Change Log; Changes From 1.0.15.5 User Manual; Changes From 1.0.14.1 User Manual; Changes From 1.0.13.3 User Manual - Grandstream Networks HT503 User Manual

CHANGE LOG

This section documents significant changes from previous versions of HT503 user manuals. Only major
new features or major document updates are listed here. Minor updates for corrections or editing are not
documented here.

Changes from 1.0.15.5 User Manual


Added option to disable PnP subscribe feature [

Added option "DNS SRV use Registered IP" to control destination IP address for outbound request
under SRV mode [
DNS SRV use Registered IP

Split Layer 3 QoS into SIP and RTP [

Deactivated SIP INFO DTMF in SIP accept header. Added option "DTMF-RELAY Tag Respect SIP
INFO" [
DTMF-RELAY Tag Respect SIP INFO

Added configurable option to enable/disable Broadsoft Connected Line ID [

Added TLS/SSL certificate domain and chain validation [
 Updated LED light patterns to match HT70x's
 Customized HT503 timer for outgoing calls via FXO

Changes from 1.0.14.1 User Manual


Bugs fixed with no new feature added.

Changes from 1.0.13.3 User Manual

 Added feature [
Hold Target Before Refer
call before refer.

Added feature [
Crypto Life Time
time when using SRTP.

Added feature [
Crypto Life Time
life time when using SRTP.
 Added feature [
Play busy/reorder tone before Loop Current Disconnect
3CX Auto Provision
]
]
Layer 3 QoS
]
Authenticate Server Certificate Domain
[Advanced definitions of the HT50x LEDs patterns]
[PSTN Idle Wait Timeout between Outgoing Calls]
] in profile settings, which allows user
] in FXS port settings, which allows user to enable or disable Crypto life
] in FXO port settings, which allows user to enable or disable Crypto
HT503 User Manual
]
Disable Connected Line ID
to hold or not hold the phone
] in profile settings, which allows
P a g e
]
]
| 6