How To Operate The On-Screen Menu - Sanyo PLC-XU115 Owner's Manual

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
Press the MENU button on the top control or the
1
remote control to display the On-Screen Menu.
Use the Point

the Point
▲▼
menu.
Press the SELECT button to show the item data. Use

the Point
◄►
To close the On-Screen Menu, press the MENU button
again.

Note:
• The selected item is not active until the SELECT button
is pressed.

Downloaded From projector-manual.com Sanyo Manuals
buttons to select a Menu icon. Use
◄►
buttons to select an item in the selected
buttons to adjust the values.
Top Control
MENU button
POINT buttons
SELECT button
Remote Control
MENU button
On-Screen Menu
Menu bar
Pointer (red frame)
Press the Point buttons
▲▼
to move the pointer.
Item
SELECT
button
Press the SELECT button here
to display previous items.
Item data
Press the Point
buttons to adjust the
value.
Press the SELECT button here
to display next items.
Quit
Exit this menu.
POINT buttons
SELECT button
Menu icon
Pointer
(red frame)
◄►