Advertisement
6
With the unit off, press
down. Gently squeeze the release tab located on the bottom
center underside and pull front panel down and away from
unit to remove. To install, insert left side first, then push right
side to secure.
Press
for 2 seconds or any other button momentarily
to turn the unit on. Inserting a disc will turn the unit on
automatically. Press
Press
to select between AM/FM, CD player, auxiliary
input, iPod (optional), and Bluetooth (optional). Modes of
operation are indicated in the display.
: CD, iPod, and Bluetooth modes will not appear unless
a CD is inserted, IPC2M (iPod cable) and iPod are attached, or
BTM60 (Bluetooth module) is attached.
Adjust volume using rotary encoder (00-46).
Rotate the
While the volume is still displayed, press
currently selected volume level. "P-VOL" and the current
volume level will momentarily appear in the display.
Press
to select between POP, JAZZ, CLASSIC, BEAT,
ROCK and OFF (default) equalization curves. Any adjustment
to the Bass or Treble settings automatically cancels the
current EQ curve (if one is selected).
When in AM/FM, CD, AUX or iPod mode:
Press
to select between clock and radio frequency
(tuner mode), clock and CD elapsed time/track (CD mode),
clock and AUX (AUX mode), elapsed time, track number,
clock, title, artist or album (iPod mode).
With the unit on, press and hold
flash, then release. Press
ll
to adjust the minutes. Press
save the selected time.
to allow the front panel to slide
for 2 seconds to turn the unit off.
to the preferred volume level.
until the clock begins to
nn
to adjust the hours and
momentarily to
to program
Advertisement
