Air flows to the feet and the windshield defogger operates. The air intake is automatically switched to outside air mode.
Page 184 3-1. Using the air conditioning system and defogger Air flows to the windshield and side windows. The air intake is automatically switched to outside air mode. It is not possible to return to recircu- lated air mode when the switch is Switching air intake modes Press The mode switches between outside air mode (indicator off) and recircu-...
Page 185 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Adjusting the position Direct air flow to the left or right, up or down. Opening and closing Open the vent. Close the vent.
Page 186 3-1. Using the air conditioning system and defogger For quick cooling (vehicles with air conditioning system) Turn the temperature control dial to the “MAX A/C” position and select the recirculated air mode. For quick clearing of the windshield and side windows (vehicles with air conditioning system) Press to turn the air conditioning on.
Page 187: Rear Window And Outside Rear View Mirror Defoggers
3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers Clear the rear window using the defogger. On/off Outside rear view mirror defogger (if equipped) Turning the rear window defogger on will turn the outside rear view mirror defoggers on.
Page 188: Using The Audio System
3-2. Using the audio system Audio system types With navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. Without navigation system Type A: CD player with CD changer controller and AM/FM radio Type B: CD player with changer and AM/FM radio...
Page 189 3-2. Using the audio system Title Page Using the radio P. 172 Using the CD player P. 178 Playing MP3 and WMA discs P. 185 Optimal use of the audio system P. 193 Using the AUX adapter P. 196 Using the steering wheel audio switches P.
Page 190 3-2. Using the audio system NOTICE To prevent battery discharge Do not leave the audio system on longer than necessary with the engine off. To avoid damaging the audio system Take care not to spill drinks or other fluids over the audio system.
Page 191: Using The Radio
3-2. Using the audio system Using the radio Power Volume Adjusting frequency (AM, FM mode) or channel (SAT mode) Station selector Displaying radio Scanning for AM⋅SAT/FM text messages receivable stations mode buttons Changing the channel Seeking the frequency ® Setting station presets (excluding XM Satellite Radio) ∧...
Page 192 3-2. Using the audio system Scanning all radio stations within range STEP Press All stations with reception will be played for 5 seconds each. STEP When the desired station is reached, press once again. ® Satellite Radio* (if equipped) ® Receiving XM Satellite Radio STEP...
Page 193 The display changes as follows each time the button is pressed. l CH NAME l TITLE (SONG/PROGRAM TITLE) l NAME (ARTIST NAME/FEATURE) l CH NUMBER *: Except JBL brand audio system⎯ ® ® Use of XM Satellite Radio requires XM tuner and service. Contact your Toyota dealer.
Page 194 3-2. Using the audio system When the battery is disconnected Station presets are erased. Reception sensitivity Cargo loaded on the roof luggage carrier, especially metal objects, may ® adversely affect the reception of XM Satellite Radio. Maintaining perfect radio reception at all times is difficult due to the con- tinually changing position of the antenna, differences in signal strength and surrounding objects, such as trains, transmitters, etc.
Page 195 XM antenna cable is attached securely. ANTENNA There is a short-circuit in the antenna or the sur- rounding antenna cable. See a Toyota certified dealer. ® You have not subscribed to XM Satellite Radio. The radio is being updated with the latest encryp- ®...
Page 196 3-2. Using the audio system The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or “CH001”. If it does not change automatically, select another channel. ® Contact the XM Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada).
Page 197: Using The Cd Player
3-2. Using the audio system Using the CD player CD load Power Volume (type B only) Fast-forwarding a track CD eject Reversing a track Selecting a track Playback Searching Repeat play playback Displaying text Selecting a CD messages Random playback Loading CDs Loading a CD Type A...
Page 198 3-2. Using the audio system Loading multiple CDs (type B) STEP Press and hold until you hear a beep. STEP Insert a CD when the indicator on the slot turns from amber to green. The indicator on the slot turns to amber when the CD is inserted. STEP Insert the next CD when the indicator on the slot turns from amber to green again.
Page 199 3-2. Using the audio system Fast-forwarding and reversing tracks To fast-forward or reverse, press (reverse) or (fast-for- ward). Scanning tracks STEP Press The first ten seconds of each track will be played. STEP Press again when the desired track is reached. Selecting a CD (type A with a CD changer and type B) To select a CD to play To select the desired CD, press...
Page 200 3-2. Using the audio system Random playback Current CD Press (RAND). Tracks are played in a random order until is pressed once more. All CDs (type A with a CD changer and type B) Press and hold (RAND) until you hear a beep. Tracks on all loaded CDs are played in a random order until pressed once more.
Page 201 Operation has stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played back. Discs that can be used Discs with the marks shown below can be used.
Page 202 3-2. Using the audio system NOTICE CDs that cannot be used Do not use the following types of CDs or Dual Discs. Doing so may damage the CD player and/or the CD insert/eject function. Type A: CDs that have a diameter other than 4.7 in.
Page 203 3-2. Using the audio system NOTICE CD player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself. Do not insert anything other than CDs into the CD slot. Do not apply oil to the CD player. Store CDs away from direct sunlight.
Page 204: Playing Mp3 And Wma Discs
3-2. Using the audio system Playing MP3 and WMA discs Power Volume Selecting a file CD load (type B only) CD eject Selecting a CD Fast-for- warding a Selecting file a file Selecting a folder Searching playback Repeat play Playback Displaying text messages Random playback...
Page 205 3-2. Using the audio system Selecting and scanning a folder Selecting folders one at a time Press “∧” or “∨” on to select the desired folder. Selecting the desired folder by cueing the first file of each folder Press and hold until you hear a beep.
Page 206 3-2. Using the audio system Repeat play To repeat a file Press (RPT). To repeat all of the files in a folder Press and hold (RPT) until you hear a beep. Random playback To play files from a particular folder in random order Press (RAND).
Page 207 Operation has stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played. “NO MUSIC”: This indicates that the MP3/WMA file is not included in the Discs that can be used Discs with the marks shown below can be used.
Page 208 3-2. Using the audio system MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 209 3-2. Using the audio system Compatible media Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.
Page 210 3-2. Using the audio system ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title and artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver.
Page 211 3-2. Using the audio system NOTICE CDs that cannot be used (→P. 183) CD player precautions (→P. 184)
Page 212: Optimal Use Of The Audio System
3-2. Using the audio system Optimal use of the audio system Displays the current mode Changes the following set- tings • Sound quality and volume balance (→P. 194) The sound quality and bal- ance setting can be changed to produce the best sound. •...
Page 213 3-2. Using the audio system Adjusting sound quality Turning adjusts the level. Mode Sound qual- Turn to the Turn to the Level displayed ity mode left right Bass -5 to 5 Mid- *1,*2 -5 to 5 High range Treble -5 to 5 Front/rear Shifts to volume...
Page 214 3-2. Using the audio system JBL brand audio system When “ASL” is selected, turning to the right turns “ASL” on, and turning to the left turns “ASL” off. ASL automatically adjusts the volume and tone quality according to vehi- cle speed. Trademark owned by SRS Labs, Inc.
Page 215: Using The Aux Adapter
3-2. Using the audio system Using the AUX adapter This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. Open the cover and connect STEP the portable audio device. Press STEP Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle's audio controls.
Page 216: Using The Steering Wheel Audio Switches
3-2. Using the audio system Using the steering wheel audio switches (if equipped) Some audio features can be controlled using the switches on the steering wheel. Volume Radio: Select radio stations Select tracks, files (MP3 and WMA) and discs Power on/off, select audio source Turning on the power Press...
Page 217 ® ® Use of XM Satellite Radio requires XM tuner and service. Contact your Toyota dealer. Adjusting the volume Press “+” on to increase the volume and “-” to decrease the volume. Press and hold the switch to continue increasing or decreasing the vol- ume.
Page 218 3-2. Using the audio system Selecting a track/file STEP Press to select the CD mode. STEP Press to select the desired track/file. Selecting a folder (type A) STEP Press to select the CD mode. STEP Press and hold until you hear a beep. Selecting a disc (type A with a CD changer and type B) STEP Press...
Page 219 3-3. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features (if equipped) ® This system supports Bluetooth , which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone.
Page 220: Using The Hands-Free Phone System (For Cellular Phone)
3-3. Using the hands-free phone system (for cellular phone) Trademark owned by Bluetooth SIG. Inc. Certification for the hands-free phone system FCC ID: ACJ932C5ZZZ035 IC ID: 216J-C5ZZZ035 MADE IN JAPAN NOTE: This device complies with Part 15 of the FCC Rules and RSS-210 of industry Canada.
Page 221: Using The Hands-Free Phone System (For Cellular Phone)
3-3. Using the hands-free phone system (for cellular phone) FCC WARNING: Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.
Page 222 3-3. Using the hands-free phone system (for cellular phone) Using the hands-free phone system (for cellular phone) (if equipped) Audio unit Displays such items as message, name, and phone number Lower-case characters and special characters, such as an umlaut, can- not be displayed.
Page 223: Using The Hands-Free Phone System (For Cellular Phone)
3-3. Using the hands-free phone system (for cellular phone) Steering wheel Volume The voice guidance volume cannot be adjusted by using this button. Hands-free phone system on/starts a call (off-hook switch) Hands-free phone system off/ends a call/refuses a call (on-hook switch) Press: Voice command sys- tem on Press and hold: Voice com-...
Page 224 3-3. Using the hands-free phone system (for cellular phone) Microphone Vehicles with moon roof Vehicles without moon roof...
Page 225 3-3. Using the hands-free phone system (for cellular phone) Operating the system by using a voice command By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the hands- free phone system without checking the display or operating Operation procedure when using a voice command Press the talk switch and say the command for a desired function.
Page 226 3-3. Using the hands-free phone system (for cellular phone) Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered.
Page 227 3-3. Using the hands-free phone system (for cellular phone) Menu list of the hands-free phone system Normal operation Second First menu Third menu Operation detail menu Dialing a number stored in Callback the incoming call history memory Dialing a number stored in Redial the outgoing call history memory...
Page 228 3-3. Using the hands-free phone system (for cellular phone) Second First menu Third menu Operation detail menu Set PIN Setting a PIN code Phonebook Lock Locking the phone book Security Phonebook Unlocking the phone book Unlock Registering the cellular Pair Phone phone to be used Changing a registered name Change Name...
Page 229 3-3. Using the hands-free phone system (for cellular phone) Using a short cut key First menu Second menu Operation detail Dialing a number registered Dial “XXX (name)” in the phone book Phone book add Adding a new number entry Changing the name of a Phone book change phone number in the phone name...
Page 230 3-3. Using the hands-free phone system (for cellular phone) Automatic adjustment of volume When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less. When using a voice command For numbers, say a combination of single digits from zero to nine, # (pound), ∗...
Page 231: Making A Phone Call
3-3. Using the hands-free phone system (for cellular phone) Making a phone call Making a phone call l Dialing by inputting a number “Dial by number” l Dialing by inputting a name “Dial by name” l Speed dialing l Dialing a number stored in the outgoing history memory “Redial”...
Page 232 3-3. Using the hands-free phone system (for cellular phone) Dialing by inputting a name STEP Press the talk switch and say “Dial by name”. STEP Select a registered name to be input by either of the following methods: a. Press the talk switch and say a registered name. b.
Page 233 3-3. Using the hands-free phone system (for cellular phone) Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow- ing methods: a. Operate the cellular phone. Refer to the manual that comes with the cellular phone for the oper- ation of the phone.
Page 234 3-3. Using the hands-free phone system (for cellular phone) The following operations can be performed: Dialing: Press the off-hook switch or select “Dial” by using a voice command or Storing the number in the phone book: Select “Store” by using a voice command or Deleting: Select “Delete”...
Page 235: Setting A Cellular Phone
3-3. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: Functions and operation procedures To enter the menu for each function, follow the steps below by using a voice command or l Registering a cellular phone...
Page 236 3-3. Using the hands-free phone system (for cellular phone) Selecting the cellular phone to be used STEP Select “Select Phone” by using a voice command or Pattern A STEP Select the cellular phone to be used by either of the following methods, and select “Confirm”...
Page 237 3-3. Using the hands-free phone system (for cellular phone) STEP Press the talk switch or select “Record Name” by using and say a new name. STEP Select “Confirm” by using a voice command or Listing the registered cellular phones Selecting “List Phones” by using a voice command or causes the list of registered cellular phones to be read aloud.
Page 238 3-3. Using the hands-free phone system (for cellular phone) Deleting a cellular phone STEP Select “Delete” by using a voice command or Pattern A STEP Select the cellular phone to be deleted by either of the follow- ing methods and select “Confirm” by using a voice command a.
Page 239 3-3. Using the hands-free phone system (for cellular phone) Changing the passkey STEP Select “Set Passkey” by using a voice command or Pattern A STEP Press the talk switch, say a 4 to 8-digit number, and select “Confirm” by using a voice command or Pattern B STEP Select a 4 to 8-digit number by using...
Page 240: Security And System Setup
3-3. Using the hands-free phone system (for cellular phone) Security and system setup To enter the menu of each setting, follow the steps below: Security setting items and operation procedure l Setting or changing the PIN (Personal Identification Number) 1. “Setup” → 2. “Security” → 3. “Set PIN” l Locking the phone book 1.
Page 241 3-3. Using the hands-free phone system (for cellular phone) Changing the PIN STEP Select “Set PIN” by using a voice command or STEP Enter the registered PIN by using a voice command or STEP Enter a new PIN by using a voice command or When using , input the code 1 digit at a time.
Page 242 3-3. Using the hands-free phone system (for cellular phone) Setting voice guidance volume STEP Select “Guidance Vol” by using STEP Change the voice guidance volume. To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Initialization STEP Select “Initialize” and then “Confirm” by using STEP Select “Confirm”...
Page 243: Using The Phone Book
3-3. Using the hands-free phone system (for cellular phone) Initialization The following data in the system can be initialized: • Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code Once the initialization has been completed, the data cannot be restored to its original state.
Page 244: Using The Phone Book
3-3. Using the hands-free phone system (for cellular phone) Using the phone book To enter the menu of each setting, follow the steps below: l Adding a new phone number 1. “Phonebook” → 2. “Add Entry” l Setting speed dial 1.
Page 245 3-3. Using the hands-free phone system (for cellular phone) Adding procedure STEP Select “Add Entry” by using a voice command or STEP Use one of the following methods to input a telephone num- ber: Inputting a telephone number by using a voice command STEP2-1 Select “By Voice”...
Page 246 3-3. Using the hands-free phone system (for cellular phone) Inputting a phone number by using STEP2-1 Select “Manual Input” by using STEP2-2 Input a phone number by using , and press once again. Input the phone number 1 digit at a time. Selecting a phone number from outgoing or incoming call history STEP2-1 Select “Call History”...
Page 247 3-3. Using the hands-free phone system (for cellular phone) STEP Select the name to be registered by either of the following methods, and select “Confirm” by using a voice command or a. Press the talk switch and say the desired name. b.
Page 248 3-3. Using the hands-free phone system (for cellular phone) STEP Select the desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” by using a voice command or b.
Page 249 3-3. Using the hands-free phone system (for cellular phone) Deleting registered data STEP Select “Delete Entry” by using a voice command or Pattern A STEP Select the data to be deleted by either of the following meth- ods, and select “Confirm” by using a voice command or a.
Page 250 3-3. Using the hands-free phone system (for cellular phone) Listing the registered data Selecting “List names” by using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”. Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will be available.
Page 251: Using The Interior Lights
3-4. Using the interior lights Interior lights list Personal/interior lights or personal lights (→P. 234, 235) Interior lights (→P. 233)
Page 252: Interior Light
“DOOR” position, the lights will go off automatically after 20 minutes. Customization that can be configured at Toyota dealer Settings (e.g. The time elapsed before lights turn off) can be changed.
Page 253: Personal/Interior Lights
3-4. Using the interior lights Personal/interior lights Personal/interior lights (vehicles with moon roof) Interior lights “DOOR” position Personal lights On/off...
Page 254: Personal Lights
3-4. Using the interior lights Personal lights Personal lights (vehicles without moon roof) On/off...
Page 255: Using The Storage Features
3-5. Using the storage features List of storage features Auxiliary boxes Glove box Bottle holders Cup holders Console box...
Page 256: Glove Box
3-5. Using the storage features Glove box and console box Glove box Pull up the lever. CAUTION Caution while driving Keep the glove box closed. Injuries may result in the event of an accident or sudden braking. Console box Type A Lift the lid while pulling the lever.
Page 257 3-5. Using the storage features Console box Type B (upper) Lift the lid while pulling the lever. Type B (lower) Lift the lid and tray while pulling the lever. CAUTION Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 258: Cup Holders
3-5. Using the storage features Cup holders Cup holders Front Rear Pull the lid to open. Using the cup holder (front) to store small items Remove the holders.
Page 259 3-5. Using the storage features Cup holders Adjusting the cup holder to the size of the cups or drink-cans Remove the holder and change the holder position. Small size Middle size Large size CAUTION Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders.
Page 260: Bottle Holders
3-5. Using the storage features Bottle holders Bottle holders Front Rear CAUTION Items unsuitable for the bottle holder Do not place anything other than pet bottles in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 261: Auxiliary Boxes
3-5. Using the storage features Bottle holders and auxiliary boxes NOTICE When a pet bottle is in the front bottle holder (vehicles with manual window) As there is a possibility of interfering with a manual window regulator handle, pre- vent the window from opening and clos- ing, do not place a pet bottle in the holder when turning the handle.
Page 262 3-5. Using the storage features Auxiliary boxes CAUTION Caution while driving Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking. Items that should not be left in the overhead console Do not leave glasses or lighters in the console. If the interior of the vehicle becomes hot, lighters may explode and glasses may warp or become cracked.
Page 263: Other Interior Features
3-6. Other interior features Sun visors Forward position: Flip down. Side position: Flip down, unhook, and swing to the side.
Page 264: Vanity Mirrors
3-6. Other interior features Vanity mirrors Slide the cover.
Page 265: Clock
3-6. Other interior features Clock Adjusts the hour. Adjusts the minutes. Rounds nearest hour.* *: e.g. 1:00 to 1:29 → 1:00 1:30 to 1:59 → 2:00 The clock is displayed when The engine switch is in the “ACC” or “ON” position.
Page 266: Ashtrays
3-6. Other interior features Ashtrays (if equipped) An ashtray can be installed in a cup holder. CAUTION When not in use Keep the ashtray closed. Injuries may result in the event of an accident or sudden braking. To prevent fire Fully extinguish matches and cigarettes before putting them in the ashtray, then make sure the ashtray is fully closed.
Page 267: Cigarette Lighter
3-6. Other interior features Cigarette lighter (if equipped) Push cigarette lighter down. The cigarette lighter will pop up when it is ready for use. The cigarette lighter can be used when The engine switch is in the “ACC” or “ON” position. CAUTION To avoid burns or fires Do not touch the metal parts of the cigarette lighter.
Page 268: Power Outlet
3-6. Other interior features Power outlet (if equipped) The power outlet can be used for a following component. 12 V: Accessories that run on less than 10 A. 115 V: Accessories that uses less than 100 W. Type A (12 V) Type B (115 V) Main switch To use the power outlet,...
Page 269 3-6. Other interior features NOTICE To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit. To prevent the fuse from being blown 12 V Do not use an accessory that uses more than 12 V 10 A.
Page 270: Grocery Bag Hook
3-6. Other interior features Grocery bag hook This hook is designed to hang things like grocery bag. Cabin Press the hook. Luggage compartment...
Page 271 3-6. Other interior features NOTICE Grocery bag hook weight capacity Cabin Do not hang any object heavier than 44 lb. (20 kg) on the grocery bag hook. Luggage compartment Do not hang any object heavier than 7 lb. (3 kg) on the grocery bag hooks.
Page 272: Seatback Table
3-6. Other interior features Seatback table (if equipped) Front passenger's seatback can be used as a temporary table only when the vehicle is stopped. Fold down the front passen- ger's seat to use the seatback table. (→P. 35) CAUTION Caution while driving Observe the following precautions to avoid death or serious injury.
Page 273: Floor Mat
3-6. Other interior features Floor mat Securely place a mat that matches the size of the space on the car- pet. Secure the driver's floor mat using the hooks provided. CAUTION When inserting the floor mat Observe the following precautions. Failure to do so may result in the floor mat slipping and interfering with the movement of the pedals during driving, resulting in an accident.
Page 274: Luggage Compartment Feature
3-6. Other interior features Luggage compartment feature Cargo hooks Cargo hooks are provided for securing loose items. Tie-down belts To tighten To loosen To hook To unhook...
Page 275 3-6. Other interior features Auxiliary boxes Turn knobs “UNLOCK” position, remove the deck boards.
Page 276 3-6. Other interior features Grocery bag hooks (→P. 251) Tonneau cover (if equipped) Remove the deck board. STEP Take out the bag. STEP Remove the tonneau cover STEP from the bag.
Page 277 3-6. Other interior features Slowly unfold the tonneau STEP cover. Attach the hook to the hook STEP brackets. Raise the rear center head STEP restraint to attach the hook.
Page 278 3-6. Other interior features Folding the tonneau cover Hold the tonneau cover with both STEP hands. Point your thumbs in opposite directions. Bend one side of the cover STEP towards you. Twist the other side in the oppo- STEP site direction, as shown in the illustration.
Page 279 3-6. Other interior features Make a small circle, then fold it STEP inward. Make sure the three circles are STEP side by side. Put it in the bag. STEP...
Page 280 3-6. Other interior features CAUTION When unfolding the tonneau cover Be careful not to hit yourself when unfolding the tonneau cover. Caution while driving Keep the deck boards locked. Injuries may result in the event of an accident or sudden braking.
Page 281: Compass
3-6. Other interior features Compass (if equipped) The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. Operation To turn the compass on or off, press and hold “AUTO” for 3 seconds. Displays and directions Display Direction North...
Page 282 3-6. Other interior features Calibrating the compass The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in the illustration, the compass will deviate.
Page 283 3-6. Other interior features Circling calibration STEP Stop the vehicle in a place where it is safe to drive in a circle. Press and hold “AUTO” for 9 STEP seconds. C appears on the compass dis- play. Drive the vehicle at 5 mph (8 STEP km/h) or less in a circle until a direction is displayed.
Page 284 3-6. Other interior features CAUTION While driving the vehicle Do not adjust the display. Be sure to adjust the display only when the vehicle is stopped. When doing the circling calibration Be sure to secure a wide space, and watch out for people and vehicles in the neighborhood.
Page 285 3-6. Other interior features...
Page 286: Maintenance And Care
4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. l Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 287 Do not use organic cleaners such as benzene or gasoline. If the windshield washer nozzle become blocked Contact your Toyota dealer. Do not try to clear it with a pin or other object. This may damage the nozzle. Cleaning the exterior lights Wash carefully.
Page 288: Cleaning And Protecting The Vehicle Interior
4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 289 Wipe the window in strokes running parallel to the heater wires. Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle's interior. Shampooing the carpets There are several commercial foaming-type cleaners available.
Page 290 4-1. Maintenance and care NOTICE Cleaning detergents Do not use organic substances such as benzene or gasoline, acidic or alka- line solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. Preventing damage to leather surfaces Observe the following precautions to avoid damage to and deterioration of leather surfaces.
Page 291: Maintenance
It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 292 4-2. Maintenance Allow inspection and repairs to be performed by a Toyota dealer Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.
Page 293: General Maintenance
Booklet” “Owner’s Manual Supplement/Scheduled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items Check points Check the connections. Battery (→P.
Page 294 4-2. Maintenance Vehicle interior Items Check points • Moves smoothly (without uneven Accelerator pedal pedal effort or catching)? • Can the vehicle be held securely Automatic transmission “Park” on an incline with the shift lever in mechanism • Moves smoothly? •...
Page 295 4-2. Maintenance Vehicle exterior Items Check points Doors • Operate smoothly? Engine hood • The lock system works properly? • Is there any leakage after park- Fluid leaks ing? • Inflation pressure is correct? • Tire surfaces not worn or dam- aged? Tires •...
Page 296: Emission Inspection And Maintenance (I/M) Programs
The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. Your vehicle may not pass the I/M test:...
Page 297: Do-It-Yourself Maintenance
Brake fluid level (→P. 297) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology.
Page 298 4-3. Do-it-yourself maintenance Items Parts and tools • Fuse with same amperage rating Fuses (→P. 323) as original Radiator and condenser ⎯ (→P. 296) • Tire pressure gauge Tire inflation pressure (→P. 312) • Compressed air source • Water washer fluid containing Washer fluid (→P.
Page 299 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury observe the following precautions. When working on the engine compartment Keep hands, clothing, and tools away from the moving fan and engine drive belt.
Page 300 4-3. Do-it-yourself maintenance NOTICE If you remove the air cleaner Driving with the air cleaner removed may cause excessive engine wear due to dirt in the air. Also, a backfire could cause a fire in the engine compart- ment.
Page 301: Hood
4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. STEP The hood will pop up slightly. Lift the auxiliary catch lever STEP and lift the hood. Hold the hood open by insert- STEP ing the supporting rod into the slot.
Page 302 4-3. Do-it-yourself maintenance CAUTION Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. After installing the support rod into the slot Make sure the rod supports the hood securely from falling down on to your head or body.
Page 303: Positioning A Floor Jack
4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. Front 1.8 L 4-cylinder (2ZR-FE) engine 2.4 L 4-cylinder (2AZ-FE) engine...
Page 304 4-3. Do-it-yourself maintenance Rear 2WD models without 18-inch tires 2WD models with 18-inch tires AWD models...
Page 305 4-3. Do-it-yourself maintenance CAUTION When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri- ous injury. Lift up the vehicle using a floor jack such as the one shown in the illustra- tion.
Page 306: Engine Compartment
4-3. Do-it-yourself maintenance Engine compartment 1.8 L 4-cylinder (2ZR-FE) engine Engine oil filler cap Battery (→P. 298) (→P. 291) Radiator (→P. 296) Engine oil level dipstick Electric cooling fan (→P. 290) Condenser (→P. 296) Brake fluid reservoir Engine coolant reservoir (→P.
Page 307 4-3. Do-it-yourself maintenance 2.4 L 4-cylinder (2AZ-FE) engine Engine coolant reservoir Fuse box (→P. 323) (→P. 295) Battery (→P. 298) Engine oil filler cap Radiator (→P. 296) (→P. 291) Electric cooling fans Engine oil level dipstick Condenser (→P. 296) (→P. 290) Washer fluid tank (→P.
Page 308 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil STEP Park the vehicle on level ground. After turning off the engine, wait a few minutes for the oil to drain back into the bottom of the engine.
Page 309 4-3. Do-it-yourself maintenance 2.4 L 4-cylinder (2AZ-FE) engine Full Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 310 4-3. Do-it-yourself maintenance STEP Install the filler cap, turning it clockwise. The approximate quantity of oil needed to raise the level between low and full on the dipstick is indicated as follows: 1.8 L 4-cylinder (2ZR-FE) engine 1.6 qt. (1.5 L, 1.3 Imp. qt.) 2.4 L 4-cylinder (2AZ-FE) engine 1.1 qt.
Page 311 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 312 4-3. Do-it-yourself maintenance NOTICE To prevent serious engine damage Check the oil level on a regular basis. When replacing the engine oil Be careful not to spill engine oil on the vehicle components. Avoid overfilling, as the engine could be damaged. Check the oil level on the dipstick every time you refill the vehicle.
Page 313 If the coolant level drops within a short time after replenishing Visually check the radiator, hoses, coolant reservoir cap, radiator cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system. Coolant selection Only use “Toyota Super Long Life Coolant”...
Page 314 Check the radiator and condenser and remove any foreign objects. If any of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Toyota dealer. CAUTION When the engine is hot Do not touch the radiator or condenser, as they may be hot and may cause burns.
Page 315 4-3. Do-it-yourself maintenance Brake fluid Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. Make sure to check the fluid type and prepare the necessary items. Adding fluid Fluid type FMVSS No.116 DOT 3 or SAE J1703 brake fluid Items Clean funnel Brake fluid can absorb moisture from the air...
Page 316 Ground cable Checking battery fluid Check the battery condition using the indicator color. Green: Good condition Dark: Charging is necessary. Have the vehicle inspected by your Toyota dealer. Clear or light yellow: Not working properly. Have the battery checked your...
Page 317 4-3. Do-it-yourself maintenance Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive. Therefore, before recharging: If recharging with the battery installed on the vehicle, be sure to discon- nect the ground cable. Make sure the power switch on the charger is off when connecting and disconnecting the charger cables to the battery.
Page 318 4-3. Do-it-yourself maintenance CAUTION Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: Do not cause sparks by touching the battery terminals with tools.
Page 319 4-3. Do-it-yourself maintenance NOTICE When recharging the battery Never recharge the battery while the engine is running. Also, be sure all accessories are turned off. Washer fluid For vehicles sold in U.S.A. If the washer fluid level is at “LOW” add washer fluid. For vehicles sold in Canada If any washer does not work or the low windshield washer fluid warn- ing light comes on, the washer tank may be empty.
Page 320 4-3. Do-it-yourself maintenance NOTICE Do not use any fluid other than washer fluid Do not use soapy water or engine antifreeze instead of washer fluid. Doing so may cause streaking on the vehicle’s painted surfaces. Diluting washer fluid Dilute washer fluid with water as necessary. Refer to the freezing temperatures listed on the washer fluid tank.
Page 321: Tires
The tire pressure warning system (if equipped) Your Toyota is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. (→P. 355) The compact spare tire is not equipped with the tire pressure warning valves and transmitters.
Page 322 ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer . (→P. 306)
Page 323 4-3. Do-it-yourself maintenance How to initialize the tire pressure warning system STEP Park the vehicle in a safe place and turn the engine switch OFF. While the vehicle is moving, initialization is not performed. STEP Adjust the tire inflation pressure to the specified cold tire infla- tion pressure level.
Page 324 A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly.
Page 325 If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. When operating the tire pressure warning reset switch, the tire pres- sure warning light does not flash 3 times.
Page 326 4-3. Do-it-yourself maintenance Tire types 1 Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.
Page 327 4-3. Do-it-yourself maintenance Tire pressure warning system certification For vehicles sold in the U.S.A. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 328 Do not mix tires of different makes, models, tread patterns or tread- wear. Do not use tire sizes other than those recommended by Toyota. Do not mix radial, bias-belted, or bias-ply tires. Do not mix summer, all season and winter tires.
Page 329 Repairing or replacing tires, wheels and tire pressure warning valves and transmitters When removing or fitting the wheels, tires or the tire pressure warning valves and transmitters, contact your Toyota dealer as the tire pressure warning valves and transmitters may be damaged if not handled cor- rectly.
Page 330: Tire Inflation Pressure
4-3. Do-it-yourself maintenance Tire inflation pressure Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis- played on the tire and loading information label. (→P. 400)
Page 331 4-3. Do-it-yourself maintenance Inspection and adjustment procedure Tire valve Tire pressure gauge STEP Remove the tire valve cap. STEP Press the tip of the tire pressure gauge onto the tire valve. STEP Read the pressure using the graduations of the gauge. STEP If the tire inflation pressure is not at the recommended level adjust the pressure.
Page 332 Reduced driving comfort and tire life Reduced safety Damage to the drive train If a tire needs frequent refilling, have it checked by your Toyota dealer. Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: Check only when the tires are cold.
Page 333 4-3. Do-it-yourself maintenance CAUTION Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. Excessive wear Uneven wear Poor handling Possibility of blowouts resulting from overheated tires Poor sealing of the tire bead Wheel deformation and/or tire separation A greater possibility of tire damage from road hazards...
Page 334: Wheels
Used wheels l Bent wheels that have been straightened Aluminum wheel precautions l Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. l When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 335 4-3. Do-it-yourself maintenance When replacing wheels The wheels of your Toyota, except for the compact spare tire, are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advanced warning in the event of a loss in tire inflation pressure. Whenever wheels are replaced, the tire pressure warning valves and transmitters must be installed.
Page 336: Air Conditioning Filter
4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method STEP Turn the engine switch OFF. Open the glove box. Slide off STEP the damper. Push in each side of the glove STEP box to disconnect the claws.
Page 337 4-3. Do-it-yourself maintenance Replacement method Remove the air conditioning filter and replace it with a new one. The “↑UP” marks shown on the filter should be pointing up. Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule.
Page 338: Key Battery (Vehicles With Wireless Remote Control)
4-3. Do-it-yourself maintenance Key battery (vehicles with wireless remote control) Replace the battery with a new one if it is discharged. You will need the following items: l Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with a rag.) l Lithium battery CR2025 Replacing the battery Remove the cover.
Page 339 The wireless remote control will not function properly. The operational range is reduced. Use CR2025 lithium battery Batteries can be purchased at your Toyota dealer, jewelers, or camera stores. Replace only with the same or equivalent type recommended by your Toyota dealer.
Page 340 4-3. Do-it-yourself maintenance NOTICE For normal operation after replacing the battery Observe the following precautions to prevent accidents. Always work with dry hands. Moisture may cause the battery to rust. Do not touch or move any other components inside the remote control. Do not bend either of the battery terminals.
Page 341: Checking And Replacing Fuses
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. STEP Turn the engine switch OFF. STEP Open the fuse box cover. Engine compartment Push the tab in and lift the lid off.
Page 342 4-3. Do-it-yourself maintenance Take out the pullout tool. STEP Only type A fuse can be removed using the pullout tool. STEP For type A and B fuses: Remove the fuse. STEP Check if the fuse has blown. Type A Normal fuse Blown fuse Replace it with one of an appropriate amperage rating.
Page 343 4-3. Do-it-yourself maintenance Type C Normal fuse Blown fuse Contact your Toyota dealer. Type D Normal fuse Blown fuse Contact your Toyota dealer.
Page 344 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings Engine compartment Fuse Ampere Circuit CDS FAN 30 A Electric cooling fan(s) RDI FAN 40 A Electric cooling fan(s) Anti-lock brake system, vehicle sta- ABS NO. 3 30 A bility control system Anti-lock brake system, vehicle sta- ABS NO.
Page 345 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 60 A Electric power steering 50 A EFI MAIN, HORN, IG2 H-LP LH LO, H-LP RH LO, H-LP H-LP MAIN 50 A LH HI, H-LP RH HI EFI NO. 2 10 A Emission control system Multiport fuel injection system/ EFI NO.
Page 346 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Main body ECU, gauge and meters, daytime running light sys- ECU-B 10 A tem, air conditioning system, wire- less remote control RAD NO. 1 15 A Audio system DOME 10 A Interior lights, personal light, clock SPARE 10 A Spare fuse...
Page 347 4-3. Do-it-yourself maintenance Under the driver’s side instrument panel Fuse Ampere Circuit Parking lights, tail lights, license plate lights, multiport fuel injection TAIL 10 A system/sequential multiport fuel injection system, instrument cluster lights PANEL 7.5 A Switch illumination FR DOOR 20 A Power windows RL DOOR...
Page 348 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Air conditioning system, rear win- HTR-IG 10 A dow defogger WIPER 25 A Windshield wipers RR WIPER 15 A Rear window wiper WASHER 15 A Windshield washer Main body ECU, electric power steering, electric cooling fan(s), shift lock control system, anti-lock brake system, multiport fuel injec- ECU-IG NO.
Page 349 Never use a fuse of a higher amperage rating than indicated, or use any other object in place of a fuse. Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix.
Page 350: Light Bulbs
You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 351 4-3. Do-it-yourself maintenance Rear bulb locations Rear turn signal lights Back-up lights Stop/tail and rear side marker lights License plate lights...
Page 352 4-3. Do-it-yourself maintenance Replacing light bulbs Headlight low beams Turn the bulb base counterclock- STEP wise. Unplug the bulb while depress- STEP ing the lock release. Headlight high beams Turn the bulb base counterclock- STEP wise.
Page 353 4-3. Do-it-yourself maintenance Unplug the bulb while depress- STEP ing the lock release. Front fog lights (if equipped) Remove the fender liner bolts STEP and clip. Partly remove the fender liner. STEP Turn the bulb base counterclock- STEP wise.
Page 354 4-3. Do-it-yourself maintenance Unplug the bulb while depress- STEP ing the lock release. Front turn signal/parking and front side marker lights Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP...
Page 355 4-3. Do-it-yourself maintenance Stop/tail and rear side marker lights, rear turn signal lights and back-up lights STEP Open the back door. Left side Remove the cover. STEP Right side (type A) Remove the cover using the flat- STEP head screwdriver. To protect the cover, place a rag between the flathead screwdriver and the cover.
Page 356 4-3. Do-it-yourself maintenance Turn the bulb base counterclock- STEP wise. Rear turn signal light Back-up light Stop/tail and rear side marker light Remove the light bulb. STEP Rear turn signal light Back-up light Stop/tail and rear side marker light...
Page 357 STEP wise. Remove the light bulb. STEP LED high mounted stoplight The high mounted stoplight consists of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
Page 358 4-3. Do-it-yourself maintenance Condensation build-up on the inside of the lens Contact your Toyota dealer for more information in the following situations. Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. Large drops of water are built up on the inside of the lens.
Page 359: Essential Information
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 360 5-1. Essential information Emergency towing If a tow truck is not available, in an emergency your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelet. This should only be attempted on hard surfaced roads for short distances at low speeds.
Page 361 5-1. Essential information Emergency towing procedure STEP Release the parking brake. STEP Shift the shift lever to N. STEP Turn the engine switch to the “ACC” (engine off) or “ON” (engine running) position. CAUTION Caution while towing Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing eyelets and the cables or chains.
Page 362 5-1. Essential information Towing with a sling-type truck NOTICE To prevent body damage Do not tow with a sling-type truck, either from the front or rear. Towing with a wheel-lift type truck from the front 2WD models Release the parking brake.
Page 363 5-1. Essential information AWD models Use a towing dolly under the rear wheels. NOTICE To prevent damaging the vehicle When raising the vehicle, ensure adequate ground clearance for towing at the opposite end of the raised vehicle. Without adequate clearance, the vehicle could be damaged while being towed.
Page 364 5-1. Essential information NOTICE To prevent causing serious damage to the transmission (vehicles with an automatic transmission) Never tow this vehicle from the rear with the front wheels on the ground. To prevent damaging the vehicle (vehicles with a manual transmission) Do not tow the vehicle when the engine switch is in the “LOCK”...
Page 365: If You Think Something Is Wrong
5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms l Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 366: Fuel Pump Shut Off System
5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an air- bag inflates upon collision, the fuel pump shut off system stops sup- plying fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 367: Event Data Recorder
5-1. Essential information Event data recorder Your vehicle has computers that monitor and control certain aspects of your vehicle. These computers assist in driving and maintaining optimal vehicle performance. Besides storing data useful for troubleshooting, there is an event data recorder (EDR) that records data in a crash or a near car crash event.
Page 368 5-1. Essential information Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third party except when: l An agreement from the vehicle's owner (or the leasing company for a leased vehicle) is obtained...
Page 369: Steps To Take In An Emergency
Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys- tem. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Brake system warning light (warning buzzer)* •...
Page 370 Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Indicates a malfunction in: (U.S.A.)
Page 371 If it is, tighten it securely. The malfunction indicator lamp will go off after taking several driving trips. If the malfunction indicator lamp does not go off even after several trips, con- tact your Toyota dealer as soon as possible.
Page 372 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Warning light Warning light/Details Correction procedure Open door warning light Check that all doors are Indicates that a door is not closed.
Page 373 1 minute: Have the system checked Malfunction in the tire by your Toyota dealer. pressure warning system. *: Driver's and front passenger’s seat belt warning buzzers: The driver’s and front passenger’s seat belts warning buzzers sound to alert the driver and front passenger that his or her seat belt is not fastened.
Page 374 5-2. Steps to take in an emergency Front passenger detection sensor and passenger seat belt reminder If luggage is placed on the front passenger seat, the front passenger detection sensor may cause the warning light to flash, even if a passen- ger is not sitting in the seat.
Page 375 If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.)
Page 376 Customization that can be configured at Toyota dealer The vehicle speed linked seat belt reminder buzzer can be disabled. (Customizable features →P. 420) However, Toyota recommends that the seat belt reminder buzzer be operational to alert the driver and front passen- ger that the seat belts are not fastened.
Page 377 5-2. Steps to take in an emergency CAUTION Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
Page 378 5-2. Steps to take in an emergency CAUTION Your vehicle has also been equipped with a TPMS (tire pressure warning system) malfunction indicator to indicate when the system is not operat- ing properly. The TPMS (tire pressure warning system) malfunction indi- cator is combined with the low tire pressure telltale (tire pressure warning light).
Page 379: If You Have A Flat Tire
5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. Before jacking up the vehicle l Stop the vehicle on a hard, flat surface. l Set the parking brake. l Shift the shift lever to P (automatic transmission) or R (manual transmission).
Page 380 5-2. Steps to take in an emergency Taking out the jack Turn the knobs to the “UNLOCK” STEP position and remove the deck board. Remove the hook. STEP...
Page 381 5-2. Steps to take in an emergency Taking out the spare tire Turn the knobs to the “UNLOCK” STEP position and remove the deck boards. Loosen the center fastener that STEP secures the spare tire.
Page 382 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. STEP Wheel Flat tire chock posi- tions Behind the Left- rear right- hand hand side side tire Front Behind the Right- rear left- hand hand side side tire In front of...
Page 383 5-2. Steps to take in an emergency Slightly loosen the wheel nuts STEP (one turn). Turn the tire jack portion “A” by STEP hand until the notch of the jack is in contact with the jack point. The jack point guides are located under the rocker panel.
Page 384 5-2. Steps to take in an emergency Raise the vehicle until the tire is STEP slightly raised off the ground. Remove all the wheel nuts and STEP the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.
Page 385 5-2. Steps to take in an emergency Installing the tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle.
Page 386 5-2. Steps to take in an emergency Lower the vehicle. STEP Firmly tighten each nut two or STEP three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) STEP Stow the flat tire, tire jack and all tools. Stowing the flat tire Vehicles with aluminum wheel: STEP...
Page 387 5-2. Steps to take in an emergency Put the flat tire on the deck STEP boards with the outer side of the wheel facing up. Hook the belt clips closest to the buckles onto the front cargo hooks. Pass the belts through the center STEP hole of the wheel.
Page 388 5-2. Steps to take in an emergency Pull the ends of the belts to STEP secure the tire. The compact spare tire The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall. Use the compact spare tire temporarily only in an emergency. Make sure to check the tire pressure of the compact spare tire.
Page 389 5-2. Steps to take in an emergency CAUTION Using the tire jack Improper use of the tire jack may lead to death or injuries due to the vehicle suddenly falling off the jack. Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
Page 390 5-2. Steps to take in an emergency CAUTION Replacing a flat tire Observe the following precautions to reduce the risk of death or serious injury: Never use oil or grease on the wheel bolts or wheel nuts. The oil or grease can cause the wheel nuts to loosen, causing a seri- ous accident.
Page 391 5-2. Steps to take in an emergency CAUTION When the spare tire is attached The vehicle speed may not be correctly detected, and the following sys- tems may not operate correctly: ABS & Brake assist VSC (if equipped) TRAC (if equipped) Navigation system (if equipped) Also, not only can the following system not be utilized fully, it may actu- ally negatively effect the drive-train components:...
Page 392 When replacing the tires When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled correctly. To avoid damaging the tire pressure warning valves and transmit- ters Do not use liquid sealants on flat tires.
Page 393: If The Engine Will Not Start
One of the following may be the cause of the problem. l One or both of the battery terminals may be disconnected. l The battery may be discharged. (→P. 379) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown.
Page 394: If The Shift Lever Cannot Be Shifted From P (Automatic Transmission)
(a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 395: If You Lose Your Keys
5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. Bring a mas- ter key and the key number stamped on the key number plate.
Page 396: If The Battery Is Discharged
You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your Toyota following the steps below. 1.8 L 4-cylinder (2ZR-FE) engine Remove the engine cover.
Page 397 STEP Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible.
Page 398 5-2. Steps to take in an emergency 2.4 L 4-cylinder (2AZ-FE) engine STEP Connecting the jumper cables If required, remove all vent plugs from the booster battery. Lay a cloth over the open vents on the booster battery. (This helps reduce the explosion hazard, personal injuries and burns.) Positive (+) battery terminal on your vehicle Positive (+) battery terminal on the second vehicle...
Page 399 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible. Avoiding a discharged battery Turn off the headlights and the audio system while the engine is turned off.
Page 400 5-2. Steps to take in an emergency CAUTION Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery. Make sure the jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any part other than the intended termi- nal.
Page 401 5-2. Steps to take in an emergency NOTICE To prevent damage to the vehicle Do not pull- or push-start the vehicle, because the catalytic converter may overheat and become a fire hazard. When handling jumper cables Be careful that the jumper cables do not become tangled in the cooling fans or any of the belts when connecting or disconnecting them.
Page 402: If Your Vehicle Overheats
Wait until the temperature of the engine (shown on the instrument cluster) begins to fall and then stop the engine. If the fans are not operating: Stop the engine and call your Toyota dealer. After the engine has cooled STEP STEP...
Page 403 (→ unavailable. P. 396 Have the vehicle checked at the nearest Toyota dealer as soon as possible. Overheating If you observe the following, your vehicle may be overheating. The engine coolant temperature gauge enters the red zone or a loss of power is experienced.
Page 404 5-2. Steps to take in an emergency NOTICE When adding engine coolant Wait until the engine has cooled down before adding engine coolant. When adding coolant, do so slowly. Adding cool coolant to a hot engine too quickly can cause damage to the engine.
Page 405: If The Vehicle Becomes Stuck
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. STEP Stop the engine. Set the parking brake and put the shift lever in P (automatic transmission) or N (manual transmis- sion).
Page 406: Specifications
6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights 171.9 in. (4365 mm) Overall length 173.0 in. (4395 mm) Overall width 69.5 in (1765 mm) 61.0 in (1550 mm) Overall height 61.4 in (1560 mm) Wheelbase 102.4 in (2600 mm) Front 59.8 in (1519 mm) Tread...
Page 407 Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
Page 408 6-1. Specifications Engine number The engine number is stamped on the engine block as shown. 1.8 L 4-cylinder (2ZR-FE) engine 2.4 L 4-cylinder (2AZ-FE) engine...
Page 409 6-1. Specifications Engine 1.8 L 4-cylinder (2ZR-FE) engine Model 2ZR-FE engine 4 cylinder in line, Type 4 cycle, gasoline 3.17 × 3.48 in. Bore and stroke (80.5 × 88.3 mm) Displacement 109.7 cu.in. (1798 cm Drive belt tension 143 ± 22 lb. Valve clearance (engine cold) Intake Automatic adjustment...
Page 410 6-1. Specifications 2.4 L 4-cylinder (2AZ-FE) engine Model 2AZ-FE engine 4 cylinder in line, Type 4 cycle, gasoline 3.48 × 3.78 in. Bore and stroke (88.5 × 96.0 mm) Displacement 144.1 cu.in. (2362 cm Drive belt tension Automatic adjustment Valve clearance (engine cold) 0.007 ⎯...
Page 411 4.1 qt. (3.9 L, 3.4 Imp.qt.) 2.4 L 4-cylinder (2AZ-FE) engine 3.8 qt. (3.6 L, 3.2 Imp.qt.) Oil grade ILSAC multigrade engine oil Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the grade and vis- cosity shown below. Recommended oil viscosity...
Page 412 (Reference) 2.4 L 4-cylinder (2AZ-FE) engine 6.0 qt. (5.7 L, 5.0 Imp.qt.) Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based non-silicate, Coolant type non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 413 Recommended gear oil SAE 75W viscosity Automatic transaxle 1.8 L 4-cylinder (2ZR-FE) engine Fluid capacity 2.6 qt. (2.5 L, 2.2 Imp.qt.) (drain and refill) 2.4 L 4-cylinder (2AZ-FE) engine 3.7 qt. (3.5 L, 3.1 Imp.qt.) Fluid type Toyota Genuine ATF WS...
Page 414 6-1. Specifications NOTICE Automatic transmission fluid type Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the transmission of your vehicle. Rear differential (AWD models) Oil capacity 0.5 qt.
Page 415 6-1. Specifications Brakes 1.8 L 4-cylinder (2ZR-FE) engine • With vehicle stability control: 3.4 in. (87 mm) • Without vehicle stability control: 3.2 in. (81 mm) Pedal clearance 2.4 L 4-cylinder (2AZ-FE) engine • AWD models: 3.4 in. (87 mm) •...
Page 416 6-1. Specifications Steering Free play Less than 1.2 in. (30 mm) Tires and wheels Type A Tire size P205/55R16 89H, T135/70R16 100M Tire inflation pressure Front: 32 psi (220 kPa, 2.2 kgf/cm or bar) (Recommended cold tire Rear: 32 psi (220 kPa, 2.2 kgf/cm or bar) inflation pressure) Spare: 60 psi (420 kPa, 4.2 kgf/cm...
Page 417 6-1. Specifications Type C Tire size P205/55R16 89H, T135/70R17 102M 2WD models Front: 32 psi (220 kPa, 2.2 kgf/cm bar) Rear: 32 psi (220 kPa, 2.2 kgf/cm bar) Spare: 60 psi (420 kPa, 4.2 kgf/cm Tire inflation pressure bar) (Recommended cold tire AWD models inflation pressure) Front: 35 psi (240 kPa, 2.4 kgf/cm...
Page 418 6-1. Specifications Type E Tire size P215/45R17 87W, T135/80R16 101M Tire inflation pressure Front: 32 psi (220 kPa, 2.2 kgf/cm or bar) (Recommended cold tire Rear: 32 psi (220 kPa, 2.2 kgf/cm or bar) inflation pressure) Spare: 60 psi (420 kPa, 4.2 kgf/cm or bar) 17 ×...
Page 419 6-1. Specifications Type G Tire size P215/45R18 89W, T135/70R17 102M Tire inflation pressure Front: 32 psi (220 kPa, 2.2 kgf/cm or bar) (Recommended cold tire Rear: 32 psi (220 kPa, 2.2 kgf/cm or bar) inflation pressure) Spare: 60 psi (420 kPa, 4.2 kgf/cm or bar) 18 ×...
Page 420 6-1. Specifications Light bulbs Light Bulbs Bulb No. Type Headlights Low beam 9006 High beam 9005 Front turn signal/park- ing and front side 3457NA 27/7 marker lights Front fog lights (if ⎯ Exterior equipped) ⎯ Rear turn signal lights Stop/tail and rear side 7443 21/5 marker lights...
Page 421: Fuel Information
ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada. Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. If your engine knocks Consult your Toyota dealer.
Page 422 Toyota allows the use of oxygenate blended gasoline where the oxygen- ate content is up to 10% ethanol or 15% MTBE. If you use gasohol in your Toyota, be sure that it has an octane rating no lower than 87.
Page 423 6-1. Specifications NOTICE Notice on gasoline quality Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s catalytic converters causing the emission control system to malfunction. Do not use gasohol other than that stated here. Other gasohol may cause fuel system damage or vehicle performance problems.
Page 424: Tire Information
6-1. Specifications Tire information Typical tire symbols Full-size tire Compact spare tire Tire size (→P. 411) DOT and Tire Identification Number (TIN) (→P. 410) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location of treadwear indicators (→P.
Page 425 6-1. Specifications Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL”...
Page 426 6-1. Specifications Typical DOT and Tire Identification Number (TIN) DOT symbol Tire Identification Number (TIN) Tire manufacturer's identifica- tion mark Tire size code Manufacturer's optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Federal...
Page 427 6-1. Specifications Tire size Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 or 3 digits) Speed symbol...
Page 428 U.S.A. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
Page 429 6-1. Specifications Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speci- fied government test course. For example, a tire graded 150 would wear one and a half (1-1/2) times as well on the government course as a tire graded 100.
Page 430 6-1. Specifications Warning: The temperature grades for this tire are established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sepa- rately or in combination, can cause heat buildup and possible tire fail- ure.
Page 431 6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as speci- Occupant distribution fied in the third column of Table 1 below The combined weight of installed regular pro- duction options weighing over 5 lb.
Page 432 6-1. Specifications Tire related term Meaning The surface area of the rim not covered by the Weather side inflated tire The part of the tire that is made of steel wires, Bead wrapped or reinforced by ply cords and that is shaped to fit the rim A breakdown of the bond between components Bead separation...
Page 433 6-1. Specifications Tire related term Meaning The parting of the innerliner from cord material Innerliner separation in the carcass (a) The sidewall that contains a whitewall, bears white lettering, or bears manufac- turer, brand, and/or model name molding that is higher or deeper than the same Intended outboard molding on the other sidewall of the tire, or sidewall...
Page 434 6-1. Specifications Tire related term Meaning A layer of rubber-coated parallel cords A parting of rubber compound between adja- Ply separation cent plies A mechanical device made of rubber, chemi- cals, fabric and steel or other materials, that, Pneumatic tire when mounted on an automotive wheel, pro- vides the traction and contains the gas or fluid that sustains the load...
Page 435 6-1. Specifications Tire related term Meaning That portion of a tire that comes into contact Tread with the road A tread section running circumferentially Tread rib around a tire Tread separation Pulling away of the tread from the tire carcass The projections within the principal grooves Treadwear indicators designed to give a visual indication of the...
Page 436: Customization
Your vehicle includes a variety of electronic features that can be per- sonalized to your preferences. Programming these preferences requires specialized equipment and may be performed by your Toy- ota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer. Customized Item Function Default setting...
Page 437 6-2. Customization Customized Item Function Default setting setting Driver's door unlocked in one All doors Unlocking using a key step, all doors unlocked in one unlocked in two step steps Opening driver's door Door lock unlocks all doors (vehicles with power Shifting gears to P door lock unlocks all doors.
Page 438: Initialization
6-3. Initialization Items to initialize The following items must be initialized for normal system operation in cases such as after maintenance is performed on the vehicle. Item When to initialize Reference Engine oil mainte- nance data After changing engine oil P.
Page 439: Reporting Safety Defects For U.s. Owners
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 440: Seat Belt Instructions For Canadian Owners (In French)
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité...
Page 441 Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eau savonneuse tiède. Profitez l'occasion pour vérifier régulièrement que les ceintures ne sont pas effilochées, entaillées, ou ne paraissent pas exagérément usées. ATTENTION ■ Détérioration et usure des ceintures de sécurité Inspectez les ceintures de sécurité...
Page 442: Alphabetical Index
Alphabetical index Alphabetical index A/C ..........162 Audio system ABS........... 135 Antenna.........175 Active torque control 4WD Audio input ......196 system ........135 AUX adapter......196 Air conditioning filter....318 CD player/changer ....178 Air conditioning system MP3/WMA disc......185 Air conditioning filter ..... 318 Optimal use ......193 Air conditioning Portable music player....196...
Page 443 Alphabetical index Care Child safety Exterior........268 Airbag precautions ....72 Interior ........270 Battery precautions ..300, 383 Seat belts ......271 Child restraint system .....82 Cargo capacity ......140 Child-protectors.......30 Cargo hooks ......255 How your child should wear CD changer.......178 the seat belt ......43 CD player ........178 Installing child restraints..86 Chains ........144...
Page 444 Alphabetical index Daytime running light If you have a flat tire .....362 system ........126 If you lose your keys .....378 Defogger If you think something is Rear window......168 wrong ........348 Side mirror......168 If your vehicle becomes Dimension........ 390 stuck ........388 Dinghy towing ....
Page 445 Alphabetical index Floor mat........254 Gas station information ..440 Fluid Gauges........119 Brake........297 Glove box ......... 237 Washer........301 Grocery bag hooks ....251 Fog lights Replacing light bulbs .....332 Hands-free phone system Switch........128 (for cellular phone)....200 Wattage.........404 Head restraints Front passenger occupant Adjusting ........40 classification system ....77...
Page 446 Alphabetical index I/M test........278 License plate lights Identification number Replacing light bulbs .....332 Engine ........391 Switch........125 Vehicle........391 Wattage.........404 Ignition switch ......106 Light bulbs Illuminated entry system ..233 Replacing ......332 Indicator lights ......122 Wattage.........404 Initialization Lights Items to initialize....
Page 447 Alphabetical index Odometer ........119 Radiator ........296 Radio......... 172 Engine oil ......290 Rear side marker lights Opener Replacing light bulb....332 Fuel filler door ......56 Switch ........125 Hood........283 Wattage......... 404 Outside rear view mirrors Rear seats Adjusting and folding....49 Folding down......38 Outside temperature Rear turn signal lights...
Page 448 Alphabetical index Seatback table ......253 Side marker lights Seat belts Replacing light bulbs .....332 Adjusting the seat belt .... 41 Switch........125 Automatic Locking Wattage.........404 Retractor ......42 Side mirror Child restraint system Adjusting .........49 installation ......86 Spare tire Cleaning and maintaining Inflation pressure....312 the seat belts......
Page 449 Alphabetical index Tachometer.......119 Tires Tail lights Chains........144 Replacing light bulbs .....332 Checking ....... 303 Switch........125 If you have a flat tire....362 Wattage.........404 Inflation pressure ....312 Theft deterrent system Inflation pressure sensor..304 Engine immobilizer system ..60 Replacing ......362 Theft prevention labels....62 Rotating tires......
Page 450 Alphabetical index Vanity mirrors......245 Washer Vehicle identification Checking .......301 number........391 Preparing and checking Vehicle stability control..136 before winter .......144 VSC........... 136 Switch........129 Washing and waxing ....268 Weight Warning buzzers Cargo capacity ......140 Brake system......352 Load limits ......143 Downshifting......
Page 451: What To Do If
What to do if... What to do if... If you have a flat tire A tire punctures P. 362 P. 376 If the engine will not start The engine does not start P. 60 Engine immobilizer system P. 379 If the battery is discharged If the shift lever cannot be shifted The shift lever cannot be P.
Page 452 What to do if... nWarning lights Brake system warning Active torque control 4WD sys- light tem warning light P. 353 Engine oil replacement reminder light P. 352 P. 355 Charging system warn- Tire pressure warning ing light light P. 353 P.
Page 453: Gas Station Information
GAS STATION INFORMATION Auxiliary catch lever Fuel filler door P. 283 P. 56 Hood lock release lever Fuel filler door opener Tire inflation pressure P. 283 P. 56 P. 400 Fuel tank capacity 13.2 gal. (50 L, 10.9 Imp.gal.) Fuel type Unleaded gasoline only P.

Toyota 2009 Matrix Owner's Manual

Table of Contents

Table of Contents

Before Driving/When Driving

Key Information

Opening, Closing and Locking the Doors

Adjustable Components (Seats, Mirrors, Steering Wheel)

Opening and Closing the Windows

Refueling

Theft Deterrent System

Safety Information

Driving Procedures

Instrument Cluster

Operating the Lights and Wipers

Using Other Driving Systems

Driving Information

Using the Air Conditioning System and Defogger

Using the Audio System

3-3. Using the Hands-Free Phone System (for Cellular Phone)

Using the Hands-Free Phone System (for Cellular Phone)

Using the Interior Lights

Using the Storage Features

Other Interior Features

Maintenance and Care

Maintenance

Do-It-Yourself Maintenance

Essential Information

Steps to Take in an Emergency

Specifications

Customization

Initialization

Alphabetical Index

What to Do if

Quick Links

Chapters

Related Manuals for Toyota 2009 Matrix

Summary of Contents for Toyota 2009 Matrix