Radio - Kenwood DDX9716BTS Instruction Manual

Radio

Listening to the radio
❏ Indications and buttons on the source
control screen
1 2 3
5 6 7 8 9 p
Radio reception information
1 Preset no.
2 Seek mode (See the right column.)
3 Text information
• Touching [<] scrolls the text if not all of the
text is shown.
• Touching [ ] switches the information as
follows:
– Frequency/PS name/Radio Text/title and
artist
– Frequency/PTY genre/Radio Text plus
4 Preset list (Page 28)
5 Standby reception indicators (Page 29)
6 AF indicator (Page 30)
7 LO.S indicator (See the far right column.)
8 ST/MONO indicator: Lights up when receiving
an FM stereo broadcast with sufficient signal
strength.
9 RDS indicator: Lights up when receiving a Radio
Data System station.
p EON indicator: Lights up when a Radio Data
System station is sending EON signals.
Operation buttons
[AUTO1]/ Changes the seek mode. Each time
[AUTO2]/
you touch the button, the seek mode
[MANUAL] changes as follows:
• AUTO1: Auto search
4
• AUTO2: Tunes in stations in the
memory one after another.
• MANUAL: Manual search
[ ] Displays the other operation button
window.
• To hide the window, touch [ ].
Displays the preset list.
[ ]
• To hide the list, touch [ ].
[AM]
Selects the AM band.
[FM] Selects the FM band.
Displays the <Graphic Equalizer>
[ ]
screen. (Page 54)
[S] [T] Searches for a station.
• The search method differs
according to the selected seek
mode. (See above.)
[TI]* Activates/deactivates TI standby
reception mode. (Page 29)
[SETUP] Changes the settings for radio
reception on the <Radio SETUP>
screen. (Pages 29 – 30)
[AME] Presets stations automatically.
(Page 28)
[PTY]* Enters PTY search mode. (Page 28)
[MONO]
Activates/deactivates monaural mode
for better FM reception. (Stereo effect
will be lost.)
• The MONO indicator lights up while
monaural mode is activated.
[LO.S]* Activates/deactivates the local seek
mode (See the right column.)
• To display all available operation buttons, touch
[ ] to display the other operation button window.
* Appears only when FM is selected as the band.
❏ Tuning in FM stations only with strong
signals — Local Seek
1
Display the <Radio SETUP> screen.
2
The unit tunes in only to stations with sufficient
signal strength. The LO.S indicator lights up.
• You can also activate/deactivate the local seek by
touching [LO.S] on the other operation button
window.
To deactivate the Local function: Touch [LO.S] to
select [OFF]. The LO.S indicator turns off.
ENGLISH 27