Downloaded From Dvdplayer-Manual.com Samsung Manuals - Samsung DVD-V4500 User Manual

12/10/03 10:57 AM Page 8
Connecting Other Video
tions
Equipment
mproved sound and You can connect a wide variety of audio/video
because they receive equipment to your DVD-VCR, including:
ctly from the DVD-VCR
• An additional VCR
• Laser Disc Player
ot the same as a • DVD Player
• Camcorder
• Satellite Receiver
• Video Game
V
Since all of these devices use essentially the same
e Audio/Video Line Out
connections, they will be described together.
DVD-VCR to the
ur monitor TV.
1 Connect Device to DVD-VCR
Connect RCA cables from the Audio and Video Line
Outputs of your external device to the Audio and
Video Line Inputs on rear panel of the DVD-VCR.
"Video," or "Line." Refer
Audio/Video Outputs of
ner's manual for the
External Device
2 Watch Device
Play your external device, then press the INPUT
SEL. button until the playback from Line (rear panel
inputs) appears on your TV screen.
3 Record Device
First, play your external device. Next, press the
INPUT SEL. button until the playback from Line
(rear panel inputs) appears on your TV screen. Then
press Record on the Front panel and Remote
Control.
4 Timer Record From Device
Select Line as your record source in the Timer
Record menu. All other Timer Record settings should
be set in the usual manner.
ENG-8

Downloaded From DvDPlayer-Manual.com Samsung Manuals

A/V Receiver Connections
To take full advantage of the movie theater experience
that DVD offers, you may want to connect your DVD-
VCR to a complete Surround Sound system, including
an A/V Receiver and six Surround Sound speakers.
Before You Begin...
• If your A/V receiver is equipped with a Dolby
Digital Decoder, you have the option to bypass the
DVD-VCR's built-in Dolby Digital Decoder. Use the
Digital Audio Out connection below.
To Digital Audio Input of an A/V
Receiver with a Dolby Digital Decoder
1 Digital Audio Out
Connect a digital coaxial cable from the Digital
Audio Out jack on the rear panel of the DVD-VCR
to the corresponding Digital Audio Input jack on
your A/V Receiver:
• Coaxial
• Use whichever connection is available on your
A/V Receiver.
Deck Control Buttons
The DVD-VCR uses one set of controls to operate both
decks. The following buttons are helpful in successfully
controlling each deck.
1 POWER Button
Press the POWER button on the remote control or
front panel to turn on the DVD-VCR.
2 DVD Button
Press the DVD button on the remote control or front
panel when you want to control the DVD deck.
• The DVD indicator will light on the Front Panel
Lamp to show that the DVD deck is selected.
3 VCR Button
Press the VCR button on the remote control or front
panel when you want to control the VCR deck.
• The VCR indicator will light on the Front Panel
Lamp to show that the VHS deck is selected.
4 INPUT SEL. Button
Press the INPUT SEL. button repeatedly to cycle
through all of your input sources, including the
Tuner(Ch##), Line (rear AV input).
• Input selection is only available when the VCR
deck is selected.
Basic DVD Operation
Follow the instructions below to playback a DVD.
1 Open the Disc Tray
Press the OPEN/CLOSE button on your remote
control or on the front panel of the unit to turn on
the power and open the disc tray.
2 Insert a Disc
Put a disc in the center of the tray, with the label-
printed side facing up.
3 Close the Disc Tray
Press the OPEN/CLOSE button on your remote
control or on the front panel of the unit to close the
disc tray.
4 Play a DVD
Press the ❿ll (PLAY/PAUSE) button on your remote
control or on the front panel of the unit.
• Most discs will start to playback as soon as the
tray closes.
• If a DVD has a MENU, the menu may pop up on
TV screen.
5 Additional DVD Options
• See pages 14 ~ 19 for advanced DVD Setup options.
• See pages 20 ~ 26 for special DVD Playback
features.
ENG-9