Table of Contents
Advertisement
6
Routing the antenna cable.
1. Route the cable using the provided cable clampers to take up
the cable's slack.
2. Use the waterproof pad when running the cable under the
vehicle's rubber gasket.
3. Attach the cable at several points using the remaining cable
clampers.
2. Connections
1
Disconnect the battery (–) terminal.
Note:
Some vehicles contain a vehicle control computer etc. in this case, contents of
the computer memory may be erased when the battery (–) lead is disconnected.
2
Parking Brake Lead Connection
If necessary, use a pinch connector to connect the parking brake lead, etc.
1
Vehicle Cable
PARKING BRAKE
NVE-N871A
8
Pinch Connector
Pinch Connector
(Yellow/Blue)
2
Navigation
Cable
Stopper
Parking brake lamp
Parking brake lead
Parking brake switch
Water
proof pad
Plier
Battery
Cable
clamper
Chassis
Advertisement
Table of Contents
