•
WHEEL REMOVAL
Refer to the Safety Precautions on page 93.
This motorcycle is equipped with a side
stand only. Therefore, if front or rear
wheel removal is required, it will be
necessary to raise the center of the
motorcycle with a jack or other firm
support. If none is available, see your
Honda dealer for this
service.
Front Wheel Removal
1. Raise the front wheel off the ground by
placing a support block under the engine.
2. Remove the right and left caliper
assemblies (1) from the fork leg by
removing the fixing bolts (2).
To avoid damage to the brake hose,
support the caliper assembly so that it
doesn't hang from the hose. Do not twist
the brake hose.
122
(2)
(1) Brake
caliper
assembly
(2) Fixing bolts
(1)
(2)
CD