How To Operate The On-Screen Menu - Sanyo PLC-XT30 Owner's Manual

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
1 Press the MENU button on the top control or the
remote control to display the On-Screen Menu.
2
Use the Point 7 8 buttons to select a Menu icon. Use
the Point buttons to select an item to in the
ed
selected menu.
3
Press the SELECT button to show the item data. Use
the Point buttons to adjust the values.
7 8
To close the On-Screen Menu, press the MENU
button again.
✔
Note:
•The selected item is not active until the SELECT button is pressed.
Top Control
Remote Control
MENU button
On-Screen Menu
Menu bar
Pointer (red frame )
Press the Point ed buttons
to move the pointer.
Item
SELECT
button
Item data
Press the Point
buttons to adjust the
value.
Quit
Exit this menu.
Basic Operation
MENU button
POINT buttons
SELECT button
POINT buttons
SELECT button
Menu icon
Pointer
(red frame )
7 8
27