VTech T1100 User Manual page 43

• Make sure to plug your USB telephone adapter into a
dedicated USB port on your computer. Do not plug it
into a multiple port USB hub (USB splitter) that is not
powered.
• In a few rare cases, the USB port on your computer
may not have enough power. In these cases, try using
a USB hub with its own external power supply.
If you are using a irewall, it may prevent access to
•
your nontraditional telephone service. Contact your
service provider for more information.
Common cure for electronic equipment:
If the telephone is not responding normally, try resetting
the telephone. Do the following in the order listed:
1. Disconnect the base battery.
2. Wait a few minutes.
3. Re-install the battery.
4. Wait for the handset to reestablish its connection
with the telephone base. Allow up to one minute for
this to take place.
TecHelp line 1300 369 193
Call TecHelp:
if you are having dificulties using your VTech T1100.
•
• if you need replacement batteries.