Confirmation - Alpine NVE-N852A Manual For Installation And Connections

3
Cut the carpet in "x" shape with a
cutter and insert the floor base 2
from under side of the carpet.
4
Mount the unit on the carpet with
spring washer (M6) 6 and wing nuts
(M6) 8.
Continued to 5. Securing leads, etc.
5
Securing leads, etc.
Make sure leads are not pinched by moving parts such as the seat rail, etc. Also check for damaged from
sharp edges or protrusions.
6
Connect the battery (–) terminal.

5. Confirmation

1
Turn on the engine key. Make sure
the unit is operating correctly by
referring to the Owner's Manual.
2
Make sure all factory components
such as brake lamps, parking lamps,
etc. work correctly.
a Remote control holder mounting method
If the remote control is in direct sunlight, remove it
from the holder and keep it in the glove box.
When the holder cannot be mounted securely with
double-sided adhesive tape !, mount it by using
screws ".
12
ON
Reinforcement screws
Remote
control
Protective Paper
Console box, etc.
* Double-sided adhesive tape (Before putting on the
holder, clean dirt on the mounting location)
2
8
6
"
Remote control
holder
!*