Discs - Kenwood DDX9716BTS Instruction Manual

DISCS

Playing a disc
• If a disc does not have a disc menu, all tracks on
it will be played repeatedly until you change the
source or eject the disc.
• For playable disc types/file types, see page 76.
❏ Inserting a disc
Insert a disc with the label side facing up.
• For DDX9716BTS/DDX9716BTSR: To open the
monitor panel, see page 8.
DDX9716BTS
DDX9716BTSR
DDX8016DABS
The source changes to "DISC" and playback starts.
• The IN indicator lights up while a disc is inserted.
14
• If " " appears on the screen, the unit cannot
accept the operation you have tried to do.
– In some cases, without showing "
operations will not be accepted.
• When playing back a multi-channel encoded
disc, the multi-channel signals are downmixed
to stereo.
❏ Ejecting a disc
DDX9716BTS/DDX9716BTSR
Press M on the monitor panel, then select [M DISC
EJECT] on the <Angle Adjust> screen.
DDX8016DABS
When removing a disc, pull it horizontally.
• You can eject a disc when playing another AV
source.
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to protect it from dust.
To eject a disc forcibly
Press and hold M on the monitor panel. A
confirmation message appears. Touch [Yes].
To close the monitor panel (Only for
DDX9716BTS/DDX9716BTSR)
After removing the disc, press M on the monitor
panel. The monitor panel closes.
Playback operations
When the operation buttons are
,"
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 58.
❏ Indications and buttons on the source
control screen
For video playback
1
Playback information
• The information displayed on the screen differs
depending on the type of disc/file being played
back.
1 Media type
2 Playback mode (Page 17)
3 Current playback item information (title no./
chapter no./folder no./file no./track no.)
4 IN indicator: A disc is inserted.
2 3
4