Table of Contents
Advertisement
3
Cut the carpet in "x" shape with a
cutter and insert the floor base 2
from under side of the carpet.
4
Mount the unit on the carpet with
spring washer (M6) 6 and wing nuts
(M6) 8.
Continued to 5. Securing leads, etc.
5
Securing leads, etc.
Take care wiring leads are not jammed by moving parts such as seat rail, etc. and not damaged by touching
protruded objects.
6
Connect the battery (–) terminal.
5. Confirmation
1
Turn on the engine key. Make sure
the unit is operating correctly by
referring to the Owner's Manual.
2
Make sure the electrical components
attached on the vehicle such as brake
lamp, stop lamp, etc. work correctly.
a Remote control holder mounting method
• If the remote control is in direct sunlight, remove it
from the holder and keep it in the glove box.
• When the holder cannot be mounted securely with
double-sided adhesive tape !, mount it by using
screws ".
ON
Reinforcement screws
Remote
control
Blue Protective
Paper
Console box, etc.
* Double-sided adhesive tape (Before putting on the
holder, clean dirt on the mounting location)
2
8
6
"
Remote control
holder
!*
17
Advertisement
Table of Contents
