Flooded Engine
If the engine fails to start after repeated
attempts, it may be flooded.
1. Leave the engine stop switch set to
o
(RUN).
2.
Open throttle fully.
3. Press the start button for 5 seconds.
4. Follow the normal starting procedure.
If the engine starts with unstable idle,
open the throttle slightly.
If the engine does not start, wait for 10
seconds, then follow steps 1-4 again
.
CD
Ignition Cut Off
Your
motorcycle
is
designed
to
automatically stop the engine and fuel
pump if the motorcycle is over-turned (a
banking sensor cuts off the ignition
system).
Before restarting the engine, you
must turn the ignition switch to the OFF
position and then back to ON.
81
•