Delete The Entire Call List; Copying A Call List Entry Into Memory - VTech T1100 User Manual

DELETE THE ENTIRE CALL LIsT

1. Press and hold REMOVE when reviewing the call list
entries. The screen displays REMOVE ALL?.
2. Press REMOVE again to delete all the entries. The
screen displays -END OF LIST- and automatically
returns to idle mode.
- OR -
Press CLEAR to exit without deleting any entries
and return to idle mode.
Note: When an entry is removed from the call list, it
cannot be retrieved.

COPYING A CALL LIsT ENTRY INTO MEMORY

1. Lift the handset.
2. Press
3. Press PROG on the handset.
4. Press any one-touch memory location (M1, M2 or
M3) where you want the number to be stored.
- OR -
Press MEMORY, then press the dialing key (0 through
9) to select the desired speed dial memory location.
5. Press CLEAR on the back of the handset when you
have inished storing a number in the memory to
exit programming.
Note: If you wait longer than 10 seconds to delete or
copy the entry, the procedure will time out and you
have to begin again.
or to scroll to your desired entry.