Specifications; Lubrication - Craftsman 235.185930 Owner's Manual

Your Impact Wrench incorporates
a Power Management System that
allows you to select four power
output settings. These settings
range from minimum power output
through maximum power output in
the forward direction only. The Air
Wrench will always operate at
maximum power output in the re-
verse direction, no matter what
power output level is selected.
NOTICE:
The four power setting
indicators of increasing size on the
rear of the housing are for refer-
Model Type of
185930 pistol grip
Forward
lb–ft
200–900
(1100 max.)

LUBRICATION

Use Craftsman No. 18830
Pneumatic Tool Care Kit or a good
quality SAE 20 or 20W motor oil.
Craftsman 18830 Oil
Craftsman 18830 Grease
for routine external lubrica-
tion of the impact mecha-
nism through the Hammer
Case Grease Fitting.

SPECIFICATIONS

Drive
Handle
3/4¨
Recommended Torque Range
Forward
Newton
meter (Nm)
271–1220
(1492 max.)
ence only and DO NOT denote a
specific power output. The small-
est power setting indicator desig-
nates minimum power output, the
two middle power setting indica-
tors denote medium power outputs
and the largest power setting indi-
cator denotes maximum power
output.
The power output can be further
reduced in forward or reverse by
using the variable throttle. Air sup-
ply systems which do not deliver
adequate air pressure can affect
power output at all settings.
Impacts
per min. Speed
1,175
Reverse
lb–ft
200–900
(1200 max.)
Always use an air line lubricator
with these tools.
CAUTION:
nonmetallic surface on this tool
with customer identification codes.
Such actions could affect tool per-
formance.
7
Free Weight
rpm
8,000 7 lbs.
Reverse
Newton
meter (Nm)
271–1220
(1627 max.)
Do not mark any